Aluminum fence cost in Clarksville, TN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,450 – $10,400
- Per linear ft
- $22.50 – $69
- before permit
- Versus US midpoint
- −9%
- US $7,600
- Rank of 300 metros
- #243
- 1 = most expensive
Clarksville homeowners pay roughly $3,450 to $10,400 to install an aluminum fence at 150 linear ft, or $22.50 to $69 per linear ft (permit not included). Against the US midpoint, Clarksville is 9% lower. Carpenters earn a median of $23.60 an hour in the Clarksville area, 19% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Clarksville, TN, standard level
$5,550 to $8,350
About $36.50 to $55 per linear ft before permits. Labor is about 31% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,700 | $5,700 |
| Labor | $1,800 | $2,550 |
| Permits and fees | $65 | $110 |
| Total | $5,550 | $8,350 |
Cost breakdown for 150 linear ft in Clarksville, TN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,150 | $4,700 | $7,200 | 68% |
| Labor | $1,250 | $2,150 | $3,100 | 31% |
| Permits and fees | $35 | $85 | $140 | 1% |
| Total | $3,450 | $6,950 | $10,400 | 100% |
What is behind the Clarksville number
Labor is 31% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Clarksville the blended ratio comes out at 0.83.
On the materials line, the BEA goods price index for the Clarksville metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $4,700, compared with $4,900 at national prices. Permit and inspection fees are scaled by the broader index (90.9) and land at $35 to $140.
Is Clarksville cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,900 to $7,600 across Clarksville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Clarksville, TNthis page | $3,450 – $10,400 | $6,950 | |
| Nashville, TN65 miles | $3,650 – $11,000 | $7,300 | +5% |
| Bowling Green, KY70 miles | $3,500 – $10,600 | $7,050 | +1% |
| Evansville, IN95 miles | $3,850 – $11,400 | $7,600 | +10% |
| Jackson, TN95 miles | $3,550 – $10,700 | $7,150 | +3% |
| Huntsville, AL140 miles | $3,400 – $10,400 | $6,900 | −1% |
| Tennessee (statewide) | $3,550 – $10,800 | $7,150 | +3% |
| United States | $3,800 – $11,400 | $7,600 | +9% |
Across 300 US metros, Clarksville comes in at #243 from the top. The priciest is Honolulu, HI at $9,700; the cheapest is Brownsville, TX at $6,500 (midpoints, 150 linear ft). Statewide, Clarksville is 3% below the Tennessee figure.
Other Tennessee metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Nashville, TN | 1,099,300 jobs | $3,650 – $11,000 | $7,300 | +5% |
| Memphis, TN | 611,670 jobs | $3,550 – $10,800 | $7,150 | +3% |
| Knoxville, TN | 424,600 jobs | $3,600 – $10,800 | $7,200 | +4% |
| Chattanooga, TN | 268,750 jobs | $3,550 – $10,700 | $7,100 | +2% |
| Kingsport, TN | 119,560 jobs | $3,550 – $10,700 | $7,100 | +3% |
| Jackson, TN | 84,530 jobs | $3,550 – $10,700 | $7,150 | +3% |
Cities with a workforce like Clarksville's
Big cities and small ones price differently, so here is Clarksville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charleston, WV | 103,450 jobs | $3,650 – $10,900 | $7,250 | +5% |
| Lafayette, IN | 102,200 jobs | $3,750 – $11,100 | $7,450 | +7% |
| Gainesville, GA | 103,870 jobs | $3,400 – $10,300 | $6,850 | −1% |
| Lake Charles, LA | 101,690 jobs | $3,450 – $10,400 | $6,950 | level |
Pick a size, pick a tier: aluminum fence pricing in Clarksville
Three bands are cut from the same cited range and localized for Clarksville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$3,450 to $6,250
Standard picket or ornamental, 4 ft
Standard
$5,550 to $8,350
Ornamental pool-code fence, 4-5 ft
Premium
$7,650 to $10,400
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,300 – $4,200 | $3,700 – $5,600 | $5,150 – $7,000 |
| 150 ft (150 linear ft) | $3,450 – $6,250 | $5,550 – $8,350 | $7,650 – $10,400 |
| 200 ft (200 linear ft) | $4,550 – $8,300 | $7,350 – $11,100 | $10,200 – $13,900 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Clarksville is 0.83 times the national level.
For carpenters (47-2031, weighted 40%) the local median is $23.60 an hour, which is 19% below the national $29.12. The middle half of them earn between $21.48 and $28.68 an hour. BLS counts 290 of them working in the area, 28.1 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 40% of the weighting: a median of $20.17 an hour, 11% below the US median of $22.66. The middle half of them earn between $17.68 and $23.18 an hour. About 620 work in the metro. That is 60.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For sheet metal workers (47-2211, weighted 20%) the local median is $21.55 an hour, which is 27% below the national $29.71. The middle half of them earn between $18.64 and $29.11 an hour. BLS counts 50 of them working in the area, 4.8 for every 10,000 jobs (US: 7.7), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($28.68 an hour) instead of the median, the labor line grows by about $180. At the 25th percentile ($21.48) it shrinks by about $75. The total moves by 2.6% or 1.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 103,220 jobs in the Clarksville area. That makes it the 200th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $21.48 | $23.60 | $28.68 | $29.12 | 0.81 | metro |
| Construction laborers (47-2061) | 40% | $17.68 | $20.17 | $23.18 | $22.66 | 0.89 | metro |
| Sheet metal workers (47-2211) | 20% | $18.64 | $21.55 | $29.11 | $29.71 | 0.73 | metro |
| Blended | 100% | 0.83 | |||||
When to schedule aluminum fence in Clarksville
We use NOAA's 1991-2020 climate normals for Clarksville Wwtp (in the city). These are 30-year monthly averages, not forecasts.
September through June is the stretch where exterior installation runs into the fewest weather problems in Clarksville (10 of 12 months). July and August have an average daytime high of 90°F or more.
Clarksville gets about 54 inches of precipitation in a normal year. The wettest months are April, May and December (5.6 inches in May). Inside the workable window, January and September are the driest, at 4.0 and 3.4 inches. The station averages about 57 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 47 | 28 | 4.0 | Workable |
| Feb | 52 | 31 | 4.5 | Workable |
| Mar | 61 | 38 | 4.8 | Workable |
| Apr | 72 | 47 | 5.0 | Workable |
| May | 79 | 57 | 5.6 | Workable |
| Jun | 87 | 65 | 4.7 | Workable |
| Jul | 90 | 69 | 4.6 | Hot |
| Aug | 90 | 67 | 3.7 | Hot |
| Sep | 84 | 60 | 3.4 | Workable |
| Oct | 72 | 48 | 4.3 | Workable |
| Nov | 60 | 37 | 4.1 | Workable |
| Dec | 50 | 31 | 4.9 | Workable |
What nearby projects cost in Clarksville
Because every project leans on different trades, Clarksville's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −6% and chain-link fence −10%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,300 – $8,550 | −6% |
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Chain-link fence | 150 linear ft | $1,400 – $5,500 | −10% |
| Inground pool | 450 sq ft | $33,700 – $105,500 | −7% |
Extras that change the Clarksville total
Extras are quoted nationally and then scaled to Clarksville by the average of the local wage index (0.83) and goods index (0.96), a factor of 0.89. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $180 – $800 |
Specs and site conditions that change a Clarksville bid
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Pool codes
Many codes require a pool barrier with gaps under 4 inches, which influences the style you can buy.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,550 to $8,350 for Clarksville, TN is attached.
A detailed PDF report of this estimate, $9
The report lays out the aluminum fence numbers for Clarksville, TN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Clarksville: your questions
+How much does it cost to install an aluminum fence in Clarksville?
For 150 linear ft, expect $3,450 to $10,400 in the Clarksville area. A standard-spec job lands at $5,550 to $8,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Clarksville?
About $22.50 to $69 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Clarksville or Nashville?
Nashville is 65 miles away. The midpoint for 150 linear ft there is $7,300, which is 5% more than Clarksville ($6,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Clarksville?
About 31% at the midpoint, or $2,150 out of $6,950. Materials are 68% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Clarksville?
$3,450 to $10,400. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Clarksville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Clarksville area (our national range of $40 to $150 scaled by the local price level).
+Is Clarksville expensive for aluminum fence compared with the rest of Tennessee?
Clarksville is 3% below the Tennessee statewide estimate ($7,150 at the midpoint). We cover 8 metros in Tennessee; see the state page to compare them.
+What do carpenters earn in Clarksville?
The BLS median is $23.60 an hour in the Clarksville area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.48 to $28.68.
+What do basic and premium aluminum fence work cost in Clarksville?
For 150 linear ft, basic work runs $3,450 to $6,250 and premium work $7,650 to $10,400. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Clarksville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. January and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Clarksville?
$180 to $800, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Clarksville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.