Chain-link fence cost in Clarksville, TN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,400 – $5,500
- Per linear ft
- $9.20 – $35.50
- before permit
- Versus US midpoint
- −10%
- US $3,850
- Rank of 300 metros
- #236
- 1 = most expensive
If you want to install a chain-link fence in Clarksville, plan on $1,400 to $5,500 for 150 linear ft, all in. Per linear ft, that is $9.20 to $35.50 for materials and labor, with the permit on top. The local midpoint runs 10% lower than the national one. Construction laborers earn a median of $20.17 an hour in the Clarksville area, 11% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Clarksville, TN, standard level
$2,650 to $4,250
About $17 to $27.50 per linear ft before permits. Labor is about 58% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,400 | $2,600 |
| Permits and fees | $65 | $110 |
| Total | $2,650 | $4,250 |
Cost breakdown for 150 linear ft in Clarksville, TN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $870 | $1,350 | $1,900 | 40% |
| Labor | $510 | $2,000 | $3,500 | 58% |
| Permits and fees | $35 | $85 | $140 | 3% |
| Total | $1,400 | $3,450 | $5,500 | 100% |
Where the Clarksville price comes from
We price the labor side from BLS wage data for 2 trades: construction laborers at 60%, carpenters at 40%. Weighted together, Clarksville wages are 0.86 times the national level. Labor makes up about 58% of the midpoint estimate (60% at national prices).
On the materials line, the BEA goods price index for the Clarksville metro is 96.2 (US = 100). The midpoint materials bill for 150 linear ft comes to $1,350, compared with $1,450 at national prices. Permit and inspection fees are scaled by the broader index (90.9) and land at $35 to $140.
Specs and site conditions that change a Clarksville bid
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Climate in Clarksville: timing your chain-link fence job
We use NOAA's 1991-2020 climate normals for Clarksville Wwtp (in the city). These are 30-year monthly averages, not forecasts.
September through June is the stretch where exterior installation runs into the fewest weather problems in Clarksville (10 of 12 months). July and August have an average daytime high of 90°F or more.
Clarksville gets about 54 inches of precipitation in a normal year. The wettest months are April, May and December (5.6 inches in May). Inside the workable window, January and September are the driest, at 4.0 and 3.4 inches. The station averages about 57 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 47 | 28 | 4.0 | Workable |
| Feb | 52 | 31 | 4.5 | Workable |
| Mar | 61 | 38 | 4.8 | Workable |
| Apr | 72 | 47 | 5.0 | Workable |
| May | 79 | 57 | 5.6 | Workable |
| Jun | 87 | 65 | 4.7 | Workable |
| Jul | 90 | 69 | 4.6 | Hot |
| Aug | 90 | 67 | 3.7 | Hot |
| Sep | 84 | 60 | 3.4 | Workable |
| Oct | 72 | 48 | 4.3 | Workable |
| Nov | 60 | 37 | 4.1 | Workable |
| Dec | 50 | 31 | 4.9 | Workable |
What nearby projects cost in Clarksville
Because every project leans on different trades, Clarksville's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −6% and wood fence −9%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,750 – $7,000 | −9% |
| Vinyl fence | 150 linear ft | $4,300 – $8,550 | −6% |
| Aluminum fence | 150 linear ft | $3,450 – $10,400 | −9% |
| Gravel driveway | 1,000 sq ft | $2,300 – $9,350 | −8% |
Extras that change the Clarksville total
Extras are quoted nationally and then scaled to Clarksville by the average of the local wage index (0.86) and goods index (0.96), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $75 – $910 |
Clarksville labor market for chain-link fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Clarksville is 0.86 times the national level.
Construction laborers (47-2061), 60% of the weighting: a median of $20.17 an hour, 11% below the US median of $22.66. The middle half of them earn between $17.68 and $23.18 an hour. About 620 work in the metro. That is 60.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
For carpenters (47-2031, weighted 40%) the local median is $23.60 an hour, which is 19% below the national $29.12. The middle half of them earn between $21.48 and $28.68 an hour. BLS counts 290 of them working in the area, 28.1 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($23.18 an hour) instead of the median, the labor line grows by about $190. At the 25th percentile ($17.68) it shrinks by about $150. The total moves by 5.4% or 4.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 103,220 jobs in the Clarksville area. That makes it the 200th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $17.68 | $20.17 | $23.18 | $22.66 | 0.89 | metro |
| Carpenters (47-2031) | 40% | $21.48 | $23.60 | $28.68 | $29.12 | 0.81 | metro |
| Blended | 100% | 0.86 | |||||
Is Clarksville cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $3,300 to $4,000 across Clarksville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Clarksville, TNthis page | $1,400 – $5,500 | $3,450 | |
| Nashville, TN65 miles | $1,500 – $5,900 | $3,700 | +7% |
| Bowling Green, KY70 miles | $1,450 – $5,600 | $3,500 | +2% |
| Evansville, IN95 miles | $1,550 – $6,450 | $4,000 | +16% |
| Jackson, TN95 miles | $1,450 – $5,600 | $3,500 | +2% |
| Huntsville, AL140 miles | $1,400 – $5,250 | $3,300 | −4% |
| Tennessee (statewide) | $1,450 – $5,700 | $3,550 | +3% |
| United States | $1,550 – $6,150 | $3,850 | +11% |
Across 300 US metros, Clarksville comes in at #236 from the top. The priciest is Honolulu, HI at $5,450; the cheapest is Brownsville, TX at $3,000 (midpoints, 150 linear ft). Statewide, Clarksville is 3% below the Tennessee figure.
Other Tennessee metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Nashville, TN | 1,099,300 jobs | $1,500 – $5,900 | $3,700 | +7% |
| Memphis, TN | 611,670 jobs | $1,450 – $5,700 | $3,550 | +3% |
| Knoxville, TN | 424,600 jobs | $1,450 – $5,750 | $3,600 | +4% |
| Chattanooga, TN | 268,750 jobs | $1,450 – $5,600 | $3,500 | +2% |
| Kingsport, TN | 119,560 jobs | $1,450 – $5,650 | $3,550 | +2% |
| Jackson, TN | 84,530 jobs | $1,450 – $5,600 | $3,500 | +2% |
Cities with a workforce like Clarksville's
Big cities and small ones price differently, so here is Clarksville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charleston, WV | 103,450 jobs | $1,450 – $5,800 | $3,600 | +5% |
| Lafayette, IN | 102,200 jobs | $1,500 – $6,250 | $3,900 | +12% |
| Gainesville, GA | 103,870 jobs | $1,400 – $5,250 | $3,300 | −4% |
| Lake Charles, LA | 101,690 jobs | $1,400 – $5,500 | $3,450 | level |
Clarksville: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Clarksville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$1,400 to $3,050
4-ft galvanized, front yard
Standard
$2,650 to $4,250
6-ft galvanized backyard fence
Premium
$3,850 to $5,500
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $960 – $2,050 | $1,800 – $2,900 | $2,600 – $3,700 |
| 150 ft (150 linear ft) | $1,400 – $3,050 | $2,650 – $4,250 | $3,850 – $5,500 |
| 200 ft (200 linear ft) | $1,900 – $4,050 | $3,500 – $5,650 | $5,100 – $7,250 |
| full lot (300 linear ft) | $2,800 – $6,000 | $5,200 – $8,450 | $7,600 – $10,800 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,650 to $4,250 for Clarksville, TN is attached.
A detailed PDF report of this estimate, $9
The report lays out the chain-link fence numbers for Clarksville, TN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Clarksville: your questions
+How much does it cost to install a chain-link fence in Clarksville?
For 150 linear ft, expect $1,400 to $5,500 in the Clarksville area. A standard-spec job lands at $2,650 to $4,250. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Clarksville?
About $9.20 to $35.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Clarksville or Nashville?
Nashville is 65 miles away. The midpoint for 150 linear ft there is $3,700, which is 7% more than Clarksville ($3,450). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Clarksville?
About 58% at the midpoint, or $2,000 out of $3,450. Materials are 40% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Clarksville?
$1,900 to $7,250. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Clarksville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Clarksville area (our national range of $40 to $150 scaled by the local price level).
+Is Clarksville expensive for chain-link fence compared with the rest of Tennessee?
Clarksville is 3% below the Tennessee statewide estimate ($3,550 at the midpoint). We cover 8 metros in Tennessee; see the state page to compare them.
+What do construction laborers earn in Clarksville?
The BLS median is $20.17 an hour in the Clarksville area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.68 to $23.18.
+What do basic and premium chain-link fence work cost in Clarksville?
For 150 linear ft, basic work runs $1,400 to $3,050 and premium work $3,850 to $5,500. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Clarksville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. January and September are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Clarksville?
$75 to $910, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Clarksville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).