Vinyl siding cost in Beaumont, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,900 – $23,700
- Per sq ft of wall
- $3.75 – $11.50
- before permit
- Versus US midpoint
- −6%
- US $16,800
- Rank of 300 metros
- #167
- 1 = most expensive
If you want to install vinyl siding in Beaumont, plan on $7,900 to $23,700 for 2,100 sq ft of wall, all in. Per sq ft of wall, that is $3.75 to $11.50 for materials and labor, with the permit on top. The local midpoint runs 6% lower than the national one. Building materials run about 6% below the US average here (BEA goods price index 93.8).
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Beaumont, TX, standard level
$12,700 to $19,000
About $6.05 to $9.05 per sq ft of wall before permits. Labor is about 50% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,300 | $9,450 |
| Labor | $6,350 | $9,550 |
| Permits and fees | $0 | $0 |
| Total | $12,700 | $19,000 |
Cost breakdown for 2,100 sq ft of wall in Beaumont, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $7,900 | $11,800 | 50% |
| Labor | $4,000 | $7,950 | $11,900 | 50% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,900 | $15,800 | $23,700 | 100% |
Why Beaumont prices look the way they do
Labor is 50% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Beaumont the blended ratio comes out at 0.95.
On the materials line, the BEA goods price index for the Beaumont metro is 93.8 (US = 100). The midpoint materials bill for 2,100 sq ft of wall comes to $7,900, compared with $8,400 at national prices. Permit and inspection fees are scaled by the broader index (90.0) and land at $0 to $0.
Data note: 10% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Beaumont. The wage table below marks each row.
Climate in Beaumont: timing your vinyl siding job
We use NOAA's 1991-2020 climate normals for Beaumont City (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Beaumont (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Beaumont gets about 65 inches of precipitation in a normal year. The wettest months are June, August and September (7.4 inches in September). Inside the workable window, February and March are the driest, at 3.7 and 3.7 inches. The station averages about 95 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 63 | 43 | 5.4 | Workable |
| Feb | 66 | 47 | 3.7 | Workable |
| Mar | 72 | 54 | 3.7 | Workable |
| Apr | 78 | 59 | 3.9 | Workable |
| May | 85 | 68 | 5.2 | Workable |
| Jun | 90 | 74 | 7.0 | Hot |
| Jul | 92 | 76 | 6.5 | Hot |
| Aug | 93 | 75 | 7.2 | Hot |
| Sep | 89 | 70 | 7.4 | Workable |
| Oct | 82 | 61 | 5.4 | Workable |
| Nov | 71 | 51 | 4.4 | Workable |
| Dec | 64 | 45 | 5.3 | Workable |
Specs and site conditions that change a Beaumont bid
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Pick a size, pick a tier: vinyl siding pricing in Beaumont
Three bands are cut from the same cited range and localized for Beaumont wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$7,900 to $14,200
Basic clapboard siding, simple house
Standard
$12,700 to $19,000
Mid-grade panels, standard trim and corners
Premium
$17,400 to $23,700
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,500 – $8,150 | $7,250 – $10,900 | $9,950 – $13,600 |
| average house (2,100 sq ft of wall) | $7,900 – $14,200 | $12,700 – $19,000 | $17,400 – $23,700 |
| large house (3,000 sq ft of wall) | $11,300 – $20,400 | $18,100 – $27,100 | $24,900 – $33,900 |
How Beaumont compares
Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Beaumont is the priciest of the group. Alexandria is the cheapest at $14,400.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Beaumont, TXthis page | $7,900 – $23,700 | $15,800 | |
| Lake Charles, LA60 miles | $7,450 – $22,300 | $14,900 | −6% |
| Houston, TX70 miles | $7,750 – $23,300 | $15,500 | −2% |
| Lafayette, LA125 miles | $7,300 – $21,900 | $14,600 | −8% |
| Alexandria, LA130 miles | $7,200 – $21,600 | $14,400 | −9% |
| College Station, TX145 miles | $7,250 – $21,800 | $14,500 | −8% |
| Texas (statewide) | $7,600 – $22,800 | $15,200 | −4% |
| United States | $8,400 – $25,200 | $16,800 | +6% |
Across 300 US metros, Beaumont comes in at #167 from the top. The priciest is Honolulu, HI at $22,700; the cheapest is Brownsville, TX at $13,500 (midpoints, 2,100 sq ft of wall). Statewide, Beaumont is 4% above the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $7,900 – $23,700 | $15,800 | level |
| Houston, TX | 3,289,720 jobs | $7,750 – $23,300 | $15,500 | −2% |
| Austin, TX | 1,293,690 jobs | $7,650 – $22,900 | $15,300 | −4% |
| San Antonio, TX | 1,126,880 jobs | $7,400 – $22,200 | $14,800 | −6% |
| El Paso, TX | 339,120 jobs | $7,000 – $21,000 | $14,000 | −12% |
| McAllen, TX | 296,700 jobs | $6,900 – $20,700 | $13,800 | −13% |
Cities with a workforce like Beaumont's
Big cities and small ones price differently, so here is Beaumont against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Spartanburg, SC | 165,150 jobs | $7,750 – $23,200 | $15,500 | −2% |
| Canton, OH | 163,080 jobs | $8,250 – $24,700 | $16,500 | +4% |
| Montgomery, AL | 165,550 jobs | $7,350 – $22,000 | $14,700 | −7% |
| Shreveport, LA | 162,750 jobs | $7,300 – $21,900 | $14,600 | −8% |
Beaumont labor market for vinyl siding
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Beaumont is 0.95 times the national level.
For carpenters (47-2031, weighted 60%) the local median is $28.02 an hour, which is 4% below the national $29.12. The middle half of them earn between $22.76 and $30.06 an hour. BLS counts 1,000 of them working in the area, 61.3 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $21.27 an hour, 6% below the US median of $22.66. The middle half of them earn between $17.64 and $28.00 an hour. About 3,340 work in the metro. That is 204.6 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
Sheet metal workers (47-2211) carry 10% of the labor weighting. BLS does not publish this trade for the Beaumont metro, so we used the Texas statewide median: $26.08 an hour against $29.71 for the US. The middle half of them earn between $21.61 and $30.51 an hour.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($30.06 an hour) instead of the median, the labor line grows by about $350. At the 25th percentile ($22.76) it shrinks by about $910. The total moves by 2.2% or 5.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 163,220 jobs in the Beaumont-Port Arthur area. That makes it the 144th largest of the 300 metros we cover, with 0.10% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $22.76 | $28.02 | $30.06 | $29.12 | 0.96 | metro |
| Construction laborers (47-2061) | 30% | $17.64 | $21.27 | $28.00 | $22.66 | 0.94 | metro |
| Sheet metal workers (47-2211) | 10% | $21.61 | $26.08 | $30.51 | $29.71 | 0.88 | state |
| Blended | 100% | 0.95 | |||||
Planning more than one job in Beaumont?
Because every project leans on different trades, Beaumont's wage level does not move all prices equally. Against the US midpoint, attic insulation runs −5% and roof replacement −12%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,300 – $11,100 | −12% |
| Gutters | 160 linear ft | $1,150 – $3,850 | −8% |
| Window replacement | 10 windows | $4,150 – $13,900 | −7% |
| Attic insulation | 1,000 sq ft | $950 – $3,800 | −5% |
| Metal roof | 2,000 sq ft of roof | $8,800 – $29,100 | −11% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,700 to $19,000 for Beaumont, TX is attached.
Detailed vinyl siding report for Beaumont, TX, $9
Multi-page report for Beaumont, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Beaumont: your questions
+How much does it cost to install vinyl siding in Beaumont?
For 2,100 sq ft of wall, expect $7,900 to $23,700 in the Beaumont area. A standard-spec job lands at $12,700 to $19,000. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Beaumont?
About $3.75 to $11.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Beaumont or Lake Charles?
Lake Charles is 60 miles away. The midpoint for 2,100 sq ft of wall there is $14,900, which is 6% less than Beaumont ($15,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Beaumont?
About 50% at the midpoint, or $7,950 out of $15,800. Materials are 50% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Beaumont?
$7,900 to $23,700. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Beaumont?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Beaumont area (our national range of $0 to $0 scaled by the local price level).
+Is Beaumont expensive for vinyl siding compared with the rest of Texas?
Beaumont is 4% above the Texas statewide estimate ($15,200 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do carpenters earn in Beaumont?
The BLS median is $28.02 an hour in the Beaumont area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.76 to $30.06.
+What do basic and premium vinyl siding work cost in Beaumont?
For 2,100 sq ft of wall, basic work runs $7,900 to $14,200 and premium work $17,400 to $23,700. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Beaumont?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and March are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Beaumont
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.