Vinyl siding cost in Montgomery, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $7,350 – $22,000
- Per sq ft of wall
- $3.50 – $10.50
- before permit
- Versus US midpoint
- −13%
- US $16,800
- Rank of 300 metros
- #264
- 1 = most expensive
Local price for new vinyl siding in the Montgomery area: $7,350 to $22,000 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 13% lower than the US figure. Carpenters earn a median of $22.77 an hour in the Montgomery area, 22% below the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Montgomery, AL, standard level
$11,800 to $17,600
About $5.60 to $8.40 per sq ft of wall before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,500 | $9,700 |
| Labor | $5,300 | $7,900 |
| Permits and fees | $0 | $0 |
| Total | $11,800 | $17,600 |
Cost breakdown for 2,100 sq ft of wall in Montgomery, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,050 | $8,100 | $12,100 | 55% |
| Labor | $3,300 | $6,600 | $9,900 | 45% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $7,350 | $14,700 | $22,000 | 100% |
What is behind the Montgomery number
Labor is 45% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Montgomery the blended ratio comes out at 0.79.
Materials are scaled with BEA's regional price parity for goods. Montgomery is at 96.4 against 100 for the US, so a materials line of $8,400 nationally becomes $8,100 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 89.7: $0 to $0.
What nearby projects cost in Montgomery
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Montgomery wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−4%) and roof replacement lowest (−13%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,250 – $11,000 | −13% |
| Gutters | 160 linear ft | $1,150 – $3,800 | −10% |
| Window replacement | 10 windows | $4,050 – $13,800 | −8% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
| Metal roof | 2,000 sq ft of roof | $8,650 – $29,000 | −12% |
Is Montgomery cheap or dear? The local comparison
Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Birmingham is the priciest of the group at $15,000. Dothan is the cheapest at $14,000.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Montgomery, ALthis page | $7,350 – $22,000 | $14,700 | |
| Auburn, AL50 miles | $7,300 – $22,000 | $14,600 | level |
| Birmingham, AL80 miles | $7,500 – $22,500 | $15,000 | +2% |
| Columbus, GA90 miles | $7,200 – $21,600 | $14,400 | −2% |
| Dothan, AL95 miles | $7,000 – $21,000 | $14,000 | −5% |
| Tuscaloosa, AL95 miles | $7,400 – $22,100 | $14,800 | +1% |
| Alabama (statewide) | $7,350 – $22,100 | $14,700 | level |
| United States | $8,400 – $25,200 | $16,800 | +14% |
Out of the 300 metros we cover, Montgomery ranks #264 for the cost of this job (#1 is the most expensive). Statewide, Montgomery is 0% below the Alabama figure.
Elsewhere in Alabama
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $7,500 – $22,500 | $15,000 | +2% |
| Huntsville, AL | 266,650 jobs | $7,450 – $22,300 | $14,900 | +1% |
| Mobile, AL | 172,550 jobs | $7,400 – $22,100 | $14,800 | level |
| Tuscaloosa, AL | 108,460 jobs | $7,400 – $22,100 | $14,800 | +1% |
| Daphne, AL | 87,120 jobs | $7,350 – $22,100 | $14,700 | level |
| Auburn, AL | 72,710 jobs | $7,300 – $22,000 | $14,600 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Montgomery against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Peoria, IL | 166,020 jobs | $9,350 – $28,000 | $18,700 | +27% |
| Spartanburg, SC | 165,150 jobs | $7,750 – $23,200 | $15,500 | +5% |
| Lubbock, TX | 166,780 jobs | $7,050 – $21,100 | $14,100 | −4% |
| Beaumont, TX | 163,220 jobs | $7,900 – $23,700 | $15,800 | +8% |
The best months for vinyl siding in Montgomery
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Montgomery Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Montgomery are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Montgomery gets about 51 inches of precipitation in a normal year. The wettest months are March, July and December (5.2 inches in March). Inside the workable window, September and October are the driest, at 3.7 and 2.9 inches. The station averages about 93 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 60 | 37 | 4.6 | Workable |
| Feb | 65 | 40 | 4.9 | Workable |
| Mar | 72 | 47 | 5.2 | Workable |
| Apr | 79 | 53 | 4.0 | Workable |
| May | 86 | 61 | 3.9 | Workable |
| Jun | 92 | 69 | 4.1 | Hot |
| Jul | 94 | 72 | 5.1 | Hot |
| Aug | 94 | 71 | 4.0 | Hot |
| Sep | 89 | 66 | 3.7 | Workable |
| Oct | 80 | 55 | 2.9 | Workable |
| Nov | 70 | 43 | 3.9 | Workable |
| Dec | 62 | 39 | 5.0 | Workable |
Montgomery: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Montgomery. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$7,350 to $13,200
Basic clapboard siding, simple house
Standard
$11,800 to $17,600
Mid-grade panels, standard trim and corners
Premium
$16,200 to $22,000
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,200 – $7,550 | $6,700 – $10,100 | $9,250 – $12,600 |
| average house (2,100 sq ft of wall) | $7,350 – $13,200 | $11,800 – $17,600 | $16,200 – $22,000 |
| large house (3,000 sq ft of wall) | $10,500 – $18,900 | $16,800 – $25,200 | $23,100 – $31,500 |
Vinyl siding: what moves the price in Montgomery
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Who does the work: Montgomery trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Montgomery the blend is 0.79.
Carpenters (47-2031), 60% of the weighting: a median of $22.77 an hour, 22% below the US median of $29.12. The middle half of them earn between $17.72 and $26.19 an hour. About 300 work in the metro. That is 18.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $17.61 an hour, which is 22% below the national $22.66. The middle half of them earn between $14.10 and $21.41 an hour. BLS counts 1,040 of them working in the area, 62.8 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $24.63 an hour, 17% below the US median of $29.71. The middle half of them earn between $21.11 and $32.68 an hour. About 80 work in the metro. That is 4.8 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $590 to the midpoint estimate; the 25th percentile takes off about $870. That is a swing of roughly 5.9% to 4.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Montgomery has 165,550 jobs in total (BLS, May 2025), ranking 142nd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $17.72 | $22.77 | $26.19 | $29.12 | 0.78 | metro |
| Construction laborers (47-2061) | 30% | $14.10 | $17.61 | $21.41 | $22.66 | 0.78 | metro |
| Sheet metal workers (47-2211) | 10% | $21.11 | $24.63 | $32.68 | $29.71 | 0.83 | metro |
| Blended | 100% | 0.79 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $11,800 to $17,600 for Montgomery, AL is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Montgomery, AL: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Montgomery: your questions
+How much does it cost to install vinyl siding in Montgomery?
For 2,100 sq ft of wall, expect $7,350 to $22,000 in the Montgomery area. A standard-spec job lands at $11,800 to $17,600. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Montgomery?
About $3.50 to $10.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Montgomery or Auburn?
Auburn is 50 miles away. The midpoint for 2,100 sq ft of wall there is $14,600, which is 0% less than Montgomery ($14,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Montgomery?
About 45% at the midpoint, or $6,600 out of $14,700. Materials are 55% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Montgomery?
$7,350 to $22,000. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Montgomery?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Montgomery area (our national range of $0 to $0 scaled by the local price level).
+Is Montgomery expensive for vinyl siding compared with the rest of Alabama?
Montgomery is 0% below the Alabama statewide estimate ($14,700 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do carpenters earn in Montgomery?
The BLS median is $22.77 an hour in the Montgomery area, compared with $29.12 nationally. The 25th to 75th percentile range is $17.72 to $26.19.
+What do basic and premium vinyl siding work cost in Montgomery?
For 2,100 sq ft of wall, basic work runs $7,350 to $13,200 and premium work $16,200 to $22,000. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Montgomery?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Montgomery
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.