Vinyl siding cost in Eugene, OR
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,700 – $26,200
- Per sq ft of wall
- $4.15 – $12.50
- before permit
- Versus US midpoint
- +4%
- US $16,800
- Rank of 300 metros
- #65
- 1 = most expensive
Local price for new vinyl siding in the Eugene area: $8,700 to $26,200 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% higher than the US figure. Building materials run about 5% above the US average here (BEA goods price index 105.3).
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Eugene, OR, standard level
$14,000 to $20,900
About $6.65 to $9.95 per sq ft of wall before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $7,050 | $10,600 |
| Labor | $6,900 | $10,300 |
| Permits and fees | $0 | $0 |
| Total | $14,000 | $20,900 |
Cost breakdown for 2,100 sq ft of wall in Eugene, OR
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,400 | $8,850 | $13,300 | 51% |
| Labor | $4,300 | $8,600 | $12,900 | 49% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,700 | $17,400 | $26,200 | 100% |
Where the Eugene price comes from
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Eugene wages are 1.02 times the national level. Labor makes up about 49% of the midpoint estimate (50% at national prices).
Materials are scaled with BEA's regional price parity for goods. Eugene is at 105.3 against 100 for the US, so a materials line of $8,400 nationally becomes $8,850 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 101.6: $0 to $0.
Who does the work: Eugene trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Eugene the blend is 1.02.
Carpenters (47-2031), 60% of the weighting: a median of $30.09 an hour, 3% above the US median of $29.12. The middle half of them earn between $24.10 and $35.05 an hour. About 710 work in the metro. That is 45.0 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $22.85 an hour, which is in line with the national $22.66. The middle half of them earn between $20.21 and $27.39 an hour. BLS counts 1,010 of them working in the area, 64.0 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $30.13 an hour, in line with the US median of $29.71. The middle half of them earn between $22.76 and $46.39 an hour. About 240 work in the metro. That is 15.2 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $860 to the midpoint estimate; the 25th percentile takes off about $1,050. That is a swing of roughly 5.9% to 4.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Eugene-Springfield has 157,710 jobs in total (BLS, May 2025), ranking 150th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $24.10 | $30.09 | $35.05 | $29.12 | 1.03 | metro |
| Construction laborers (47-2061) | 30% | $20.21 | $22.85 | $27.39 | $22.66 | 1.01 | metro |
| Sheet metal workers (47-2211) | 10% | $22.76 | $30.13 | $46.39 | $29.71 | 1.01 | metro |
| Blended | 100% | 1.02 | |||||
Cost by quality level and size in Eugene
The cited range is split into basic, standard and premium bands, then scaled to Eugene. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,700 to $15,700
Basic clapboard siding, simple house
Standard
$14,000 to $20,900
Mid-grade panels, standard trim and corners
Premium
$19,200 to $26,200
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $5,000 – $8,950 | $7,950 – $12,000 | $11,000 – $15,000 |
| average house (2,100 sq ft of wall) | $8,700 – $15,700 | $14,000 – $20,900 | $19,200 – $26,200 |
| large house (3,000 sq ft of wall) | $12,500 – $22,400 | $19,900 – $29,900 | $27,400 – $37,400 |
Planning more than one job in Eugene?
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Eugene wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+10%) and roof replacement lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,700 – $12,000 | −5% |
| Gutters | 160 linear ft | $1,300 – $4,300 | +2% |
| Window replacement | 10 windows | $4,850 – $16,100 | +7% |
| Attic insulation | 1,000 sq ft | $1,100 – $4,400 | +10% |
| Metal roof | 2,000 sq ft of roof | $9,500 – $31,900 | −3% |
Why two Eugene quotes can differ
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
How Eugene compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 2,100 sq ft of wall range from $17,100 to $19,000 across Eugene and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Eugene, ORthis page | $8,700 – $26,200 | $17,400 | |
| Salem, OR65 miles | $8,800 – $26,300 | $17,600 | +1% |
| Bend, OR100 miles | $8,850 – $26,500 | $17,700 | +1% |
| Medford, OR105 miles | $8,550 – $25,600 | $17,100 | −2% |
| Portland, OR115 miles | $9,500 – $28,400 | $19,000 | +9% |
| Yakima, WA205 miles | $8,900 – $26,600 | $17,800 | +2% |
| Oregon (statewide) | $8,900 – $26,700 | $17,800 | +2% |
| United States | $8,400 – $25,200 | $16,800 | −4% |
Out of the 300 metros we cover, Eugene ranks #65 for the cost of this job (#1 is the most expensive). Statewide, Eugene is 2% below the Oregon figure.
Elsewhere in Oregon
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Portland, OR | 1,208,410 jobs | $9,500 – $28,400 | $19,000 | +9% |
| Salem, OR | 188,620 jobs | $8,800 – $26,300 | $17,600 | +1% |
| Bend, OR | 108,240 jobs | $8,850 – $26,500 | $17,700 | +1% |
| Medford, OR | 89,060 jobs | $8,550 – $25,600 | $17,100 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Eugene against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Gulfport, MS | 158,310 jobs | $7,550 – $22,700 | $15,100 | −13% |
| Brownsville, TX | 157,450 jobs | $6,750 – $20,200 | $13,500 | −23% |
| Youngstown, OH | 160,160 jobs | $8,050 – $24,100 | $16,100 | −8% |
| Hickory, NC | 154,090 jobs | $7,550 – $22,700 | $15,100 | −13% |
The best months for vinyl siding in Eugene
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Eugene Mahlon Sweet Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
Weather is not a serious constraint for exterior installation in Eugene: no month in the averages is cold enough (an average daytime high under 45°F) or hot enough (an average daytime high of 90°F or more) to rule it out, so the workable window is all year.
Eugene gets about 41 inches of precipitation in a normal year. The wettest months are January, November and December (7.2 inches in December). The station averages about 18 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 48 | 35 | 6.0 | Workable |
| Feb | 52 | 35 | 4.7 | Workable |
| Mar | 57 | 37 | 4.6 | Workable |
| Apr | 61 | 40 | 3.3 | Workable |
| May | 68 | 44 | 2.5 | Workable |
| Jun | 74 | 48 | 1.2 | Workable |
| Jul | 84 | 52 | 0.3 | Workable |
| Aug | 84 | 52 | 0.4 | Workable |
| Sep | 78 | 48 | 1.4 | Workable |
| Oct | 65 | 42 | 3.2 | Workable |
| Nov | 53 | 38 | 6.0 | Workable |
| Dec | 47 | 34 | 7.2 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $14,000 to $20,900 for Eugene, OR is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Eugene, OR: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Eugene: your questions
+How much does it cost to install vinyl siding in Eugene?
For 2,100 sq ft of wall, expect $8,700 to $26,200 in the Eugene area. A standard-spec job lands at $14,000 to $20,900. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Eugene?
About $4.15 to $12.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Eugene or Salem?
Salem is 65 miles away. The midpoint for 2,100 sq ft of wall there is $17,600, which is 1% more than Eugene ($17,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Eugene?
About 49% at the midpoint, or $8,600 out of $17,400. Materials are 51% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Eugene?
$8,700 to $26,200. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Eugene?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Eugene area (our national range of $0 to $0 scaled by the local price level).
+Is Eugene expensive for vinyl siding compared with the rest of Oregon?
Eugene is 2% below the Oregon statewide estimate ($17,800 at the midpoint). We cover 5 metros in Oregon; see the state page to compare them.
+What do carpenters earn in Eugene?
The BLS median is $30.09 an hour in the Eugene area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.10 to $35.05.
+What do basic and premium vinyl siding work cost in Eugene?
For 2,100 sq ft of wall, basic work runs $8,700 to $15,700 and premium work $19,200 to $26,200. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+Is there a bad season to install vinyl siding in Eugene?
Not from a temperature point of view. NOAA's 1991-2020 normals show no month with a freezing-level overnight low or a 90°F-plus average high, so timing is mostly about contractor availability and rain.
Vinyl siding near Eugene
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.