Vinyl siding cost in Youngstown, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,050 – $24,100
- Per sq ft of wall
- $3.80 – $11.50
- before permit
- Versus US midpoint
- −4%
- US $16,800
- Rank of 300 metros
- #149
- 1 = most expensive
Local price for new vinyl siding in the Youngstown area: $8,050 to $24,100 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 4% lower than the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Youngstown, OH, standard level
$12,800 to $19,300
About $6.10 to $9.15 per sq ft of wall before permits. Labor is about 51% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,300 | $9,450 |
| Labor | $6,550 | $9,850 |
| Permits and fees | $0 | $0 |
| Total | $12,800 | $19,300 |
Cost breakdown for 2,100 sq ft of wall in Youngstown, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $7,850 | $11,800 | 49% |
| Labor | $4,100 | $8,200 | $12,300 | 51% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,050 | $16,100 | $24,100 | 100% |
Where the Youngstown price comes from
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Youngstown wages are 0.97 times the national level. Labor makes up about 51% of the midpoint estimate (50% at national prices).
Materials are scaled with BEA's regional price parity for goods. Youngstown is at 93.6 against 100 for the US, so a materials line of $8,400 nationally becomes $7,850 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 87.4: $0 to $0.
Who does the work: Youngstown trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Youngstown the blend is 0.97.
Carpenters (47-2031), 60% of the weighting: a median of $27.39 an hour, 6% below the US median of $29.12. The middle half of them earn between $21.75 and $35.03 an hour. About 460 work in the metro. That is 28.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $23.36 an hour, which is 3% above the national $22.66. The middle half of them earn between $18.83 and $31.39 an hour. BLS counts 850 of them working in the area, 53.1 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $30.11 an hour, in line with the US median of $29.71. The middle half of them earn between $23.15 and $36.93 an hour. About 180 work in the metro. That is 11.2 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,300 to the midpoint estimate; the 25th percentile takes off about $980. That is a swing of roughly 6.1% to 8.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Youngstown-Warren has 160,160 jobs in total (BLS, May 2025), ranking 148th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $21.75 | $27.39 | $35.03 | $29.12 | 0.94 | metro |
| Construction laborers (47-2061) | 30% | $18.83 | $23.36 | $31.39 | $22.66 | 1.03 | metro |
| Sheet metal workers (47-2211) | 10% | $23.15 | $30.11 | $36.93 | $29.71 | 1.01 | metro |
| Blended | 100% | 0.97 | |||||
Youngstown: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Youngstown. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,050 to $14,400
Basic clapboard siding, simple house
Standard
$12,800 to $19,300
Mid-grade panels, standard trim and corners
Premium
$17,700 to $24,100
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,600 – $8,250 | $7,350 – $11,000 | $10,100 – $13,800 |
| average house (2,100 sq ft of wall) | $8,050 – $14,400 | $12,800 – $19,300 | $17,700 – $24,100 |
| large house (3,000 sq ft of wall) | $11,500 – $20,600 | $18,300 – $27,500 | $25,200 – $34,400 |
Youngstown against nearby metros and the rest of Ohio
Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Akron is the priciest of the group at $17,100.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Youngstown, OHthis page | $8,050 – $24,100 | $16,100 | |
| Akron, OH30 miles | $8,550 – $25,700 | $17,100 | +7% |
| Canton, OH40 miles | $8,250 – $24,700 | $16,500 | +3% |
| Cleveland, OH45 miles | $8,500 – $25,500 | $17,000 | +6% |
| Pittsburgh, PA70 miles | $8,500 – $25,600 | $17,000 | +6% |
| Erie, PA75 miles | $8,300 – $24,800 | $16,600 | +3% |
| Ohio (statewide) | $8,450 – $25,400 | $16,900 | +6% |
| United States | $8,400 – $25,200 | $16,800 | +5% |
Out of the 300 metros we cover, Youngstown ranks #149 for the cost of this job (#1 is the most expensive). Statewide, Youngstown is 5% below the Ohio figure.
Elsewhere in Ohio
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $8,850 – $26,500 | $17,700 | +10% |
| Cincinnati, OH | 1,101,030 jobs | $8,400 – $25,200 | $16,800 | +5% |
| Cleveland, OH | 1,031,130 jobs | $8,500 – $25,500 | $17,000 | +6% |
| Dayton, OH | 372,660 jobs | $8,250 – $24,800 | $16,500 | +3% |
| Akron, OH | 319,560 jobs | $8,550 – $25,700 | $17,100 | +7% |
| Toledo, OH | 291,530 jobs | $8,400 – $25,200 | $16,800 | +5% |
Metros of a similar size
Big cities and small ones price differently, so here is Youngstown against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Waterbury, CT | 160,710 jobs | $8,600 – $25,900 | $17,200 | +7% |
| Gulfport, MS | 158,310 jobs | $7,550 – $22,700 | $15,100 | −6% |
| Shreveport, LA | 162,750 jobs | $7,300 – $21,900 | $14,600 | −9% |
| Eugene, OR | 157,710 jobs | $8,700 – $26,200 | $17,400 | +9% |
Why two Youngstown quotes can differ
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
The best months for vinyl siding in Youngstown
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Youngstown Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Youngstown are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Youngstown gets about 41 inches of precipitation in a normal year, including roughly 68 inches of snow. The wettest months are June, July and September (4.3 inches in July). Inside the workable window, March and November are the driest, at 3.2 and 3.0 inches. The station averages about 8 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 34 | 19 | 3.0 | Cold |
| Feb | 37 | 21 | 2.5 | Cold |
| Mar | 47 | 28 | 3.2 | Workable |
| Apr | 60 | 38 | 3.8 | Workable |
| May | 71 | 48 | 3.7 | Workable |
| Jun | 79 | 56 | 3.9 | Workable |
| Jul | 83 | 60 | 4.3 | Workable |
| Aug | 81 | 59 | 3.5 | Workable |
| Sep | 74 | 52 | 3.8 | Workable |
| Oct | 62 | 42 | 3.3 | Workable |
| Nov | 50 | 33 | 3.0 | Workable |
| Dec | 39 | 26 | 3.2 | Cold |
Planning more than one job in Youngstown?
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Youngstown wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+2%) and roof replacement lowest (−10%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,500 – $11,300 | −10% |
| Gutters | 160 linear ft | $1,200 – $3,950 | −5% |
| Window replacement | 10 windows | $4,300 – $14,200 | −5% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,050 | +2% |
| Metal roof | 2,000 sq ft of roof | $9,300 – $30,000 | −8% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,800 to $19,300 for Youngstown, OH is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Youngstown, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Youngstown: your questions
+How much does it cost to install vinyl siding in Youngstown?
For 2,100 sq ft of wall, expect $8,050 to $24,100 in the Youngstown area. A standard-spec job lands at $12,800 to $19,300. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Youngstown?
About $3.80 to $11.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Youngstown or Akron?
Akron is 30 miles away. The midpoint for 2,100 sq ft of wall there is $17,100, which is 7% more than Youngstown ($16,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Youngstown?
About 51% at the midpoint, or $8,200 out of $16,100. Materials are 49% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Youngstown?
$8,050 to $24,100. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Youngstown?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Youngstown area (our national range of $0 to $0 scaled by the local price level).
+Is Youngstown expensive for vinyl siding compared with the rest of Ohio?
Youngstown is 5% below the Ohio statewide estimate ($16,900 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do carpenters earn in Youngstown?
The BLS median is $27.39 an hour in the Youngstown area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.75 to $35.03.
+What do basic and premium vinyl siding work cost in Youngstown?
For 2,100 sq ft of wall, basic work runs $8,050 to $14,400 and premium work $17,700 to $24,100. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Youngstown?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Youngstown
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.