Vinyl siding cost in Akron, OH
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,550 – $25,700
- Per sq ft of wall
- $4.10 – $12
- before permit
- Versus US midpoint
- +2%
- US $16,800
- Rank of 300 metros
- #83
- 1 = most expensive
Local price for new vinyl siding in the Akron area: $8,550 to $25,700 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $29.36 an hour in the Akron area, 1% above the US median of $29.12.
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Akron, OH, standard level
$13,700 to $20,600
About $6.55 to $9.80 per sq ft of wall before permits. Labor is about 54% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,300 | $9,450 |
| Labor | $7,400 | $11,100 |
| Permits and fees | $0 | $0 |
| Total | $13,700 | $20,600 |
Cost breakdown for 2,100 sq ft of wall in Akron, OH
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $7,850 | $11,800 | 46% |
| Labor | $4,650 | $9,250 | $13,900 | 54% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,550 | $17,100 | $25,700 | 100% |
Why Akron prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Akron wages are 1.10 times the national level. Labor makes up about 54% of the midpoint estimate (50% at national prices).
Materials are scaled with BEA's regional price parity for goods. Akron is at 93.6 against 100 for the US, so a materials line of $8,400 nationally becomes $7,850 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 93.4: $0 to $0.
Related projects, priced for Akron
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Akron wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+3%) and window replacement lowest (−4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,100 – $12,300 | −1% |
| Gutters | 160 linear ft | $1,350 – $4,250 | +2% |
| Window replacement | 10 windows | $4,350 – $14,400 | −4% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,100 | +3% |
| Metal roof | 2,000 sq ft of roof | $10,500 – $32,400 | +1% |
The best months for vinyl siding in Akron
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Akron Fulton Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Akron are March through November: 9 of 12. Outside them, January, February and December have an average daytime high under 45°F.
In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Akron gets about 33 inches of precipitation in a normal year. The wettest months are May, June and July (3.7 inches in June). Inside the workable window, March and November are the driest, at 2.5 and 2.3 inches. The station averages about 14 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 37 | 21 | 1.8 | Cold |
| Feb | 40 | 22 | 1.4 | Cold |
| Mar | 49 | 30 | 2.5 | Workable |
| Apr | 62 | 40 | 2.8 | Workable |
| May | 73 | 51 | 3.6 | Workable |
| Jun | 81 | 60 | 3.7 | Workable |
| Jul | 85 | 64 | 3.6 | Workable |
| Aug | 84 | 62 | 3.0 | Workable |
| Sep | 77 | 55 | 3.2 | Workable |
| Oct | 65 | 44 | 2.5 | Workable |
| Nov | 52 | 35 | 2.3 | Workable |
| Dec | 41 | 27 | 2.0 | Cold |
Who does the work: Akron trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Akron the blend is 1.10.
Carpenters (47-2031), 60% of the weighting: a median of $29.36 an hour, in line with the US median of $29.12. The middle half of them earn between $24.61 and $37.10 an hour. About 980 work in the metro. That is 30.7 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $28.28 an hour, which is 25% above the national $22.66. The middle half of them earn between $22.50 and $37.65 an hour. BLS counts 1,830 of them working in the area, 57.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $36.71 an hour, 24% above the US median of $29.71. The middle half of them earn between $22.25 and $37.00 an hour. About 320 work in the metro. That is 10.0 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,350 to the midpoint estimate; the 25th percentile takes off about $820. That is a swing of roughly 4.8% to 7.8% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Akron has 319,560 jobs in total (BLS, May 2025), ranking 80th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $24.61 | $29.36 | $37.10 | $29.12 | 1.01 | metro |
| Construction laborers (47-2061) | 30% | $22.50 | $28.28 | $37.65 | $22.66 | 1.25 | metro |
| Sheet metal workers (47-2211) | 10% | $22.25 | $36.71 | $37.00 | $29.71 | 1.24 | metro |
| Blended | 100% | 1.10 | |||||
Akron: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Akron. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,550 to $15,400
Basic clapboard siding, simple house
Standard
$13,700 to $20,600
Mid-grade panels, standard trim and corners
Premium
$18,800 to $25,700
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,900 – $8,800 | $7,850 – $11,700 | $10,800 – $14,700 |
| average house (2,100 sq ft of wall) | $8,550 – $15,400 | $13,700 – $20,600 | $18,800 – $25,700 |
| large house (3,000 sq ft of wall) | $12,200 – $22,000 | $19,600 – $29,400 | $26,900 – $36,700 |
Is Akron cheap or dear? The local comparison
Same job, same size (2,100 sq ft of wall), priced for the nearest metros. Akron is the priciest of the group. Wheeling is the cheapest at $15,700.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Akron, OHthis page | $8,550 – $25,700 | $17,100 | |
| Canton, OH30 miles | $8,250 – $24,700 | $16,500 | −4% |
| Youngstown, OH30 miles | $8,050 – $24,100 | $16,100 | −6% |
| Cleveland, OH35 miles | $8,500 – $25,500 | $17,000 | −1% |
| Wheeling, WV85 miles | $7,850 – $23,600 | $15,700 | −8% |
| Pittsburgh, PA90 miles | $8,500 – $25,600 | $17,000 | −1% |
| Ohio (statewide) | $8,450 – $25,400 | $16,900 | −1% |
| United States | $8,400 – $25,200 | $16,800 | −2% |
Out of the 300 metros we cover, Akron ranks #83 for the cost of this job (#1 is the most expensive). Statewide, Akron is 1% above the Ohio figure.
Elsewhere in Ohio
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Columbus, OH | 1,105,580 jobs | $8,850 – $26,500 | $17,700 | +3% |
| Cincinnati, OH | 1,101,030 jobs | $8,400 – $25,200 | $16,800 | −2% |
| Cleveland, OH | 1,031,130 jobs | $8,500 – $25,500 | $17,000 | −1% |
| Dayton, OH | 372,660 jobs | $8,250 – $24,800 | $16,500 | −3% |
| Toledo, OH | 291,530 jobs | $8,400 – $25,200 | $16,800 | −2% |
| Canton, OH | 163,080 jobs | $8,250 – $24,700 | $16,500 | −4% |
Metros of a similar size
Big cities and small ones price differently, so here is Akron against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Oxnard, CA | 323,890 jobs | $9,500 – $28,500 | $19,000 | +11% |
| Colorado Springs, CO | 316,060 jobs | $8,000 – $24,000 | $16,000 | −7% |
| Harrisburg, PA | 335,010 jobs | $8,400 – $25,200 | $16,800 | −2% |
| Wichita, KS | 308,570 jobs | $7,500 – $22,500 | $15,000 | −12% |
Specs and site conditions that change a Akron bid
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Labor and season
Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,700 to $20,600 for Akron, OH is attached.
Detailed vinyl siding report for Akron, OH, $9
Multi-page report for Akron, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Akron: your questions
+How much does it cost to install vinyl siding in Akron?
For 2,100 sq ft of wall, expect $8,550 to $25,700 in the Akron area. A standard-spec job lands at $13,700 to $20,600. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Akron?
About $4.10 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Akron or Canton?
Canton is 30 miles away. The midpoint for 2,100 sq ft of wall there is $16,500, which is 4% less than Akron ($17,100). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Akron?
About 54% at the midpoint, or $9,250 out of $17,100. Materials are 46% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Akron?
$8,550 to $25,700. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Akron?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Akron area (our national range of $0 to $0 scaled by the local price level).
+Is Akron expensive for vinyl siding compared with the rest of Ohio?
Akron is 1% above the Ohio statewide estimate ($16,900 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.
+What do carpenters earn in Akron?
The BLS median is $29.36 an hour in the Akron area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.61 to $37.10.
+What do basic and premium vinyl siding work cost in Akron?
For 2,100 sq ft of wall, basic work runs $8,550 to $15,400 and premium work $18,800 to $25,700. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Akron?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Akron
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.