Vinyl siding cost in Bend, OR

The best months for vinyl siding in Bend

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Bend (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Bend are February through November: 10 of 12. Outside them, January and December have an average daytime high under 45°F.

In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Bend gets about 11 inches of precipitation in a normal year, including roughly 22 inches of snow. The wettest months are January, November and December (2.1 inches in December). Inside the workable window, August and September are the driest, at 0.3 and 0.3 inches. The station averages about 16 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Who does the work: Bend trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Bend the blend is 1.05.

Carpenters (47-2031), 60% of the weighting: a median of $29.64 an hour, in line with the US median of $29.12. The middle half of them earn between $23.71 and $35.99 an hour. About 1,180 work in the metro. That is 109.0 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $25.37 an hour, which is 12% above the national $22.66. The middle half of them earn between $22.68 and $29.52 an hour. BLS counts 780 of them working in the area, 72.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Sheet metal workers (47-2211), 10% of the weighting: a median of $30.44 an hour, in line with the US median of $29.71. The middle half of them earn between $27.66 and $36.96 an hour. About 150 work in the metro. That is 13.9 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,100 to the midpoint estimate; the 25th percentile takes off about $1,050. That is a swing of roughly 5.8% to 6.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Bend has 108,240 jobs in total (BLS, May 2025), ranking 193rd by size among the 300 metros on this site.

How Bend compares

Of the five closest metros, 3 are cheaper than Bend. Medford is the lowest at about $17,100 (midpoint, 2,100 sq ft of wall), 150 miles away.

Out of the 300 metros we cover, Bend ranks #60 for the cost of this job (#1 is the most expensive). Statewide, Bend is 1% below the Oregon figure.

Elsewhere in Oregon

Metros of a similar size

Big cities and small ones price differently, so here is Bend against the 4 metros with the closest total employment.

Pick a size, pick a tier: vinyl siding pricing in Bend

The cited range is split into basic, standard and premium bands, then scaled to Bend. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).

Specs and site conditions that change a Bend bid

• Labor and season

  Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.

• Wall area is not floor area

  A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.

• Style

  Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).

Planning more than one job in Bend?

Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Bend wage and price inputs. Compared with national midpoints, attic insulation comes out highest (+11%) and window replacement lowest (+5%); the gap comes from the trades each job uses.