Vinyl siding cost in Columbia, MO
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,100 sq ft of wall)
- $8,200 – $24,500
- Per sq ft of wall
- $3.90 – $11.50
- before permit
- Versus US midpoint
- −3%
- US $16,800
- Rank of 300 metros
- #135
- 1 = most expensive
Local price for new vinyl siding in the Columbia area: $8,200 to $24,500 for 2,100 sq ft of wall. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 6% below the US average here (BEA goods price index 94.2).
Estimate your vinyl siding cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,100 sq ft of wall in Columbia, MO, standard level
$13,100 to $19,600
About $6.25 to $9.35 per sq ft of wall before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,350 | $9,500 |
| Labor | $6,750 | $10,100 |
| Permits and fees | $0 | $0 |
| Total | $13,100 | $19,600 |
Cost breakdown for 2,100 sq ft of wall in Columbia, MO
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,950 | $7,900 | $11,900 | 48% |
| Labor | $4,250 | $8,450 | $12,700 | 52% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $8,200 | $16,400 | $24,500 | 100% |
Where the Columbia price comes from
We price the labor side from BLS wage data for 3 trades: carpenters at 60%, construction laborers at 30%, sheet metal workers at 10%. Weighted together, Columbia wages are 1.01 times the national level. Labor makes up about 52% of the midpoint estimate (50% at national prices).
Materials are scaled with BEA's regional price parity for goods. Columbia is at 94.2 against 100 for the US, so a materials line of $8,400 nationally becomes $7,900 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 89.4: $0 to $0.
Planning more than one job in Columbia?
Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Columbia wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−4%) and metal roof lowest (−9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,550 – $11,400 | −9% |
| Gutters | 160 linear ft | $1,200 – $4,000 | −5% |
| Window replacement | 10 windows | $4,200 – $14,000 | −7% |
| Attic insulation | 1,000 sq ft | $970 – $3,850 | −4% |
| Metal roof | 2,000 sq ft of roof | $9,100 – $29,700 | −9% |
Who does the work: Columbia trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Columbia the blend is 1.01.
Carpenters (47-2031), 60% of the weighting: a median of $27.00 an hour, 7% below the US median of $29.12. The middle half of them earn between $21.95 and $33.85 an hour. About 510 work in the metro. That is 47.4 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $27.31 an hour, which is 21% above the national $22.66. The middle half of them earn between $21.64 and $37.38 an hour. BLS counts 470 of them working in the area, 43.6 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Sheet metal workers (47-2211), 10% of the weighting: a median of $26.23 an hour, 12% below the US median of $29.71. The middle half of them earn between $22.46 and $35.05 an hour. About 60 work in the metro. That is 5.6 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $1,200 to the midpoint estimate; the 25th percentile takes off about $870. That is a swing of roughly 5.3% to 7.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Columbia has 107,680 jobs in total (BLS, May 2025), ranking 194th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 60% | $21.95 | $27.00 | $33.85 | $29.12 | 0.93 | metro |
| Construction laborers (47-2061) | 30% | $21.64 | $27.31 | $37.38 | $22.66 | 1.21 | metro |
| Sheet metal workers (47-2211) | 10% | $22.46 | $26.23 | $35.05 | $29.71 | 0.88 | metro |
| Blended | 100% | 1.01 | |||||
The best months for vinyl siding in Columbia
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Columbia U Of M (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Columbia are February through November: 10 of 12. Outside them, January and December have an average daytime high under 45°F.
In January and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Columbia gets about 45 inches of precipitation in a normal year, including roughly 17 inches of snow. The wettest months are April, May and June (5.2 inches in May). Inside the workable window, February and November are the driest, at 2.3 and 3.0 inches. The station averages about 41 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 39 | 23 | 2.4 | Cold |
| Feb | 45 | 27 | 2.3 | Workable |
| Mar | 56 | 36 | 3.2 | Workable |
| Apr | 67 | 46 | 4.8 | Workable |
| May | 76 | 56 | 5.2 | Workable |
| Jun | 85 | 65 | 5.1 | Workable |
| Jul | 89 | 69 | 4.6 | Workable |
| Aug | 88 | 67 | 4.1 | Workable |
| Sep | 80 | 59 | 4.3 | Workable |
| Oct | 68 | 47 | 3.5 | Workable |
| Nov | 55 | 37 | 3.0 | Workable |
| Dec | 44 | 27 | 2.2 | Cold |
Cost by quality level and size in Columbia
The cited range is split into basic, standard and premium bands, then scaled to Columbia. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).
Basic
$8,200 to $14,700
Basic clapboard siding, simple house
Standard
$13,100 to $19,600
Mid-grade panels, standard trim and corners
Premium
$18,000 to $24,500
Premium or board-and-batten, many corners and gables
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (1,200 sq ft of wall) | $4,700 – $8,400 | $7,500 – $11,200 | $10,300 – $14,000 |
| average house (2,100 sq ft of wall) | $8,200 – $14,700 | $13,100 – $19,600 | $18,000 – $24,500 |
| large house (3,000 sq ft of wall) | $11,700 – $21,000 | $18,700 – $28,100 | $25,700 – $35,100 |
Specs and site conditions that change a Columbia bid
Wall area is not floor area
A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.
Style
Clapboard vinyl siding runs $4-$7 per sq ft installed; board-and-batten is $5-$9 (HomeGuide).
Old siding removal
Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.
Columbia against nearby metros and the rest of Missouri
Of the five closest metros, 1 is cheaper than Columbia. Springfield is the lowest at about $15,500 (midpoint, 2,100 sq ft of wall), 115 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Columbia, MOthis page | $8,200 – $24,500 | $16,400 | |
| Jefferson City, MO35 miles | $8,450 – $25,300 | $16,900 | +3% |
| Kansas City, MO100 miles | $8,450 – $25,300 | $16,900 | +3% |
| Springfield, MO115 miles | $7,750 – $23,200 | $15,500 | −5% |
| St. Louis, MO120 miles | $9,350 – $28,000 | $18,700 | +14% |
| Springfield, IL165 miles | $9,400 – $28,200 | $18,800 | +15% |
| Missouri (statewide) | $8,500 – $25,600 | $17,000 | +4% |
| United States | $8,400 – $25,200 | $16,800 | +3% |
Out of the 300 metros we cover, Columbia ranks #135 for the cost of this job (#1 is the most expensive). Statewide, Columbia is 4% below the Missouri figure.
Elsewhere in Missouri
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Louis, MO | 1,341,320 jobs | $9,350 – $28,000 | $18,700 | +14% |
| Kansas City, MO | 1,096,110 jobs | $8,450 – $25,300 | $16,900 | +3% |
| Springfield, MO | 223,030 jobs | $7,750 – $23,200 | $15,500 | −5% |
| Joplin, MO | 87,190 jobs | $7,600 – $22,800 | $15,200 | −7% |
| Jefferson City, MO | 80,220 jobs | $8,450 – $25,300 | $16,900 | +3% |
Metros of a similar size
Big cities and small ones price differently, so here is Columbia against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bend, OR | 108,240 jobs | $8,850 – $26,500 | $17,700 | +8% |
| Hagerstown, MD | 107,170 jobs | $7,950 – $23,900 | $15,900 | −3% |
| Tuscaloosa, AL | 108,460 jobs | $7,400 – $22,100 | $14,800 | −10% |
| Champaign, IL | 105,500 jobs | $8,950 – $26,800 | $17,900 | +9% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,100 to $19,600 for Columbia, MO is attached.
Detailed vinyl siding report for Columbia, MO, $9
Multi-page report for Columbia, MO: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl siding in Columbia: your questions
+How much does it cost to install vinyl siding in Columbia?
For 2,100 sq ft of wall, expect $8,200 to $24,500 in the Columbia area. A standard-spec job lands at $13,100 to $19,600. Small jobs usually cost more per sq ft of wall and large ones less.
+What is the price per sq ft of wall for vinyl siding in Columbia?
About $3.90 to $11.50 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.
+Is vinyl siding cheaper in Columbia or Jefferson City?
Jefferson City is 35 miles away. The midpoint for 2,100 sq ft of wall there is $16,900, which is 3% more than Columbia ($16,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Columbia?
About 52% at the midpoint, or $8,450 out of $16,400. Materials are 48% and permits 0%. Nationally, labor is 50%.
+What would average house (2,100 sq ft of wall) cost in Columbia?
$8,200 to $24,500. Pick a different size in the estimator above to get your own number.
+Does vinyl siding need a permit in Columbia?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Columbia area (our national range of $0 to $0 scaled by the local price level).
+Is Columbia expensive for vinyl siding compared with the rest of Missouri?
Columbia is 4% below the Missouri statewide estimate ($17,000 at the midpoint). We cover 6 metros in Missouri; see the state page to compare them.
+What do carpenters earn in Columbia?
The BLS median is $27.00 an hour in the Columbia area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.95 to $33.85.
+What do basic and premium vinyl siding work cost in Columbia?
For 2,100 sq ft of wall, basic work runs $8,200 to $14,700 and premium work $18,000 to $24,500. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.
+When is the best time to install vinyl siding in Columbia?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through November. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Vinyl siding near Columbia
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Vinyl Siding Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.