Skip to content
CostLocal

Vinyl siding cost in Jefferson City, MO

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (2,100 sq ft of wall)
$8,450 – $25,300
Per sq ft of wall
$4 – $12
before permit
Versus US midpoint
Level
US $16,800
Rank of 300 metros
#106
1 = most expensive

New vinyl siding in Jefferson City, MO usually costs $8,450 to $25,300 for 2,100 sq ft of wall. That works out to about $4 to $12 per sq ft of wall before permits. That is within a few percent of the national midpoint, so there is little local premium or discount. Carpenters earn a median of $27.42 an hour in the Jefferson City area, 6% below the US median of $29.12.

Estimate your vinyl siding cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade panels, standard trim and corners

Estimated cost for 2,100 sq ft of wall in Jefferson City, MO, standard level

$13,500 to $20,200

About $6.40 to $9.65 per sq ft of wall before permits. Labor is about 53% of the bill.

Cost breakdown
PartLowHigh
Materials$6,350$9,500
Labor$7,150$10,700
Permits and fees$0$0
Total$13,500$20,200
Save and get a PDF report

Cost breakdown for 2,100 sq ft of wall in Jefferson City, MO

Part of the jobLowMidpointHighShare
Materials$3,950$7,900$11,90047%
Labor$4,450$8,950$13,40053%
Permits and fees$0$0$00%
Total$8,450$16,900$25,300100%

Where the Jefferson City price comes from

Labor is 53% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is carpenters (60%), construction laborers (30%), sheet metal workers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Jefferson City the blended ratio comes out at 1.06.

Materials are scaled with BEA's regional price parity for goods. Jefferson City is at 94.2 against 100 for the US, so a materials line of $8,400 nationally becomes $7,900 here (midpoint, 2,100 sq ft of wall). Permits follow the all-items index of 88.0: $0 to $0.

Pick a size, pick a tier: vinyl siding pricing in Jefferson City

The cited range is split into basic, standard and premium bands, then scaled to Jefferson City. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (1,200 sq ft of wall) to large house (3,000 sq ft of wall).

Basic

$8,450 to $15,200

Basic clapboard siding, simple house

Standard

$13,500 to $20,200

Mid-grade panels, standard trim and corners

Premium

$18,500 to $25,300

Premium or board-and-batten, many corners and gables

Cost by size and quality level
SizeBasicStandardPremium
small house (1,200 sq ft of wall)$4,800 – $8,650$7,700 – $11,600$10,600 – $14,400
average house (2,100 sq ft of wall)$8,450 – $15,200$13,500 – $20,200$18,500 – $25,300
large house (3,000 sq ft of wall)$12,000 – $21,700$19,300 – $28,900$26,500 – $36,100

Why two Jefferson City quotes can differ

  • Old siding removal

    Taking the old siding off costs $0.70-$2.00 per sq ft. Check that disposal is included.

  • Labor and season

    Siding labor is $40-$80 an hour or $2-$6 per sq ft, and it is highest in warm months.

  • Wall area is not floor area

    A 2,000 sq ft house usually has more wall area than floor area once you count gables and two stories. Measure the wall, not the floor.

What nearby projects cost in Jefferson City

Jobs that often go together with vinyl siding are priced below at their usual sizes, using the same Jefferson City wage and price inputs. Compared with national midpoints, metal roof comes out highest (+5%) and window replacement lowest (−6%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,450 – $12,900+4%
Gutters160 linear ft$1,400 – $4,350+4%
Window replacement10 windows$4,200 – $14,000−6%
Attic insulation1,000 sq ft$1,050 – $4,050+2%
Metal roof2,000 sq ft of roof$11,100 – $33,700+5%

Is Jefferson City cheap or dear? The local comparison

Of the five closest metros, 2 are cheaper than Jefferson City. Springfield is the lowest at about $15,500 (midpoint, 2,100 sq ft of wall), 105 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Jefferson City, MOthis page$8,450 – $25,300$16,900
Columbia, MO35 miles$8,200 – $24,500$16,400−3%
St. Louis, MO95 miles$9,350 – $28,000$18,700+11%
Springfield, MO105 miles$7,750 – $23,200$15,500−8%
Kansas City, MO130 miles$8,450 – $25,300$16,900level
Springfield, IL150 miles$9,400 – $28,200$18,800+11%
Missouri (statewide)$8,500 – $25,600$17,000+1%
United States$8,400 – $25,200$16,800level

Out of the 300 metros we cover, Jefferson City ranks #106 for the cost of this job (#1 is the most expensive). Statewide, Jefferson City is 1% below the Missouri figure.

Elsewhere in Missouri

Missouri metros compared with Jefferson City
MetroSizeRangeMidpointvs. here
St. Louis, MO1,341,320 jobs$9,350 – $28,000$18,700+11%
Kansas City, MO1,096,110 jobs$8,450 – $25,300$16,900level
Springfield, MO223,030 jobs$7,750 – $23,200$15,500−8%
Columbia, MO107,680 jobs$8,200 – $24,500$16,400−3%
Joplin, MO87,190 jobs$7,600 – $22,800$15,200−10%

Metros of a similar size

Big cities and small ones price differently, so here is Jefferson City against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Greenville, NC80,770 jobs$7,500 – $22,400$15,000−11%
Las Cruces, NM80,000 jobs$7,850 – $23,500$15,700−7%
Odessa, TX80,910 jobs$7,500 – $22,500$15,000−11%
Saginaw, MI80,000 jobs$8,250 – $24,800$16,500−2%

What local crews earn in Jefferson City

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Jefferson City the blend is 1.06.

Carpenters (47-2031), 60% of the weighting: a median of $27.42 an hour, 6% below the US median of $29.12. The middle half of them earn between $22.36 and $31.22 an hour. About 430 work in the metro. That is 53.6 per 10,000 jobs, compared with 43.1 nationally, which suggests plenty of local crews to bid.

For construction laborers (47-2061, weighted 30%) the local median is $27.99 an hour, which is 24% above the national $22.66. The middle half of them earn between $21.79 and $36.61 an hour. BLS counts 580 of them working in the area, 72.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.

Sheet metal workers (47-2211), 10% of the weighting: a median of $38.22 an hour, 29% above the US median of $29.71. The middle half of them earn between $24.26 and $40.61 an hour. About 310 work in the metro. That is 38.6 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $660 to the midpoint estimate; the 25th percentile takes off about $880. That is a swing of roughly 5.2% to 3.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Jefferson City has 80,220 jobs in total (BLS, May 2025), ranking 237th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)60%$22.36$27.42$31.22$29.120.94metro
Construction laborers (47-2061)30%$21.79$27.99$36.61$22.661.24metro
Sheet metal workers (47-2211)10%$24.26$38.22$40.61$29.711.29metro
Blended100%1.06

Jefferson City weather and the vinyl siding calendar

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Jefferson City Mem Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Jefferson City are February through December: 11 of 12. Outside them, January has an average daytime high under 45°F.

In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Jefferson City gets about 40 inches of precipitation in a normal year. The wettest months are April, May and July (4.9 inches in May). Inside the workable window, February and December are the driest, at 1.9 and 2.1 inches. The station averages about 41 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Jefferson City Mem Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan41232.0Cold
Feb47261.9Workable
Mar58352.9Workable
Apr68454.4Workable
May77554.9Workable
Jun85653.6Workable
Jul89694.4Workable
Aug88663.6Workable
Sep80573.7Workable
Oct70463.4Workable
Nov57352.8Workable
Dec45262.1Workable

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $13,500 to $20,200 for Jefferson City, MO is attached.

Detailed vinyl siding report for Jefferson City, MO, $9

The report lays out the vinyl siding numbers for Jefferson City, MO line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Vinyl siding in Jefferson City: your questions

+How much does it cost to install vinyl siding in Jefferson City?

For 2,100 sq ft of wall, expect $8,450 to $25,300 in the Jefferson City area. A standard-spec job lands at $13,500 to $20,200. Small jobs usually cost more per sq ft of wall and large ones less.

+What is the price per sq ft of wall for vinyl siding in Jefferson City?

About $4 to $12 per sq ft of wall for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $4 to $12.

+Is vinyl siding cheaper in Jefferson City or Columbia?

Columbia is 35 miles away. The midpoint for 2,100 sq ft of wall there is $16,400, which is 3% less than Jefferson City ($16,900). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Jefferson City?

About 53% at the midpoint, or $8,950 out of $16,900. Materials are 47% and permits 0%. Nationally, labor is 50%.

+What would average house (2,100 sq ft of wall) cost in Jefferson City?

$8,450 to $25,300. Pick a different size in the estimator above to get your own number.

+Does vinyl siding need a permit in Jefferson City?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Jefferson City area (our national range of $0 to $0 scaled by the local price level).

+Is Jefferson City expensive for vinyl siding compared with the rest of Missouri?

Jefferson City is 1% below the Missouri statewide estimate ($17,000 at the midpoint). We cover 6 metros in Missouri; see the state page to compare them.

+What do carpenters earn in Jefferson City?

The BLS median is $27.42 an hour in the Jefferson City area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.36 to $31.22.

+What do basic and premium vinyl siding work cost in Jefferson City?

For 2,100 sq ft of wall, basic work runs $8,450 to $15,200 and premium work $18,500 to $25,300. Basic means: basic clapboard siding, simple house. Premium means: premium or board-and-batten, many corners and gables.

+When is the best time to install vinyl siding in Jefferson City?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Vinyl siding near Jefferson City

Vinyl siding: all pricesVinyl siding in MissouriAll projects in Jefferson CityMissouri cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $2-$6 per sq ft labor figure, which it says is around half the project cost.