Vinyl fence cost in Richmond, VA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,350 – $8,650
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −5%
- US $6,850
- Rank of 300 metros
- #182
- 1 = most expensive
Local price for a vinyl fence in the Richmond area: $4,350 to $8,650 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% lower than the US figure. Carpenters earn a median of $24.94 an hour in the Richmond area, 14% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Richmond, VA, standard level
$5,650 to $7,350
About $37 to $48.50 per linear ft before permits. Labor is about 20% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $1,050 | $1,600 |
| Permits and fees | $70 | $110 |
| Total | $5,650 | $7,350 |
Cost breakdown for 150 linear ft in Richmond, VA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,650 | $5,100 | $6,550 | 78% |
| Labor | $660 | $1,300 | $2,000 | 20% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,350 | $6,500 | $8,650 | 100% |
What is behind the Richmond number
The wage side of the estimate leans on carpenters, who do 50% of the hours on a typical job. Their local median is $24.94 an hour. Add the other trades involved and the blended wage index for Richmond is 0.88 (US = 1.00), which puts labor at 20% of the total.
Materials are scaled with BEA's regional price parity for goods. Richmond is at 96.8 against 100 for the US, so a materials line of $5,250 nationally becomes $5,100 here (midpoint, 150 linear ft). Permits follow the all-items index of 97.9: $40 to $150.
Related projects, priced for Richmond
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Richmond wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−7%) and chain-link fence lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,600 | −8% |
| Aluminum fence | 150 linear ft | $3,500 – $10,600 | −7% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
Who does the work: Richmond trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Richmond the blend is 0.88.
Carpenters (47-2031), 50% of the weighting: a median of $24.94 an hour, 14% below the US median of $29.12. The middle half of them earn between $22.42 and $28.84 an hour. About 3,070 work in the metro. That is 46.5 per 10,000 jobs, compared with 43.1 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 50%) the local median is $20.39 an hour, which is 10% below the national $22.66. The middle half of them earn between $18.21 and $22.61 an hour. BLS counts 4,560 of them working in the area, 69.1 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $100 to the midpoint estimate; the 25th percentile takes off about $65. That is a swing of roughly 1.0% to 1.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Richmond has 660,350 jobs in total (BLS, May 2025), ranking 45th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $22.42 | $24.94 | $28.84 | $29.12 | 0.86 | metro |
| Construction laborers (47-2061) | 50% | $18.21 | $20.39 | $22.61 | $22.66 | 0.90 | metro |
| Blended | 100% | 0.88 | |||||
Why two Richmond quotes can differ
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Is Richmond cheap or dear? The local comparison
Same job, same size (150 linear ft), priced for the nearest metros. Washington is the priciest of the group at $7,100. Lynchburg is the cheapest at $6,350.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Richmond, VAthis page | $4,350 – $8,650 | $6,500 | |
| Virginia Beach, VA70 miles | $4,300 – $8,550 | $6,400 | −1% |
| Charlottesville, VA75 miles | $4,350 – $8,800 | $6,600 | +1% |
| Lexington Park, MD80 miles | $4,550 – $9,150 | $6,850 | +5% |
| Lynchburg, VA95 miles | $4,250 – $8,500 | $6,350 | −2% |
| Washington, DC100 miles | $4,750 – $9,500 | $7,100 | +10% |
| Virginia (statewide) | $4,500 – $9,000 | $6,750 | +4% |
| United States | $4,550 – $9,150 | $6,850 | +5% |
Out of the 300 metros we cover, Richmond ranks #182 for the cost of this job (#1 is the most expensive). Statewide, Richmond is 4% below the Virginia figure.
Elsewhere in Virginia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Virginia Beach, VA | 763,060 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Roanoke, VA | 153,980 jobs | $4,250 – $8,450 | $6,350 | −2% |
| Charlottesville, VA | 114,780 jobs | $4,350 – $8,800 | $6,600 | +1% |
| Lynchburg, VA | 97,190 jobs | $4,250 – $8,500 | $6,350 | −2% |
| Blacksburg, VA | 74,070 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Winchester, VA | 67,740 jobs | $4,300 – $8,600 | $6,450 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Richmond against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Oklahoma City, OK | 677,680 jobs | $4,150 – $8,300 | $6,250 | −4% |
| Memphis, TN | 611,670 jobs | $4,300 – $8,650 | $6,500 | level |
| Louisville, KY | 685,190 jobs | $4,350 – $8,800 | $6,600 | +2% |
| Hartford, CT | 599,770 jobs | $4,550 – $9,250 | $6,900 | +6% |
Add-ons priced for Richmond
Add-ons start from national price ranges and are scaled by 0.92 for Richmond, which is the average of the area's wage index (0.88) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,750 |
The best months for vinyl fence in Richmond
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Richmond Intl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Richmond are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Richmond gets about 46 inches of precipitation in a normal year, including roughly 9 inches of snow. The wettest months are June, August and September (4.9 inches in August). Inside the workable window, February and November are the driest, at 2.6 and 3.1 inches. The station averages about 45 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 48 | 29 | 3.2 | Workable |
| Feb | 52 | 30 | 2.6 | Workable |
| Mar | 60 | 37 | 4.0 | Workable |
| Apr | 70 | 46 | 3.2 | Workable |
| May | 78 | 56 | 4.0 | Workable |
| Jun | 86 | 65 | 4.6 | Workable |
| Jul | 90 | 69 | 4.4 | Hot |
| Aug | 88 | 68 | 4.9 | Workable |
| Sep | 81 | 61 | 4.6 | Workable |
| Oct | 71 | 49 | 3.4 | Workable |
| Nov | 60 | 39 | 3.1 | Workable |
| Dec | 52 | 32 | 3.5 | Workable |
Pick a size, pick a tier: vinyl fence pricing in Richmond
The cited range is split into basic, standard and premium bands, then scaled to Richmond. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,350 to $6,050
4-ft picket or ranch rail
Standard
$5,650 to $7,350
6-ft privacy fence, standard white
Premium
$6,900 to $8,650
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,050 | $3,750 – $4,950 | $4,650 – $5,800 |
| 150 ft (150 linear ft) | $4,350 – $6,050 | $5,650 – $7,350 | $6,900 – $8,650 |
| 200 ft (200 linear ft) | $5,750 – $8,050 | $7,500 – $9,750 | $9,200 – $11,500 |
| full lot (300 linear ft) | $8,600 – $12,000 | $11,200 – $14,600 | $13,700 – $17,200 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,650 to $7,350 for Richmond, VA is attached.
Take this estimate with you: PDF report, $9
The report lays out the vinyl fence numbers for Richmond, VA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Richmond: your questions
+How much does it cost to install a vinyl fence in Richmond?
For 150 linear ft, expect $4,350 to $8,650 in the Richmond area. A standard-spec job lands at $5,650 to $7,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Richmond?
About $28.50 to $56.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Richmond or Virginia Beach?
Virginia Beach is 70 miles away. The midpoint for 150 linear ft there is $6,400, which is 1% less than Richmond ($6,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Richmond?
About 20% at the midpoint, or $1,300 out of $6,500. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Richmond?
$5,750 to $11,500. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Richmond?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Richmond area (our national range of $40 to $150 scaled by the local price level).
+Is Richmond expensive for vinyl fence compared with the rest of Virginia?
Richmond is 4% below the Virginia statewide estimate ($6,750 at the midpoint). We cover 8 metros in Virginia; see the state page to compare them.
+What do carpenters earn in Richmond?
The BLS median is $24.94 an hour in the Richmond area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.42 to $28.84.
+What do basic and premium vinyl fence work cost in Richmond?
For 150 linear ft, basic work runs $4,350 to $6,050 and premium work $6,900 to $8,650. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Richmond?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Richmond?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Richmond
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.