Vinyl fence cost in Memphis, TN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,300 – $8,650
- Per linear ft
- $28.50 – $56.50
- before permit
- Versus US midpoint
- −5%
- US $6,850
- Rank of 300 metros
- #186
- 1 = most expensive
Local price for a vinyl fence in the Memphis area: $4,300 to $8,650 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 5% lower than the US figure. Building materials run about 4% below the US average here (BEA goods price index 96.2).
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Memphis, TN, standard level
$5,600 to $7,350
About $37 to $48 per linear ft before permits. Labor is about 21% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,450 | $5,650 |
| Labor | $1,050 | $1,600 |
| Permits and fees | $65 | $110 |
| Total | $5,600 | $7,350 |
Cost breakdown for 150 linear ft in Memphis, TN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 78% |
| Labor | $670 | $1,350 | $2,000 | 21% |
| Permits and fees | $35 | $90 | $140 | 1% |
| Total | $4,300 | $6,500 | $8,650 | 100% |
Why Memphis prices look the way they do
Labor is 21% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Memphis the blended ratio comes out at 0.89.
Materials are scaled with BEA's regional price parity for goods. Memphis is at 96.2 against 100 for the US, so a materials line of $5,250 nationally becomes $5,050 here (midpoint, 150 linear ft). Permits follow the all-items index of 92.2: $35 to $140.
Planning more than one job in Memphis?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Memphis wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−6%) and chain-link fence lowest (−7%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,800 – $7,100 | −7% |
| Chain-link fence | 150 linear ft | $1,450 – $5,700 | −7% |
| Aluminum fence | 150 linear ft | $3,550 – $10,800 | −6% |
| Concrete slab | 400 sq ft | $2,300 – $4,850 | −7% |
Is Memphis cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Memphis. Jonesboro is the lowest at about $6,150 (midpoint, 150 linear ft), 65 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Memphis, TNthis page | $4,300 – $8,650 | $6,500 | |
| Jonesboro, AR65 miles | $4,100 – $8,150 | $6,150 | −5% |
| Jackson, TN75 miles | $4,300 – $8,600 | $6,450 | −1% |
| Little Rock, AR145 miles | $4,150 – $8,250 | $6,200 | −5% |
| Decatur, AL160 miles | $4,250 – $8,500 | $6,350 | −2% |
| Clarksville, TN170 miles | $4,300 – $8,550 | $6,400 | −1% |
| Tennessee (statewide) | $4,300 – $8,650 | $6,500 | level |
| United States | $4,550 – $9,150 | $6,850 | +6% |
Out of the 300 metros we cover, Memphis ranks #186 for the cost of this job (#1 is the most expensive). Statewide, Memphis is 0% below the Tennessee figure.
Elsewhere in Tennessee
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Nashville, TN | 1,099,300 jobs | $4,350 – $8,800 | $6,550 | +1% |
| Knoxville, TN | 424,600 jobs | $4,350 – $8,650 | $6,500 | level |
| Chattanooga, TN | 268,750 jobs | $4,300 – $8,600 | $6,450 | −1% |
| Kingsport, TN | 119,560 jobs | $4,300 – $8,600 | $6,450 | level |
| Clarksville, TN | 103,220 jobs | $4,300 – $8,550 | $6,400 | −1% |
| Jackson, TN | 84,530 jobs | $4,300 – $8,600 | $6,450 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Memphis against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Richmond, VA | 660,350 jobs | $4,350 – $8,650 | $6,500 | level |
| Hartford, CT | 599,770 jobs | $4,550 – $9,250 | $6,900 | +7% |
| Oklahoma City, OK | 677,680 jobs | $4,150 – $8,300 | $6,250 | −4% |
| Grand Rapids, MI | 598,260 jobs | $4,300 – $8,700 | $6,500 | level |
Why two Memphis quotes can differ
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Permit
Fence permits run $40-$150 depending on location.
Who does the work: Memphis trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Memphis the blend is 0.89.
Carpenters (47-2031), 50% of the weighting: a median of $24.34 an hour, 16% below the US median of $29.12. The middle half of them earn between $22.58 and $28.26 an hour. About 1,240 work in the metro. That is 20.3 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $21.54 an hour, which is 5% below the national $22.66. The middle half of them earn between $18.31 and $24.40 an hour. BLS counts 3,940 of them working in the area, 64.4 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $100 to the midpoint estimate; the 25th percentile takes off about $45. That is a swing of roughly 0.7% to 1.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Memphis has 611,670 jobs in total (BLS, May 2025), ranking 46th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $22.58 | $24.34 | $28.26 | $29.12 | 0.84 | metro |
| Construction laborers (47-2061) | 50% | $18.31 | $21.54 | $24.40 | $22.66 | 0.95 | metro |
| Blended | 100% | 0.89 | |||||
The best months for vinyl fence in Memphis
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Memphis Intl Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Memphis are September through June: 10 of 12. Outside them, July and August have an average daytime high of 90°F or more.
Memphis gets about 55 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are March, April and December (5.9 inches in April). Inside the workable window, September and October are the driest, at 3.0 and 4.0 inches. The station averages about 72 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 51 | 33 | 4.1 | Workable |
| Feb | 56 | 37 | 4.5 | Workable |
| Mar | 64 | 44 | 5.7 | Workable |
| Apr | 73 | 53 | 5.9 | Workable |
| May | 82 | 62 | 5.3 | Workable |
| Jun | 89 | 70 | 4.0 | Workable |
| Jul | 92 | 74 | 4.8 | Hot |
| Aug | 92 | 73 | 3.4 | Hot |
| Sep | 86 | 66 | 3.0 | Workable |
| Oct | 75 | 54 | 4.0 | Workable |
| Nov | 63 | 43 | 4.7 | Workable |
| Dec | 53 | 36 | 5.5 | Workable |
Optional extras in Memphis
Add-ons start from national price ranges and are scaled by 0.93 for Memphis, which is the average of the area's wage index (0.89) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $720 |
| Remove old fence | $1,400 – $2,800 |
Cost by quality level and size in Memphis
The cited range is split into basic, standard and premium bands, then scaled to Memphis. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,300 to $6,050
4-ft picket or ranch rail
Standard
$5,600 to $7,350
6-ft privacy fence, standard white
Premium
$6,900 to $8,650
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,900 – $4,050 | $3,750 – $4,950 | $4,650 – $5,800 |
| 150 ft (150 linear ft) | $4,300 – $6,050 | $5,600 – $7,350 | $6,900 – $8,650 |
| 200 ft (200 linear ft) | $5,750 – $8,050 | $7,450 – $9,750 | $9,200 – $11,500 |
| full lot (300 linear ft) | $8,600 – $12,000 | $11,200 – $14,600 | $13,700 – $17,100 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,600 to $7,350 for Memphis, TN is attached.
Detailed vinyl fence report for Memphis, TN, $9
The report lays out the vinyl fence numbers for Memphis, TN line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Memphis: your questions
+How much does it cost to install a vinyl fence in Memphis?
For 150 linear ft, expect $4,300 to $8,650 in the Memphis area. A standard-spec job lands at $5,600 to $7,350. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Memphis?
About $28.50 to $56.50 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Memphis or Jonesboro?
Jonesboro is 65 miles away. The midpoint for 150 linear ft there is $6,150, which is 5% less than Memphis ($6,500). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Memphis?
About 21% at the midpoint, or $1,350 out of $6,500. Materials are 78% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Memphis?
$5,750 to $11,500. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Memphis?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Memphis area (our national range of $40 to $150 scaled by the local price level).
+Is Memphis expensive for vinyl fence compared with the rest of Tennessee?
Memphis is 0% below the Tennessee statewide estimate ($6,500 at the midpoint). We cover 8 metros in Tennessee; see the state page to compare them.
+What do carpenters earn in Memphis?
The BLS median is $24.34 an hour in the Memphis area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.58 to $28.26.
+What do basic and premium vinyl fence work cost in Memphis?
For 150 linear ft, basic work runs $4,300 to $6,050 and premium work $6,900 to $8,650. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Memphis?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through June. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Memphis?
$140 to $720, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Memphis
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.