Vinyl fence cost in Columbus, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,200 – $8,350
- Per linear ft
- $28 – $54.50
- before permit
- Versus US midpoint
- −8%
- US $6,850
- Rank of 300 metros
- #269
- 1 = most expensive
If you want to install a vinyl fence in Columbus, plan on $4,200 to $8,350 for 150 linear ft, all in. Per linear ft, that is $28 to $54.50 for materials and labor, with the permit on top. The local midpoint runs 8% lower than the national one. Carpenters earn a median of $21.67 an hour in the Columbus area, 26% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Columbus, GA, standard level
$5,450 to $7,100
About $36 to $46.50 per linear ft before permits. Labor is about 18% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,500 | $5,650 |
| Labor | $900 | $1,350 |
| Permits and fees | $65 | $100 |
| Total | $5,450 | $7,100 |
Cost breakdown for 150 linear ft in Columbus, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,600 | $5,050 | $6,500 | 81% |
| Labor | $560 | $1,150 | $1,700 | 18% |
| Permits and fees | $35 | $85 | $130 | 1% |
| Total | $4,200 | $6,250 | $8,350 | 100% |
Why Columbus prices look the way they do
Labor is 18% of the midpoint bill here, against 22% nationally. The mix of trades behind this job is carpenters (50%), construction laborers (50%). We weight each trade's local median wage by that share and compare it with the national median. In Columbus the blended ratio comes out at 0.75.
On the materials line, the BEA goods price index for the Columbus metro is 96.3 (US = 100). The midpoint materials bill for 150 linear ft comes to $5,050, compared with $5,250 at national prices. Permit and inspection fees are scaled by the broader index (89.3) and land at $35 to $130.
Planning more than one job in Columbus?
Because every project leans on different trades, Columbus's wage level does not move all prices equally. Against the US midpoint, aluminum fence runs −11% and chain-link fence −16%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,600 – $6,700 | −13% |
| Chain-link fence | 150 linear ft | $1,350 – $5,050 | −16% |
| Aluminum fence | 150 linear ft | $3,300 – $10,200 | −11% |
| Concrete slab | 400 sq ft | $2,100 – $4,550 | −13% |
Pick a size, pick a tier: vinyl fence pricing in Columbus
Three bands are cut from the same cited range and localized for Columbus wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$4,200 to $5,850
4-ft picket or ranch rail
Standard
$5,450 to $7,100
6-ft privacy fence, standard white
Premium
$6,700 to $8,350
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $2,800 – $3,950 | $3,650 – $4,750 | $4,500 – $5,600 |
| 150 ft (150 linear ft) | $4,200 – $5,850 | $5,450 – $7,100 | $6,700 – $8,350 |
| 200 ft (200 linear ft) | $5,600 – $7,800 | $7,250 – $9,450 | $8,900 – $11,100 |
| full lot (300 linear ft) | $8,400 – $11,600 | $10,800 – $14,100 | $13,300 – $16,500 |
Vinyl fence: what moves the price in Columbus
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Removal
Taking down an old fence is $10-$20 per linear foot extra, with disposal.
Climate in Columbus: timing your vinyl fence job
We use NOAA's 1991-2020 climate normals for Columbus Metro Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Columbus (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Columbus gets about 49 inches of precipitation in a normal year. The wettest months are March, August and December (4.9 inches in March). Inside the workable window, May and October are the driest, at 3.2 and 2.8 inches. The station averages about 80 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 38 | 4.2 | Workable |
| Feb | 63 | 42 | 4.5 | Workable |
| Mar | 70 | 47 | 4.9 | Workable |
| Apr | 78 | 54 | 4.0 | Workable |
| May | 85 | 63 | 3.2 | Workable |
| Jun | 90 | 71 | 4.0 | Hot |
| Jul | 93 | 74 | 4.3 | Hot |
| Aug | 92 | 73 | 4.7 | Hot |
| Sep | 87 | 68 | 3.3 | Workable |
| Oct | 78 | 57 | 2.8 | Workable |
| Nov | 68 | 46 | 4.0 | Workable |
| Dec | 61 | 41 | 4.8 | Workable |
How Columbus compares
Same job, same size (150 linear ft), priced for the nearest metros. Warner Robins is the priciest of the group at $6,350. Dothan is the cheapest at $6,200.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Columbus, GAthis page | $4,200 – $8,350 | $6,250 | |
| Auburn, AL40 miles | $4,250 – $8,400 | $6,300 | +1% |
| Warner Robins, GA65 miles | $4,250 – $8,450 | $6,350 | +1% |
| Albany, GA70 miles | $4,150 – $8,200 | $6,200 | −1% |
| Macon, GA70 miles | $4,200 – $8,350 | $6,300 | level |
| Dothan, AL90 miles | $4,150 – $8,200 | $6,200 | −1% |
| Georgia (statewide) | $4,350 – $8,650 | $6,500 | +4% |
| United States | $4,550 – $9,150 | $6,850 | +9% |
Across 300 US metros, Columbus comes in at #269 from the top. The priciest is Honolulu, HI at $8,350; the cheapest is Brownsville, TX at $6,000 (midpoints, 150 linear ft). Statewide, Columbus is 4% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $4,450 – $8,850 | $6,650 | +6% |
| Augusta, GA | 231,930 jobs | $4,300 – $8,650 | $6,500 | +3% |
| Savannah, GA | 198,360 jobs | $4,250 – $8,350 | $6,300 | level |
| Gainesville, GA | 103,870 jobs | $4,250 – $8,400 | $6,350 | +1% |
| Athens, GA | 95,800 jobs | $4,200 – $8,350 | $6,300 | level |
| Macon, GA | 95,030 jobs | $4,200 – $8,350 | $6,300 | level |
Cities with a workforce like Columbus's
Big cities and small ones price differently, so here is Columbus against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Longview, TX | 118,060 jobs | $4,150 – $8,200 | $6,200 | −1% |
| Topeka, KS | 115,750 jobs | $4,250 – $8,550 | $6,400 | +2% |
| Utica, NY | 118,390 jobs | $4,550 – $9,150 | $6,850 | +9% |
| Tyler, TX | 115,220 jobs | $4,150 – $8,200 | $6,150 | −2% |
Columbus labor market for vinyl fence
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Columbus is 0.75 times the national level.
For carpenters (47-2031, weighted 50%) the local median is $21.67 an hour, which is 26% below the national $29.12. The middle half of them earn between $18.12 and $23.33 an hour. BLS counts 140 of them working in the area, 12.0 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Construction laborers (47-2061), 50% of the weighting: a median of $17.26 an hour, 24% below the US median of $22.66. The middle half of them earn between $13.69 and $19.00 an hour. About 710 work in the metro. That is 61.0 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($23.33 an hour) instead of the median, the labor line grows by about $45. At the 25th percentile ($18.12) it shrinks by about $90. The total moves by 0.7% or 1.5%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 116,380 jobs in the Columbus area. That makes it the 187th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $18.12 | $21.67 | $23.33 | $29.12 | 0.74 | metro |
| Construction laborers (47-2061) | 50% | $13.69 | $17.26 | $19.00 | $22.66 | 0.76 | metro |
| Blended | 100% | 0.75 | |||||
Optional extras in Columbus
Extras are quoted nationally and then scaled to Columbus by the average of the local wage index (0.75) and goods index (0.96), a factor of 0.86. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $130 – $670 |
| Remove old fence | $1,300 – $2,550 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,450 to $7,100 for Columbus, GA is attached.
Detailed vinyl fence report for Columbus, GA, $9
The report lays out the vinyl fence numbers for Columbus, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Columbus: your questions
+How much does it cost to install a vinyl fence in Columbus?
For 150 linear ft, expect $4,200 to $8,350 in the Columbus area. A standard-spec job lands at $5,450 to $7,100. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Columbus?
About $28 to $54.50 per linear ft for materials and labor, plus $35 to $130 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Columbus or Auburn?
Auburn is 40 miles away. The midpoint for 150 linear ft there is $6,300, which is 1% more than Columbus ($6,250). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Columbus?
About 18% at the midpoint, or $1,150 out of $6,250. Materials are 81% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Columbus?
$5,600 to $11,100. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Columbus?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $130 for fees in the Columbus area (our national range of $40 to $150 scaled by the local price level).
+Is Columbus expensive for vinyl fence compared with the rest of Georgia?
Columbus is 4% below the Georgia statewide estimate ($6,500 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Columbus?
The BLS median is $21.67 an hour in the Columbus area, compared with $29.12 nationally. The 25th to 75th percentile range is $18.12 to $23.33.
+What do basic and premium vinyl fence work cost in Columbus?
For 150 linear ft, basic work runs $4,200 to $5,850 and premium work $6,700 to $8,350. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Columbus?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Columbus?
$130 to $670, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Columbus
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.