Vinyl fence cost in Atlanta, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $4,450 – $8,850
- Per linear ft
- $29.50 – $58
- before permit
- Versus US midpoint
- −3%
- US $6,850
- Rank of 300 metros
- #114
- 1 = most expensive
Local price for a vinyl fence in the Atlanta area: $4,450 to $8,850 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $24.37 an hour in the Atlanta area, 16% below the US median of $29.12.
Estimate your vinyl fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Atlanta, GA, standard level
$5,800 to $7,550
About $38 to $49.50 per linear ft before permits. Labor is about 19% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $4,650 | $5,850 |
| Labor | $1,050 | $1,550 |
| Permits and fees | $75 | $120 |
| Total | $5,800 | $7,550 |
Cost breakdown for 150 linear ft in Atlanta, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $3,750 | $5,250 | $6,800 | 79% |
| Labor | $650 | $1,300 | $1,950 | 19% |
| Permits and fees | $40 | $95 | $150 | 1% |
| Total | $4,450 | $6,650 | $8,850 | 100% |
Why Atlanta prices look the way they do
We price the labor side from BLS wage data for 2 trades: carpenters at 50%, construction laborers at 50%. Weighted together, Atlanta wages are 0.86 times the national level. Labor makes up about 19% of the midpoint estimate (22% at national prices).
Materials are scaled with BEA's regional price parity for goods. Atlanta is at 100.4 against 100 for the US, so a materials line of $5,250 nationally becomes $5,250 here (midpoint, 150 linear ft). Permits follow the all-items index of 100.1: $40 to $150.
Pick a size, pick a tier: vinyl fence pricing in Atlanta
The cited range is split into basic, standard and premium bands, then scaled to Atlanta. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from backyard (100 linear ft) to full lot (300 linear ft).
Basic
$4,450 to $6,200
4-ft picket or ranch rail
Standard
$5,800 to $7,550
6-ft privacy fence, standard white
Premium
$7,100 to $8,850
Tall or colored privacy, many corners and gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $3,000 – $4,200 | $3,900 – $5,050 | $4,750 – $5,950 |
| 150 ft (150 linear ft) | $4,450 – $6,200 | $5,800 – $7,550 | $7,100 – $8,850 |
| 200 ft (200 linear ft) | $5,900 – $8,250 | $7,700 – $10,000 | $9,450 – $11,800 |
| full lot (300 linear ft) | $8,850 – $12,400 | $11,500 – $15,000 | $14,100 – $17,600 |
Why two Atlanta quotes can differ
Permit
Fence permits run $40-$150 depending on location.
Type and height
A vinyl picket fence is $30-$45 per linear foot; a 6-ft privacy fence $40-$60, and 8-ft goes to $85 (HomeGuide).
Gates
A vinyl gate costs $150-$780 installed, more for large or complex ones.
Atlanta against nearby metros and the rest of Georgia
Same job, same size (150 linear ft), priced for the nearest metros. Atlanta is the priciest of the group. Dalton is the cheapest at $6,250.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Atlanta, GAthis page | $4,450 – $8,850 | $6,650 | |
| Gainesville, GA50 miles | $4,250 – $8,400 | $6,350 | −5% |
| Athens, GA70 miles | $4,200 – $8,350 | $6,300 | −6% |
| Macon, GA70 miles | $4,200 – $8,350 | $6,300 | −6% |
| Dalton, GA80 miles | $4,200 – $8,250 | $6,250 | −6% |
| Warner Robins, GA95 miles | $4,250 – $8,450 | $6,350 | −5% |
| Georgia (statewide) | $4,350 – $8,650 | $6,500 | −2% |
| United States | $4,550 – $9,150 | $6,850 | +3% |
Out of the 300 metros we cover, Atlanta ranks #114 for the cost of this job (#1 is the most expensive). Statewide, Atlanta is 2% above the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Augusta, GA | 231,930 jobs | $4,300 – $8,650 | $6,500 | −3% |
| Savannah, GA | 198,360 jobs | $4,250 – $8,350 | $6,300 | −5% |
| Columbus, GA | 116,380 jobs | $4,200 – $8,350 | $6,250 | −6% |
| Gainesville, GA | 103,870 jobs | $4,250 – $8,400 | $6,350 | −5% |
| Athens, GA | 95,800 jobs | $4,200 – $8,350 | $6,300 | −6% |
| Macon, GA | 95,030 jobs | $4,200 – $8,350 | $6,300 | −6% |
Metros of a similar size
Big cities and small ones price differently, so here is Atlanta against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $4,500 – $9,150 | $6,800 | +2% |
| Miami, FL | 2,819,940 jobs | $4,600 – $9,200 | $6,900 | +4% |
| Washington, DC | 3,136,190 jobs | $4,750 – $9,500 | $7,100 | +7% |
| Boston, MA | 2,703,890 jobs | $4,750 – $9,800 | $7,300 | +9% |
Who does the work: Atlanta trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Atlanta the blend is 0.86.
Carpenters (47-2031), 50% of the weighting: a median of $24.37 an hour, 16% below the US median of $29.12. The middle half of them earn between $21.71 and $28.29 an hour. About 6,380 work in the metro. That is 22.1 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 50%) the local median is $20.20 an hour, which is 11% below the national $22.66. The middle half of them earn between $17.61 and $23.07 an hour. BLS counts 16,460 of them working in the area, 57.0 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $100 to the midpoint estimate; the 25th percentile takes off about $70. That is a swing of roughly 1.0% to 1.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Atlanta-Sandy Springs-Roswell has 2,889,670 jobs in total (BLS, May 2025), ranking 8th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 50% | $21.71 | $24.37 | $28.29 | $29.12 | 0.84 | metro |
| Construction laborers (47-2061) | 50% | $17.61 | $20.20 | $23.07 | $22.66 | 0.89 | metro |
| Blended | 100% | 0.86 | |||||
Add-ons priced for Atlanta
Add-ons start from national price ranges and are scaled by 0.93 for Atlanta, which is the average of the area's wage index (0.86) and goods price index (1.00). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $140 – $730 |
| Remove old fence | $1,400 – $2,800 |
The best months for vinyl fence in Atlanta
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Atlanta Fulton Co Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Atlanta are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Atlanta gets about 48 inches of precipitation in a normal year. The wettest months are February, March and July (5.0 inches in July). Inside the workable window, September and October are the driest, at 3.4 and 3.6 inches. The station averages about 54 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 54 | 34 | 4.3 | Workable |
| Feb | 58 | 37 | 4.3 | Workable |
| Mar | 66 | 43 | 4.5 | Workable |
| Apr | 74 | 50 | 3.6 | Workable |
| May | 81 | 58 | 3.6 | Workable |
| Jun | 87 | 67 | 3.8 | Workable |
| Jul | 90 | 70 | 5.0 | Hot |
| Aug | 89 | 69 | 4.0 | Workable |
| Sep | 84 | 63 | 3.4 | Workable |
| Oct | 75 | 51 | 3.6 | Workable |
| Nov | 64 | 41 | 3.8 | Workable |
| Dec | 56 | 36 | 4.2 | Workable |
Planning more than one job in Atlanta?
Jobs that often go together with vinyl fence are priced below at their usual sizes, using the same Atlanta wage and price inputs. Compared with national midpoints, aluminum fence comes out highest (−4%) and chain-link fence lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,850 – $7,250 | −6% |
| Chain-link fence | 150 linear ft | $1,450 – $5,650 | −8% |
| Aluminum fence | 150 linear ft | $3,600 – $11,000 | −4% |
| Concrete slab | 400 sq ft | $2,250 – $4,900 | −6% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,800 to $7,550 for Atlanta, GA is attached.
A detailed PDF report of this estimate, $9
The report lays out the vinyl fence numbers for Atlanta, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Vinyl fence in Atlanta: your questions
+How much does it cost to install a vinyl fence in Atlanta?
For 150 linear ft, expect $4,450 to $8,850 in the Atlanta area. A standard-spec job lands at $5,800 to $7,550. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for vinyl fence in Atlanta?
About $29.50 to $58 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $30 to $60.
+Is vinyl fence cheaper in Atlanta or Gainesville?
Gainesville is 50 miles away. The midpoint for 150 linear ft there is $6,350, which is 5% less than Atlanta ($6,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Atlanta?
About 19% at the midpoint, or $1,300 out of $6,650. Materials are 79% and permits 1%. Nationally, labor is 22%.
+What would 200 ft (200 linear ft) cost in Atlanta?
$5,900 to $11,800. Pick a different size in the estimator above to get your own number.
+Does vinyl fence need a permit in Atlanta?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Atlanta area (our national range of $40 to $150 scaled by the local price level).
+Is Atlanta expensive for vinyl fence compared with the rest of Georgia?
Atlanta is 2% above the Georgia statewide estimate ($6,500 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Atlanta?
The BLS median is $24.37 an hour in the Atlanta area, compared with $29.12 nationally. The 25th to 75th percentile range is $21.71 to $28.29.
+What do basic and premium vinyl fence work cost in Atlanta?
For 150 linear ft, basic work runs $4,450 to $6,200 and premium work $7,100 to $8,850. Basic means: 4-ft picket or ranch rail. Premium means: tall or colored privacy, many corners and gates.
+When is the best time to install a vinyl fence in Atlanta?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. September and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Atlanta?
$140 to $730, from a national range scaled by the local wage and goods indexes.
Vinyl fence near Atlanta
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Vinyl Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials are as cited ($25-$45/ft). HomeGuide reports basic labor at $5-$15/ft, so materials are most of the installed price.