Tile flooring cost in Tyler, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $2,050 – $9,100
- Per sq ft
- $10.50 – $45.50
- before permit
- Versus US midpoint
- −10%
- US $6,200
- Rank of 300 metros
- #260
- 1 = most expensive
Local price for a tile floor in the Tyler area: $2,050 to $9,100 for 200 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% lower than the US figure. Tile and stone setters earn a median of $22.61 an hour in the Tyler area, 16% below the US median of $26.77.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Tyler, TX, standard level
$4,150 to $6,950
About $21 to $35 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,250 | $4,700 |
| Labor | $1,950 | $2,250 |
| Permits and fees | $0 | $0 |
| Total | $4,150 | $6,950 |
Cost breakdown for 200 sq ft in Tyler, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $380 | $3,450 | $6,550 | 62% |
| Labor | $1,700 | $2,100 | $2,500 | 38% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,050 | $5,550 | $9,100 | 100% |
Why Tyler prices look the way they do
We price the labor side from BLS wage data for 2 trades: tile and stone setters at 85%, construction laborers at 15%. Weighted together, Tyler wages are 0.84 times the national level. Labor makes up about 38% of the midpoint estimate (40% at national prices). BLS does not publish this trade for the metro, so we used the Texas statewide median.
Materials are scaled with BEA's regional price parity for goods. Tyler is at 93.8 against 100 for the US, so a materials line of $3,700 nationally becomes $3,450 here (midpoint, 200 sq ft). Permits follow the all-items index of 92.2: $0 to $0.
Data note: 85% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Tyler. The wage table below marks each row.
Specs and site conditions that change a Tyler bid
Subfloor
Uneven or damaged subfloors need prep work before the tile goes down.
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Labor
Labor starts around $5 per sq ft for the simplest jobs and tops $20 for patterns or premium tile.
Related projects, priced for Tyler
Jobs that often go together with tile floor are priced below at their usual sizes, using the same Tyler wage and price inputs. Compared with national midpoints, shower pan comes out highest (−14%) and laminate flooring lowest (−18%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $4,650 – $10,700 | −14% |
| Laminate flooring | 500 sq ft | $1,600 – $5,800 | −18% |
| Bathroom remodel | 45 sq ft | $4,000 – $19,900 | −14% |
| Shower pan | 1 pan | $770 – $2,450 | −14% |
Is Tyler cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 200 sq ft range from $5,500 to $6,000 across Tyler and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tyler, TXthis page | $2,050 – $9,100 | $5,550 | |
| Longview, TX35 miles | $2,050 – $9,100 | $5,550 | level |
| Shreveport, LA90 miles | $2,000 – $9,000 | $5,500 | −1% |
| Texarkana, TX100 miles | $2,050 – $9,050 | $5,550 | level |
| Dallas, TX105 miles | $2,150 – $9,800 | $6,000 | +8% |
| Waco, TX130 miles | $2,050 – $9,100 | $5,550 | level |
| Texas (statewide) | $2,100 – $9,400 | $5,750 | +3% |
| United States | $2,400 – $10,000 | $6,200 | +11% |
Out of the 300 metros we cover, Tyler ranks #260 for the cost of this job (#1 is the most expensive). Statewide, Tyler is 3% below the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $2,150 – $9,800 | $6,000 | +8% |
| Houston, TX | 3,289,720 jobs | $2,100 – $9,600 | $5,850 | +5% |
| Austin, TX | 1,293,690 jobs | $2,100 – $9,150 | $5,600 | +1% |
| San Antonio, TX | 1,126,880 jobs | $2,000 – $9,000 | $5,500 | −1% |
| El Paso, TX | 339,120 jobs | $2,050 – $9,050 | $5,550 | level |
| McAllen, TX | 296,700 jobs | $2,050 – $9,050 | $5,550 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Tyler against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Topeka, KS | 115,750 jobs | $2,350 – $9,550 | $5,950 | +7% |
| Charlottesville, VA | 114,780 jobs | $2,150 – $9,450 | $5,800 | +4% |
| Columbus, GA | 116,380 jobs | $2,050 – $9,300 | $5,700 | +2% |
| Laredo, TX | 109,370 jobs | $2,050 – $9,050 | $5,550 | −1% |
Cost by quality level and size in Tyler
The cited range is split into basic, standard and premium bands, then scaled to Tyler. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from bathroom (50 sq ft) to main floor (400 sq ft).
Basic
$2,050 to $4,850
Basic ceramic or vinyl tile, simple square layout
Standard
$4,150 to $6,950
Porcelain tile, standard layout
Premium
$6,250 to $9,100
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $510 – $1,200 | $1,050 – $1,750 | $1,550 – $2,250 |
| kitchen (150 sq ft) | $1,550 – $3,650 | $3,100 – $5,250 | $4,700 – $6,800 |
| main floor (400 sq ft) | $4,100 – $9,700 | $8,300 – $13,900 | $12,500 – $18,200 |
Who does the work: Tyler trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Tyler the blend is 0.84.
Tile and stone setters (47-2044) carry 85% of the labor weighting. BLS does not publish this trade for the Tyler metro, so we used the Texas statewide median: $22.61 an hour against $26.77 for the US. The middle half of them earn between $19.28 and $26.45 an hour.
For construction laborers (47-2061, weighted 15%) the local median is $18.13 an hour, which is 20% below the national $22.66. The middle half of them earn between $16.50 and $21.54 an hour. BLS counts 650 of them working in the area, 56.4 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (tile and stone setters) from the median to the 75th percentile wage adds about $300 to the midpoint estimate; the 25th percentile takes off about $260. That is a swing of roughly 4.8% to 5.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Tyler has 115,220 jobs in total (BLS, May 2025), ranking 189th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $19.28 | $22.61 | $26.45 | $26.77 | 0.84 | state |
| Construction laborers (47-2061) | 15% | $16.50 | $18.13 | $21.54 | $22.66 | 0.80 | metro |
| Blended | 100% | 0.84 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,150 to $6,950 for Tyler, TX is attached.
Detailed tile flooring report for Tyler, TX, $9
Multi-page report for Tyler, TX: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Tyler: your questions
+How much does it cost to install a tile floor in Tyler?
For 200 sq ft, expect $2,050 to $9,100 in the Tyler area. A standard-spec job lands at $4,150 to $6,950. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Tyler?
About $10.50 to $45.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Tyler or Longview?
Longview is 35 miles away. The midpoint for 200 sq ft there is $5,550, which is 0% more than Tyler ($5,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tyler?
About 38% at the midpoint, or $2,100 out of $5,550. Materials are 62% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Tyler?
$1,550 to $6,800. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Tyler?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Tyler area (our national range of $0 to $0 scaled by the local price level).
+Is Tyler expensive for tile floor compared with the rest of Texas?
Tyler is 3% below the Texas statewide estimate ($5,750 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do tile and stone setters earn in Tyler?
BLS has no published metro figure here, so we use the statewide median of $22.61 an hour, compared with $26.77 nationally. The 25th to 75th percentile range is $19.28 to $26.45.
+What do basic and premium tile floor work cost in Tyler?
For 200 sq ft, basic work runs $2,050 to $4,850 and premium work $6,250 to $9,100. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Tyler
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.