Tile flooring cost in Chambersburg, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $2,850 – $10,700
- Per sq ft
- $14 – $53.50
- before permit
- Versus US midpoint
- +9%
- US $6,200
- Rank of 300 metros
- #26
- 1 = most expensive
Local price for a tile floor in the Chambersburg area: $2,850 to $10,700 for 200 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% higher than the US figure. Tile and stone setters earn a median of $33.77 an hour in the Chambersburg area, 26% above the US median of $26.77.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Chambersburg, PA, standard level
$5,200 to $8,350
About $26 to $42 per sq ft before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $5,050 |
| Labor | $2,800 | $3,300 |
| Permits and fees | $0 | $0 |
| Total | $5,200 | $8,350 |
Cost breakdown for 200 sq ft in Chambersburg, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $400 | $3,750 | $7,050 | 55% |
| Labor | $2,450 | $3,050 | $3,650 | 45% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,850 | $6,800 | $10,700 | 100% |
What is behind the Chambersburg number
We price the labor side from BLS wage data for 2 trades: tile and stone setters at 85%, construction laborers at 15%. Weighted together, Chambersburg wages are 1.22 times the national level. Labor makes up about 45% of the midpoint estimate (40% at national prices). BLS does not publish this trade for the metro, so we used the Pennsylvania statewide median.
Materials are scaled with BEA's regional price parity for goods. Chambersburg is at 100.7 against 100 for the US, so a materials line of $3,700 nationally becomes $3,750 here (midpoint, 200 sq ft). Permits follow the all-items index of 94.6: $0 to $0.
Data note: 85% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Chambersburg. The wage table below marks each row.
Cost by quality level and size in Chambersburg
The cited range is split into basic, standard and premium bands, then scaled to Chambersburg. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from bathroom (50 sq ft) to main floor (400 sq ft).
Basic
$2,850 to $6,000
Basic ceramic or vinyl tile, simple square layout
Standard
$5,200 to $8,350
Porcelain tile, standard layout
Premium
$7,550 to $10,700
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $710 – $1,500 | $1,300 – $2,100 | $1,900 – $2,700 |
| kitchen (150 sq ft) | $2,150 – $4,500 | $3,900 – $6,250 | $5,650 – $8,050 |
| main floor (400 sq ft) | $5,700 – $12,000 | $10,400 – $16,700 | $15,100 – $21,400 |
Planning more than one job in Chambersburg?
Jobs that often go together with tile floor are priced below at their usual sizes, using the same Chambersburg wage and price inputs. Compared with national midpoints, shower pan comes out highest (+5%) and hardwood flooring lowest (−5%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $5,250 – $12,000 | −5% |
| Laminate flooring | 500 sq ft | $1,950 – $6,850 | −2% |
| Bathroom remodel | 45 sq ft | $4,750 – $23,700 | +2% |
| Shower pan | 1 pan | $1,000 – $2,900 | +5% |
Specs and site conditions that change a Chambersburg bid
Tile type
Porcelain runs $15-$50 per sq ft installed. Luxury vinyl tile is $4-$16 (HomeGuide).
Labor
Labor starts around $5 per sq ft for the simplest jobs and tops $20 for patterns or premium tile.
Tile alone
Tile costs $2-$35 per sq ft before installation, which is what makes the range so wide.
Who does the work: Chambersburg trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Chambersburg the blend is 1.22.
Tile and stone setters (47-2044) carry 85% of the labor weighting. BLS does not publish this trade for the Chambersburg metro, so we used the Pennsylvania statewide median: $33.77 an hour against $26.77 for the US. The middle half of them earn between $24.16 and $37.82 an hour.
For construction laborers (47-2061, weighted 15%) the local median is $22.53 an hour, which is in line with the national $22.66. The middle half of them earn between $19.13 and $24.90 an hour. BLS counts 440 of them working in the area, 73.0 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (tile and stone setters) from the median to the 75th percentile wage adds about $320 to the midpoint estimate; the 25th percentile takes off about $760. That is a swing of roughly 11.3% to 4.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Chambersburg has 60,280 jobs in total (BLS, May 2025), ranking 287th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $24.16 | $33.77 | $37.82 | $26.77 | 1.26 | state |
| Construction laborers (47-2061) | 15% | $19.13 | $22.53 | $24.90 | $22.66 | 0.99 | metro |
| Blended | 100% | 1.22 | |||||
How Chambersburg compares
Of the five closest metros, 3 are cheaper than Chambersburg. Hagerstown is the lowest at about $5,650 (midpoint, 200 sq ft), 30 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Chambersburg, PAthis page | $2,850 – $10,700 | $6,800 | |
| Hagerstown, MD30 miles | $2,050 – $9,250 | $5,650 | −17% |
| Harrisburg, PA45 miles | $2,850 – $10,700 | $6,800 | level |
| Altoona, PA50 miles | $2,850 – $10,700 | $6,750 | level |
| York, PA55 miles | $2,850 – $10,700 | $6,800 | level |
| Winchester, VA60 miles | $2,150 – $9,400 | $5,800 | −15% |
| Pennsylvania (statewide) | $2,850 – $10,600 | $6,750 | level |
| United States | $2,400 – $10,000 | $6,200 | −9% |
Out of the 300 metros we cover, Chambersburg ranks #26 for the cost of this job (#1 is the most expensive). Statewide, Chambersburg is 0% above the Pennsylvania figure.
Elsewhere in Pennsylvania
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $2,900 – $10,500 | $6,700 | −1% |
| Pittsburgh, PA | 1,114,490 jobs | $2,750 – $10,500 | $6,650 | −2% |
| Allentown, PA | 377,180 jobs | $2,300 – $9,850 | $6,050 | −10% |
| Harrisburg, PA | 335,010 jobs | $2,850 – $10,700 | $6,800 | level |
| Scranton, PA | 255,620 jobs | $2,850 – $10,700 | $6,800 | level |
| Lancaster, PA | 252,230 jobs | $2,750 – $10,500 | $6,650 | −2% |
Metros of a similar size
Big cities and small ones price differently, so here is Chambersburg against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Jonesboro, AR | 60,620 jobs | $1,800 – $8,700 | $5,250 | −23% |
| Alexandria, LA | 60,000 jobs | $2,000 – $8,950 | $5,450 | −19% |
| Sheboygan, WI | 60,630 jobs | $2,650 – $10,000 | $6,300 | −7% |
| Niles, MI | 59,970 jobs | $2,150 – $9,200 | $5,650 | −16% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,200 to $8,350 for Chambersburg, PA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Chambersburg, PA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Chambersburg: your questions
+How much does it cost to install a tile floor in Chambersburg?
For 200 sq ft, expect $2,850 to $10,700 in the Chambersburg area. A standard-spec job lands at $5,200 to $8,350. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Chambersburg?
About $14 to $53.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Chambersburg or Hagerstown?
Hagerstown is 30 miles away. The midpoint for 200 sq ft there is $5,650, which is 17% less than Chambersburg ($6,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Chambersburg?
About 45% at the midpoint, or $3,050 out of $6,800. Materials are 55% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Chambersburg?
$2,150 to $8,050. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Chambersburg?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Chambersburg area (our national range of $0 to $0 scaled by the local price level).
+Is Chambersburg expensive for tile floor compared with the rest of Pennsylvania?
Chambersburg is 0% above the Pennsylvania statewide estimate ($6,750 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do tile and stone setters earn in Chambersburg?
BLS has no published metro figure here, so we use the statewide median of $33.77 an hour, compared with $26.77 nationally. The 25th to 75th percentile range is $24.16 to $37.82.
+What do basic and premium tile floor work cost in Chambersburg?
For 200 sq ft, basic work runs $2,850 to $6,000 and premium work $7,550 to $10,700. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Chambersburg
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.