Tile flooring cost in Altoona, PA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (200 sq ft)
- $2,850 – $10,700
- Per sq ft
- $14 – $53.50
- before permit
- Versus US midpoint
- +9%
- US $6,200
- Rank of 300 metros
- #28
- 1 = most expensive
Altoona homeowners pay roughly $2,850 to $10,700 to install a tile floor at 200 sq ft, or $14 to $53.50 per sq ft (permit not included). Against the US midpoint, Altoona is 9% higher. Tile and stone setters earn a median of $33.77 an hour in the Altoona area, 26% above the US median of $26.77.
Estimate your tile flooring cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 200 sq ft in Altoona, PA, standard level
$5,200 to $8,350
About $26 to $41.50 per sq ft before permits. Labor is about 45% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,400 | $5,050 |
| Labor | $2,800 | $3,300 |
| Permits and fees | $0 | $0 |
| Total | $5,200 | $8,350 |
Cost breakdown for 200 sq ft in Altoona, PA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $400 | $3,750 | $7,050 | 55% |
| Labor | $2,450 | $3,050 | $3,650 | 45% |
| Permits and fees | $0 | $0 | $0 | 0% |
| Total | $2,850 | $6,750 | $10,700 | 100% |
What is behind the Altoona number
Labor is 45% of the midpoint bill here, against 40% nationally. The mix of trades behind this job is tile and stone setters (85%), construction laborers (15%). We weight each trade's local median wage by that share and compare it with the national median. In Altoona the blended ratio comes out at 1.22. BLS does not publish this trade for the metro, so we used the Pennsylvania statewide median.
On the materials line, the BEA goods price index for the Altoona metro is 100.7 (US = 100). The midpoint materials bill for 200 sq ft comes to $3,750, compared with $3,700 at national prices. Permit and inspection fees are scaled by the broader index (89.5) and land at $0 to $0.
Data note: 85% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Altoona. The wage table below marks each row.
Specs and site conditions that change a Altoona bid
Labor
Labor starts around $5 per sq ft for the simplest jobs and tops $20 for patterns or premium tile.
Tile alone
Tile costs $2-$35 per sq ft before installation, which is what makes the range so wide.
Subfloor
Uneven or damaged subfloors need prep work before the tile goes down.
Related projects, priced for Altoona
Because every project leans on different trades, Altoona's wage level does not move all prices equally. Against the US midpoint, shower pan runs +5% and hardwood flooring level.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Hardwood flooring | 500 sq ft | $5,500 – $12,500 | level |
| Laminate flooring | 500 sq ft | $2,050 – $7,100 | +1% |
| Bathroom remodel | 45 sq ft | $4,800 – $23,700 | +2% |
| Shower pan | 1 pan | $1,000 – $2,900 | +5% |
Altoona against nearby metros and the rest of Pennsylvania
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 200 sq ft range from $5,650 to $6,850 across Altoona and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Altoona, PAthis page | $2,850 – $10,700 | $6,750 | |
| State College, PA35 miles | $2,900 – $10,800 | $6,850 | +1% |
| Chambersburg, PA50 miles | $2,850 – $10,700 | $6,800 | level |
| Harrisburg, PA65 miles | $2,850 – $10,700 | $6,800 | level |
| Hagerstown, MD65 miles | $2,050 – $9,250 | $5,650 | −17% |
| Pittsburgh, PA80 miles | $2,750 – $10,500 | $6,650 | −2% |
| Pennsylvania (statewide) | $2,850 – $10,600 | $6,750 | level |
| United States | $2,400 – $10,000 | $6,200 | −8% |
Across 300 US metros, Altoona comes in at #28 from the top. The priciest is Honolulu, HI at $8,050; the cheapest is Little Rock, AR at $5,150 (midpoints, 200 sq ft). Statewide, Altoona is 0% above the Pennsylvania figure.
Other Pennsylvania metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Philadelphia, PA | 2,897,830 jobs | $2,900 – $10,500 | $6,700 | −1% |
| Pittsburgh, PA | 1,114,490 jobs | $2,750 – $10,500 | $6,650 | −2% |
| Allentown, PA | 377,180 jobs | $2,300 – $9,850 | $6,050 | −10% |
| Harrisburg, PA | 335,010 jobs | $2,850 – $10,700 | $6,800 | level |
| Scranton, PA | 255,620 jobs | $2,850 – $10,700 | $6,800 | level |
| Lancaster, PA | 252,230 jobs | $2,750 – $10,500 | $6,650 | −2% |
Cities with a workforce like Altoona's
Big cities and small ones price differently, so here is Altoona against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Kingston, NY | 59,140 jobs | $2,600 – $10,300 | $6,400 | −5% |
| Dubuque, IA | 58,470 jobs | $2,350 – $9,500 | $5,950 | −12% |
| Niles, MI | 59,970 jobs | $2,150 – $9,200 | $5,650 | −16% |
| Albany, GA | 58,390 jobs | $2,050 – $9,250 | $5,650 | −16% |
Cost by quality level and size in Altoona
Three bands are cut from the same cited range and localized for Altoona wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$2,850 to $6,000
Basic ceramic or vinyl tile, simple square layout
Standard
$5,200 to $8,350
Porcelain tile, standard layout
Premium
$7,550 to $10,700
Large-format, natural stone or patterned layouts
| Size | Basic | Standard | Premium |
|---|---|---|---|
| bathroom (50 sq ft) | $710 – $1,500 | $1,300 – $2,100 | $1,900 – $2,700 |
| kitchen (150 sq ft) | $2,150 – $4,500 | $3,900 – $6,250 | $5,650 – $8,050 |
| main floor (400 sq ft) | $5,700 – $12,000 | $10,400 – $16,700 | $15,100 – $21,400 |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Altoona is 1.22 times the national level.
Tile and stone setters (47-2044) carry 85% of the labor weighting. BLS does not publish this trade for the Altoona metro, so we used the Pennsylvania statewide median: $33.77 an hour against $26.77 for the US. The middle half of them earn between $24.16 and $37.82 an hour.
Construction laborers (47-2061), 15% of the weighting: a median of $22.03 an hour, in line with the US median of $22.66. The middle half of them earn between $18.45 and $24.02 an hour. About 350 work in the metro. That is 59.7 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
Quotes come from real crews, not medians. If the tile and stone setters on your job are paid at the 75th percentile ($37.82 an hour) instead of the median, the labor line grows by about $320. At the 25th percentile ($24.16) it shrinks by about $760. The total moves by 4.7% or 11.3%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 58,650 jobs in the Altoona area. That makes it the 291st largest of the 300 metros we cover, with 0.04% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Tile and stone setters (47-2044) | 85% | $24.16 | $33.77 | $37.82 | $26.77 | 1.26 | state |
| Construction laborers (47-2061) | 15% | $18.45 | $22.03 | $24.02 | $22.66 | 0.97 | metro |
| Blended | 100% | 1.22 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,200 to $8,350 for Altoona, PA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Altoona, PA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Tile flooring in Altoona: your questions
+How much does it cost to install a tile floor in Altoona?
For 200 sq ft, expect $2,850 to $10,700 in the Altoona area. A standard-spec job lands at $5,200 to $8,350. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for tile floor in Altoona?
About $14 to $53.50 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $12 to $50.
+Is tile floor cheaper in Altoona or State College?
State College is 35 miles away. The midpoint for 200 sq ft there is $6,850, which is 1% more than Altoona ($6,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Altoona?
About 45% at the midpoint, or $3,050 out of $6,750. Materials are 55% and permits 0%. Nationally, labor is 40%.
+What would kitchen (150 sq ft) cost in Altoona?
$2,150 to $8,050. Pick a different size in the estimator above to get your own number.
+Does tile floor need a permit in Altoona?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Altoona area (our national range of $0 to $0 scaled by the local price level).
+Is Altoona expensive for tile floor compared with the rest of Pennsylvania?
Altoona is 0% above the Pennsylvania statewide estimate ($6,750 at the midpoint). We cover 12 metros in Pennsylvania; see the state page to compare them.
+What do tile and stone setters earn in Altoona?
BLS has no published metro figure here, so we use the statewide median of $33.77 an hour, compared with $26.77 nationally. The 25th to 75th percentile range is $24.16 to $37.82.
+What do basic and premium tile floor work cost in Altoona?
For 200 sq ft, basic work runs $2,850 to $6,000 and premium work $7,550 to $10,700. Basic means: basic ceramic or vinyl tile, simple square layout. Premium means: large-format, natural stone or patterned layouts.
Tile flooring near Altoona
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.