Shower pan cost in Las Cruces, NM
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $730 – $2,350
- Per pan
- $700 – $1,915
- before permit
- Versus US midpoint
- −17%
- US $1,850
- Rank of 300 metros
- #296
- 1 = most expensive
Local price for a shower pan in the Las Cruces area: $730 to $2,350 for 1 pan. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 17% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $26.23 an hour in the Las Cruces area, 14% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Las Cruces, NM, standard level
$1,200 to $1,850
About $1,065 to $1,550 per pan before permits. Labor is about 50% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $680 |
| Labor | $690 | $870 |
| Permits and fees | $150 | $320 |
| Total | $1,200 | $1,850 |
Cost breakdown for 1 pan in Las Cruces, NM
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $530 | $910 | 34% |
| Labor | $560 | $780 | $1,000 | 50% |
| Permits and fees | $25 | $240 | $450 | 15% |
| Total | $730 | $1,550 | $2,350 | 100% |
What is behind the Las Cruces number
Labor is 50% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (50%), tile and stone setters (50%). We weight each trade's local median wage by that share and compare it with the national median. In Las Cruces the blended ratio comes out at 0.74.
Materials are scaled with BEA's regional price parity for goods. Las Cruces is at 96.1 against 100 for the US, so a materials line of $550 nationally becomes $530 here (midpoint, 1 pan). Permits follow the all-items index of 90.2: $25 to $450.
Las Cruces against nearby metros and the rest of New Mexico
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,550 to $1,750 across Las Cruces and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Las Cruces, NMthis page | $730 – $2,350 | $1,550 | |
| El Paso, TX95 miles | $800 – $2,500 | $1,650 | +6% |
| Albuquerque, NM195 miles | $860 – $2,650 | $1,750 | +13% |
| Santa Fe, NM225 miles | $720 – $2,400 | $1,550 | level |
| Odessa, TX255 miles | $850 – $2,600 | $1,700 | +11% |
| Midland, TX285 miles | $840 – $2,600 | $1,700 | +11% |
| New Mexico (statewide) | $830 – $2,550 | $1,700 | +10% |
| United States | $930 – $2,800 | $1,850 | +21% |
Out of the 300 metros we cover, Las Cruces ranks #296 for the cost of this job (#1 is the most expensive). Statewide, Las Cruces is 9% below the New Mexico figure.
Elsewhere in New Mexico
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Albuquerque, NM | 404,700 jobs | $860 – $2,650 | $1,750 | +13% |
| Santa Fe, NM | 61,770 jobs | $720 – $2,400 | $1,550 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Las Cruces against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Jefferson City, MO | 80,220 jobs | $870 – $2,600 | $1,750 | +12% |
| Saginaw, MI | 80,000 jobs | $960 – $2,800 | $1,850 | +21% |
| Greenville, NC | 80,770 jobs | $810 – $2,500 | $1,650 | +7% |
| Merced, CA | 79,510 jobs | $940 – $2,850 | $1,900 | +22% |
What nearby projects cost in Las Cruces
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Las Cruces wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−6%) and kitchen backsplash lowest (−16%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,100 – $20,400 | −13% |
| Kitchen cabinets | 25 linear ft | $4,000 – $13,100 | −6% |
| Window replacement | 10 windows | $4,150 – $14,000 | −7% |
| Kitchen remodel | 120 sq ft | $17,400 – $29,500 | −6% |
| Kitchen backsplash | 30 sq ft | $240 – $1,250 | −16% |
Who does the work: Las Cruces trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Las Cruces the blend is 0.74.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $26.23 an hour, 14% below the US median of $30.67. The middle half of them earn between $21.03 and $34.06 an hour. About 180 work in the metro. That is 22.5 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.
Tile and stone setters (47-2044), 50% of the weighting: a median of $16.81 an hour, 37% below the US median of $26.77. The middle half of them earn between $15.71 and $21.55 an hour. About 30 work in the metro. That is 3.8 per 10,000 jobs, compared with 2.3 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $130 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 5.8% to 8.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Las Cruces has 80,000 jobs in total (BLS, May 2025), ranking 238th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $21.03 | $26.23 | $34.06 | $30.67 | 0.86 | metro |
| Tile and stone setters (47-2044) | 50% | $15.71 | $16.81 | $21.55 | $26.77 | 0.63 | metro |
| Blended | 100% | 0.74 | |||||
Las Cruces: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Las Cruces. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$730 to $1,400
Pre-made acrylic or fiberglass pan
Standard
$1,200 to $1,850
Tile-ready pan with tile finish
Premium
$1,700 to $2,350
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $730 – $1,400 | $1,200 – $1,850 | $1,700 – $2,350 |
Why two Las Cruces quotes can differ
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,200 to $1,850 for Las Cruces, NM is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Las Cruces, NM: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Las Cruces: your questions
+How much does it cost to install a shower pan in Las Cruces?
For 1 pan, expect $730 to $2,350 in the Las Cruces area. A standard-spec job lands at $1,200 to $1,850. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Las Cruces?
About $700 to $1,915 per pan for materials and labor, plus $25 to $450 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Las Cruces or El Paso?
El Paso is 95 miles away. The midpoint for 1 pan there is $1,650, which is 6% more than Las Cruces ($1,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Las Cruces?
About 50% at the midpoint, or $780 out of $1,550. Materials are 34% and permits 15%. Nationally, labor is 56%.
+What would one shower pan cost in Las Cruces?
$730 to $2,350. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Las Cruces?
Often, but rules are set by your city or county building office, so call before you hire. Budget $25 to $450 for fees in the Las Cruces area (our national range of $30 to $500 scaled by the local price level).
+Is Las Cruces expensive for shower pan compared with the rest of New Mexico?
Las Cruces is 9% below the New Mexico statewide estimate ($1,700 at the midpoint). We cover 3 metros in New Mexico; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Las Cruces?
The BLS median is $26.23 an hour in the Las Cruces area, compared with $30.67 nationally. The 25th to 75th percentile range is $21.03 to $34.06.
+What do basic and premium shower pan work cost in Las Cruces?
For 1 pan, basic work runs $730 to $1,400 and premium work $1,700 to $2,350. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Las Cruces
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.