Shower pan cost in Jefferson City, MO
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $870 – $2,600
- Per pan
- $841 – $2,154
- before permit
- Versus US midpoint
- −7%
- US $1,850
- Rank of 300 metros
- #182
- 1 = most expensive
Jefferson City homeowners pay roughly $870 to $2,600 to install a shower pan at 1 pan, or $841 to $2,154 per pan (permit not included). Against the US midpoint, Jefferson City is 7% lower. Plumbers, pipefitters and steamfitters earn a median of $23.83 an hour in the Jefferson City area, 22% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Jefferson City, MO, standard level
$1,400 to $2,100
About $1,235 to $1,760 per pan before permits. Labor is about 57% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $670 |
| Labor | $870 | $1,100 |
| Permits and fees | $150 | $320 |
| Total | $1,400 | $2,100 |
Cost breakdown for 1 pan in Jefferson City, MO
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $520 | $890 | 30% |
| Labor | $700 | $980 | $1,250 | 57% |
| Permits and fees | $25 | $230 | $440 | 13% |
| Total | $870 | $1,750 | $2,600 | 100% |
Where the Jefferson City price comes from
We price the labor side from BLS wage data for 2 trades: plumbers, pipefitters and steamfitters at 50%, tile and stone setters at 50%. Weighted together, Jefferson City wages are 0.93 times the national level. Labor makes up about 57% of the midpoint estimate (56% at national prices).
On the materials line, the BEA goods price index for the Jefferson City metro is 94.2 (US = 100). The midpoint materials bill for 1 pan comes to $520, compared with $550 at national prices. Permit and inspection fees are scaled by the broader index (88.0) and land at $25 to $440.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Jefferson City. The wage table below marks each row.
Is Jefferson City cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,650 to $2,150 across Jefferson City and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Jefferson City, MOthis page | $870 – $2,600 | $1,750 | |
| Columbia, MO35 miles | $920 – $2,700 | $1,800 | +4% |
| St. Louis, MO95 miles | $1,050 – $3,000 | $2,050 | +18% |
| Springfield, MO105 miles | $810 – $2,500 | $1,650 | −4% |
| Kansas City, MO130 miles | $1,000 – $2,850 | $1,950 | +11% |
| Springfield, IL150 miles | $1,200 – $3,150 | $2,150 | +25% |
| Missouri (statewide) | $970 – $2,800 | $1,900 | +9% |
| United States | $930 – $2,800 | $1,850 | +8% |
Across 300 US metros, Jefferson City comes in at #182 from the top. The priciest is Bellingham, WA at $2,450; the cheapest is Jonesboro, AR at $1,500 (midpoints, 1 pan). Statewide, Jefferson City is 9% below the Missouri figure.
Other Missouri metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| St. Louis, MO | 1,341,320 jobs | $1,050 – $3,000 | $2,050 | +18% |
| Kansas City, MO | 1,096,110 jobs | $1,000 – $2,850 | $1,950 | +11% |
| Springfield, MO | 223,030 jobs | $810 – $2,500 | $1,650 | −4% |
| Columbia, MO | 107,680 jobs | $920 – $2,700 | $1,800 | +4% |
| Joplin, MO | 87,190 jobs | $950 – $2,750 | $1,850 | +7% |
Cities with a workforce like Jefferson City's
Big cities and small ones price differently, so here is Jefferson City against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Greenville, NC | 80,770 jobs | $810 – $2,500 | $1,650 | −4% |
| Las Cruces, NM | 80,000 jobs | $730 – $2,350 | $1,550 | −11% |
| Odessa, TX | 80,910 jobs | $850 – $2,600 | $1,700 | −1% |
| Saginaw, MI | 80,000 jobs | $960 – $2,800 | $1,850 | +8% |
Related projects, priced for Jefferson City
Because every project leans on different trades, Jefferson City's wage level does not move all prices equally. Against the US midpoint, kitchen backsplash runs level and kitchen cabinets −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,500 – $22,300 | −4% |
| Kitchen cabinets | 25 linear ft | $3,950 – $13,100 | −7% |
| Window replacement | 10 windows | $4,200 – $14,000 | −6% |
| Kitchen remodel | 120 sq ft | $17,500 – $29,800 | −5% |
| Kitchen backsplash | 30 sq ft | $300 – $1,500 | level |
Cost by quality level and size in Jefferson City
Three bands are cut from the same cited range and localized for Jefferson City wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 1 common sizes.
Basic
$870 to $1,550
Pre-made acrylic or fiberglass pan
Standard
$1,400 to $2,100
Tile-ready pan with tile finish
Premium
$1,900 to $2,600
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $870 – $1,550 | $1,400 – $2,100 | $1,900 – $2,600 |
Specs and site conditions that change a Jefferson City bid
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Jefferson City is 0.93 times the national level.
For plumbers, pipefitters and steamfitters (47-2152, weighted 50%) the local median is $23.83 an hour, which is 22% below the national $30.67. The middle half of them earn between $23.83 and $29.20 an hour. BLS counts 290 of them working in the area, 36.2 for every 10,000 jobs (US: 30.0), so the local bench is deeper than average.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Jefferson City metro, so we used the Missouri statewide median: $29.13 an hour against $26.77 for the US. The middle half of them earn between $20.86 and $35.61 an hour.
Quotes come from real crews, not medians. If the plumbers, pipefitters and steamfitters on your job are paid at the 75th percentile ($29.20 an hour) instead of the median, the labor line grows by about $90. At the 25th percentile ($23.83) it shrinks by about $0. The total moves by 5.3% or 0.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 80,220 jobs in the Jefferson City area. That makes it the 237th largest of the 300 metros we cover, with 0.05% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $23.83 | $23.83 | $29.20 | $30.67 | 0.78 | metro |
| Tile and stone setters (47-2044) | 50% | $20.86 | $29.13 | $35.61 | $26.77 | 1.09 | state |
| Blended | 100% | 0.93 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,400 to $2,100 for Jefferson City, MO is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Jefferson City, MO: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Jefferson City: your questions
+How much does it cost to install a shower pan in Jefferson City?
For 1 pan, expect $870 to $2,600 in the Jefferson City area. A standard-spec job lands at $1,400 to $2,100. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Jefferson City?
About $841 to $2,154 per pan for materials and labor, plus $25 to $440 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Jefferson City or Columbia?
Columbia is 35 miles away. The midpoint for 1 pan there is $1,800, which is 4% more than Jefferson City ($1,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Jefferson City?
About 57% at the midpoint, or $980 out of $1,750. Materials are 30% and permits 13%. Nationally, labor is 56%.
+What would one shower pan cost in Jefferson City?
$870 to $2,600. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Jefferson City?
Often, but rules are set by your city or county building office, so call before you hire. Budget $25 to $440 for fees in the Jefferson City area (our national range of $30 to $500 scaled by the local price level).
+Is Jefferson City expensive for shower pan compared with the rest of Missouri?
Jefferson City is 9% below the Missouri statewide estimate ($1,900 at the midpoint). We cover 6 metros in Missouri; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Jefferson City?
The BLS median is $23.83 an hour in the Jefferson City area, compared with $30.67 nationally. The 25th to 75th percentile range is $23.83 to $29.20.
+What do basic and premium shower pan work cost in Jefferson City?
For 1 pan, basic work runs $870 to $1,550 and premium work $1,900 to $2,600. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Jefferson City
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.