Shower pan cost in Niles, MI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $840 – $2,550
- Per pan
- $815 – $2,104
- before permit
- Versus US midpoint
- −9%
- US $1,850
- Rank of 300 metros
- #201
- 1 = most expensive
Local price for a shower pan in the Niles area: $840 to $2,550 for 1 pan. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Plumbers, pipefitters and steamfitters earn a median of $28.76 an hour in the Niles area, 6% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Niles, MI, standard level
$1,350 to $2,050
About $1,202 to $1,718 per pan before permits. Labor is about 55% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $670 |
| Labor | $840 | $1,050 |
| Permits and fees | $160 | $330 |
| Total | $1,350 | $2,050 |
Cost breakdown for 1 pan in Niles, MI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $520 | $890 | 30% |
| Labor | $670 | $940 | $1,200 | 55% |
| Permits and fees | $30 | $240 | $460 | 14% |
| Total | $840 | $1,700 | $2,550 | 100% |
What is behind the Niles number
Labor is 55% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (50%), tile and stone setters (50%). We weight each trade's local median wage by that share and compare it with the national median. In Niles the blended ratio comes out at 0.90.
Materials are scaled with BEA's regional price parity for goods. Niles is at 93.7 against 100 for the US, so a materials line of $550 nationally becomes $520 here (midpoint, 1 pan). Permits follow the all-items index of 92.4: $30 to $460.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Niles. The wage table below marks each row.
Shower pan: what moves the price in Niles
Extras
Benches, trench drains and curb changes add $100-$600.
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Is Niles cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,700 to $2,400 across Niles and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Niles, MIthis page | $840 – $2,550 | $1,700 | |
| South Bend, IN30 miles | $930 – $2,750 | $1,850 | +7% |
| Elkhart, IN45 miles | $880 – $2,600 | $1,750 | +3% |
| Chicago, IL55 miles | $1,300 – $3,550 | $2,400 | +42% |
| Kalamazoo, MI70 miles | $1,100 – $3,050 | $2,100 | +22% |
| Kenosha, WI80 miles | $1,050 – $3,100 | $2,100 | +22% |
| Michigan (statewide) | $970 – $2,800 | $1,900 | +11% |
| United States | $930 – $2,800 | $1,850 | +9% |
Out of the 300 metros we cover, Niles ranks #201 for the cost of this job (#1 is the most expensive). Statewide, Niles is 10% below the Michigan figure.
Elsewhere in Michigan
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $1,000 – $2,950 | $1,950 | +16% |
| Grand Rapids, MI | 598,260 jobs | $960 – $2,800 | $1,850 | +10% |
| Ann Arbor, MI | 219,730 jobs | $950 – $2,800 | $1,900 | +10% |
| Lansing, MI | 217,180 jobs | $950 – $2,750 | $1,850 | +9% |
| Flint, MI | 135,040 jobs | $960 – $2,800 | $1,900 | +10% |
| Kalamazoo, MI | 121,790 jobs | $1,100 – $3,050 | $2,100 | +22% |
Metros of a similar size
Big cities and small ones price differently, so here is Niles against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Alexandria, LA | 60,000 jobs | $810 – $2,450 | $1,650 | −4% |
| Kingston, NY | 59,140 jobs | $1,000 – $2,950 | $1,950 | +16% |
| Chambersburg, PA | 60,280 jobs | $1,000 – $2,900 | $1,950 | +15% |
| Altoona, PA | 58,650 jobs | $1,000 – $2,900 | $1,950 | +15% |
Who does the work: Niles trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Niles the blend is 0.90.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $28.76 an hour, 6% below the US median of $30.67. The middle half of them earn between $23.29 and $31.63 an hour. About 90 work in the metro. That is 15.0 per 10,000 jobs, compared with 30.0 nationally, so expect fewer local crews to bid.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Niles metro, so we used the Michigan statewide median: $23.05 an hour against $26.77 for the US. The middle half of them earn between $20.17 and $30.08 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $50 to the midpoint estimate; the 25th percentile takes off about $95. That is a swing of roughly 5.5% to 2.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Niles has 59,970 jobs in total (BLS, May 2025), ranking 289th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $23.29 | $28.76 | $31.63 | $30.67 | 0.94 | metro |
| Tile and stone setters (47-2044) | 50% | $20.17 | $23.05 | $30.08 | $26.77 | 0.86 | state |
| Blended | 100% | 0.90 | |||||
Niles: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Niles. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$840 to $1,550
Pre-made acrylic or fiberglass pan
Standard
$1,350 to $2,050
Tile-ready pan with tile finish
Premium
$1,900 to $2,550
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $840 – $1,550 | $1,350 – $2,050 | $1,900 – $2,550 |
Related projects, priced for Niles
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Niles wage and price inputs. Compared with national midpoints, kitchen remodel comes out highest (−6%) and kitchen backsplash lowest (−9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,400 – $21,700 | −7% |
| Kitchen cabinets | 25 linear ft | $3,950 – $12,900 | −7% |
| Window replacement | 10 windows | $4,200 – $14,000 | −7% |
| Kitchen remodel | 120 sq ft | $17,300 – $29,500 | −6% |
| Kitchen backsplash | 30 sq ft | $270 – $1,350 | −9% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,350 to $2,050 for Niles, MI is attached.
Detailed shower pan report for Niles, MI, $9
The report lays out the shower pan numbers for Niles, MI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Niles: your questions
+How much does it cost to install a shower pan in Niles?
For 1 pan, expect $840 to $2,550 in the Niles area. A standard-spec job lands at $1,350 to $2,050. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Niles?
About $815 to $2,104 per pan for materials and labor, plus $30 to $460 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Niles or South Bend?
South Bend is 30 miles away. The midpoint for 1 pan there is $1,850, which is 7% more than Niles ($1,700). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Niles?
About 55% at the midpoint, or $940 out of $1,700. Materials are 30% and permits 14%. Nationally, labor is 56%.
+What would one shower pan cost in Niles?
$840 to $2,550. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Niles?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $460 for fees in the Niles area (our national range of $30 to $500 scaled by the local price level).
+Is Niles expensive for shower pan compared with the rest of Michigan?
Niles is 10% below the Michigan statewide estimate ($1,900 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Niles?
The BLS median is $28.76 an hour in the Niles area, compared with $30.67 nationally. The 25th to 75th percentile range is $23.29 to $31.63.
+What do basic and premium shower pan work cost in Niles?
For 1 pan, basic work runs $840 to $1,550 and premium work $1,900 to $2,550. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Niles
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.