Shower pan cost in Flint, MI
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $960 – $2,800
- Per pan
- $937 – $2,323
- before permit
- Versus US midpoint
- +1%
- US $1,850
- Rank of 300 metros
- #117
- 1 = most expensive
Local price for a shower pan in the Flint area: $960 to $2,800 for 1 pan. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Plumbers, pipefitters and steamfitters earn a median of $38.71 an hour in the Flint area, 26% above the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Flint, MI, standard level
$1,500 to $2,250
About $1,353 to $1,907 per pan before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $670 |
| Labor | $990 | $1,250 |
| Permits and fees | $160 | $330 |
| Total | $1,500 | $2,250 |
Cost breakdown for 1 pan in Flint, MI
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $520 | $890 | 27% |
| Labor | $800 | $1,100 | $1,450 | 59% |
| Permits and fees | $30 | $250 | $470 | 13% |
| Total | $960 | $1,900 | $2,800 | 100% |
Where the Flint price comes from
We price the labor side from BLS wage data for 2 trades: plumbers, pipefitters and steamfitters at 50%, tile and stone setters at 50%. Weighted together, Flint wages are 1.06 times the national level. Labor makes up about 59% of the midpoint estimate (56% at national prices).
Materials are scaled with BEA's regional price parity for goods. Flint is at 93.7 against 100 for the US, so a materials line of $550 nationally becomes $520 here (midpoint, 1 pan). Permits follow the all-items index of 93.0: $30 to $470.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Flint. The wage table below marks each row.
How Flint compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,850 to $1,950 across Flint and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Flint, MIthis page | $960 – $2,800 | $1,900 | |
| Saginaw, MI30 miles | $960 – $2,800 | $1,850 | level |
| Detroit, MI35 miles | $1,000 – $2,950 | $1,950 | +5% |
| Lansing, MI50 miles | $950 – $2,750 | $1,850 | −1% |
| Ann Arbor, MI55 miles | $950 – $2,800 | $1,900 | level |
| Grand Rapids, MI100 miles | $960 – $2,800 | $1,850 | level |
| Michigan (statewide) | $970 – $2,800 | $1,900 | +1% |
| United States | $930 – $2,800 | $1,850 | −1% |
Out of the 300 metros we cover, Flint ranks #117 for the cost of this job (#1 is the most expensive). Statewide, Flint is 1% below the Michigan figure.
Elsewhere in Michigan
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $1,000 – $2,950 | $1,950 | +5% |
| Grand Rapids, MI | 598,260 jobs | $960 – $2,800 | $1,850 | level |
| Ann Arbor, MI | 219,730 jobs | $950 – $2,800 | $1,900 | level |
| Lansing, MI | 217,180 jobs | $950 – $2,750 | $1,850 | −1% |
| Kalamazoo, MI | 121,790 jobs | $1,100 – $3,050 | $2,100 | +11% |
| Saginaw, MI | 80,000 jobs | $960 – $2,800 | $1,850 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Flint against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Evansville, IN | 135,250 jobs | $1,000 – $2,850 | $1,950 | +3% |
| College Station, TX | 134,040 jobs | $780 – $2,450 | $1,600 | −14% |
| Rockford, IL | 137,650 jobs | $1,150 – $3,150 | $2,150 | +16% |
| South Bend, IN | 131,670 jobs | $930 – $2,750 | $1,850 | −2% |
Specs and site conditions that change a Flint bid
Extras
Benches, trench drains and curb changes add $100-$600.
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
What nearby projects cost in Flint
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Flint wage and price inputs. Compared with national midpoints, bathroom remodel comes out highest (+1%) and kitchen backsplash lowest (−9%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,750 – $23,600 | +1% |
| Kitchen cabinets | 25 linear ft | $4,150 – $14,000 | level |
| Window replacement | 10 windows | $4,250 – $14,100 | −6% |
| Kitchen remodel | 120 sq ft | $17,900 – $30,400 | −4% |
| Kitchen backsplash | 30 sq ft | $270 – $1,350 | −9% |
Pick a size, pick a tier: shower pan pricing in Flint
The cited range is split into basic, standard and premium bands, then scaled to Flint. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$960 to $1,700
Pre-made acrylic or fiberglass pan
Standard
$1,500 to $2,250
Tile-ready pan with tile finish
Premium
$2,050 to $2,800
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $960 – $1,700 | $1,500 – $2,250 | $2,050 – $2,800 |
Who does the work: Flint trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Flint the blend is 1.06.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $38.71 an hour, 26% above the US median of $30.67. The middle half of them earn between $28.11 and $47.94 an hour. About 790 work in the metro. That is 58.5 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Flint metro, so we used the Michigan statewide median: $23.05 an hour against $26.77 for the US. The middle half of them earn between $20.17 and $30.08 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $160 to the midpoint estimate; the 25th percentile takes off about $180. That is a swing of roughly 9.7% to 8.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Flint has 135,040 jobs in total (BLS, May 2025), ranking 163rd by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $28.11 | $38.71 | $47.94 | $30.67 | 1.26 | metro |
| Tile and stone setters (47-2044) | 50% | $20.17 | $23.05 | $30.08 | $26.77 | 0.86 | state |
| Blended | 100% | 1.06 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,500 to $2,250 for Flint, MI is attached.
Take this estimate with you: PDF report, $9
The report lays out the shower pan numbers for Flint, MI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Flint: your questions
+How much does it cost to install a shower pan in Flint?
For 1 pan, expect $960 to $2,800 in the Flint area. A standard-spec job lands at $1,500 to $2,250. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Flint?
About $937 to $2,323 per pan for materials and labor, plus $30 to $470 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Flint or Saginaw?
Saginaw is 30 miles away. The midpoint for 1 pan there is $1,850, which is 0% less than Flint ($1,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Flint?
About 59% at the midpoint, or $1,100 out of $1,900. Materials are 27% and permits 13%. Nationally, labor is 56%.
+What would one shower pan cost in Flint?
$960 to $2,800. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Flint?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $470 for fees in the Flint area (our national range of $30 to $500 scaled by the local price level).
+Is Flint expensive for shower pan compared with the rest of Michigan?
Flint is 1% below the Michigan statewide estimate ($1,900 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Flint?
The BLS median is $38.71 an hour in the Flint area, compared with $30.67 nationally. The 25th to 75th percentile range is $28.11 to $47.94.
+What do basic and premium shower pan work cost in Flint?
For 1 pan, basic work runs $960 to $1,700 and premium work $2,050 to $2,800. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Flint
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.