Shower pan cost in Fort Wayne, IN
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $950 – $2,750
- Per pan
- $921 – $2,299
- before permit
- Versus US midpoint
- −1%
- US $1,850
- Rank of 300 metros
- #123
- 1 = most expensive
A shower pan in Fort Wayne, IN usually costs $950 to $2,750 for 1 pan. That works out to about $921 to $2,299 per pan before permits. That is within a few percent of the national midpoint, so there is little local premium or discount. Plumbers, pipefitters and steamfitters earn a median of $37.07 an hour in the Fort Wayne area, 21% above the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Fort Wayne, IN, standard level
$1,500 to $2,200
About $1,334 to $1,886 per pan before permits. Labor is about 59% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $370 | $670 |
| Labor | $970 | $1,200 |
| Permits and fees | $160 | $330 |
| Total | $1,500 | $2,200 |
Cost breakdown for 1 pan in Fort Wayne, IN
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $520 | $900 | 28% |
| Labor | $780 | $1,100 | $1,400 | 59% |
| Permits and fees | $30 | $250 | $460 | 13% |
| Total | $950 | $1,850 | $2,750 | 100% |
Why Fort Wayne prices look the way they do
Labor is 59% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (50%), tile and stone setters (50%). We weight each trade's local median wage by that share and compare it with the national median. In Fort Wayne the blended ratio comes out at 1.04.
Materials are scaled with BEA's regional price parity for goods. Fort Wayne is at 94.3 against 100 for the US, so a materials line of $550 nationally becomes $520 here (midpoint, 1 pan). Permits follow the all-items index of 92.6: $30 to $460.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Fort Wayne. The wage table below marks each row.
How Fort Wayne compares
Of the five closest metros, 4 are cheaper than Fort Wayne. Niles is the lowest at about $1,700 (midpoint, 1 pan), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Fort Wayne, INthis page | $950 – $2,750 | $1,850 | |
| Elkhart, IN55 miles | $880 – $2,600 | $1,750 | −6% |
| South Bend, IN70 miles | $930 – $2,750 | $1,850 | −1% |
| Kalamazoo, MI85 miles | $1,100 – $3,050 | $2,100 | +12% |
| Toledo, OH85 miles | $870 – $2,600 | $1,750 | −7% |
| Niles, MI95 miles | $840 – $2,550 | $1,700 | −8% |
| Indiana (statewide) | $950 – $2,750 | $1,850 | level |
| United States | $930 – $2,800 | $1,850 | +1% |
Out of the 300 metros we cover, Fort Wayne ranks #123 for the cost of this job (#1 is the most expensive). Statewide, Fort Wayne is 0% below the Indiana figure.
Elsewhere in Indiana
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Indianapolis, IN | 1,105,170 jobs | $960 – $2,800 | $1,900 | +1% |
| Evansville, IN | 135,250 jobs | $1,000 – $2,850 | $1,950 | +4% |
| South Bend, IN | 131,670 jobs | $930 – $2,750 | $1,850 | −1% |
| Elkhart, IN | 127,730 jobs | $880 – $2,600 | $1,750 | −6% |
| Lafayette, IN | 102,200 jobs | $860 – $2,600 | $1,750 | −6% |
| Bloomington, IN | 73,240 jobs | $1,050 – $3,000 | $2,050 | +9% |
Metros of a similar size
Big cities and small ones price differently, so here is Fort Wayne against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Augusta, GA | 231,930 jobs | $820 – $2,550 | $1,650 | −10% |
| Springfield, MO | 223,030 jobs | $810 – $2,500 | $1,650 | −11% |
| Trenton, NJ | 240,190 jobs | $1,050 – $3,050 | $2,050 | +10% |
| Deltona, FL | 219,740 jobs | $780 – $2,500 | $1,650 | −11% |
Shower pan: what moves the price in Fort Wayne
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
What local crews earn in Fort Wayne
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Fort Wayne the blend is 1.04.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $37.07 an hour, 21% above the US median of $30.67. The middle half of them earn between $29.14 and $49.29 an hour. About 1,160 work in the metro. That is 51.4 per 10,000 jobs, compared with 30.0 nationally, which suggests plenty of local crews to bid.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Fort Wayne metro, so we used the Indiana statewide median: $23.29 an hour against $26.77 for the US. The middle half of them earn between $20.64 and $27.66 an hour.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $210 to the midpoint estimate; the 25th percentile takes off about $140. That is a swing of roughly 7.3% to 11.3% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Fort Wayne has 225,520 jobs in total (BLS, May 2025), ranking 107th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $29.14 | $37.07 | $49.29 | $30.67 | 1.21 | metro |
| Tile and stone setters (47-2044) | 50% | $20.64 | $23.29 | $27.66 | $26.77 | 0.87 | state |
| Blended | 100% | 1.04 | |||||
Cost by quality level and size in Fort Wayne
The cited range is split into basic, standard and premium bands, then scaled to Fort Wayne. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$950 to $1,650
Pre-made acrylic or fiberglass pan
Standard
$1,500 to $2,200
Tile-ready pan with tile finish
Premium
$2,050 to $2,750
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $950 – $1,650 | $1,500 – $2,200 | $2,050 – $2,750 |
Related projects, priced for Fort Wayne
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Fort Wayne wage and price inputs. Compared with national midpoints, kitchen cabinets comes out highest (−2%) and kitchen backsplash lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,600 – $22,900 | −2% |
| Kitchen cabinets | 25 linear ft | $4,100 – $13,800 | −2% |
| Window replacement | 10 windows | $4,350 – $14,500 | −3% |
| Kitchen remodel | 120 sq ft | $17,700 – $30,200 | −4% |
| Kitchen backsplash | 30 sq ft | $270 – $1,400 | −8% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,500 to $2,200 for Fort Wayne, IN is attached.
Detailed shower pan report for Fort Wayne, IN, $9
Multi-page report for Fort Wayne, IN: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Fort Wayne: your questions
+How much does it cost to install a shower pan in Fort Wayne?
For 1 pan, expect $950 to $2,750 in the Fort Wayne area. A standard-spec job lands at $1,500 to $2,200. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Fort Wayne?
About $921 to $2,299 per pan for materials and labor, plus $30 to $460 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Fort Wayne or Elkhart?
Elkhart is 55 miles away. The midpoint for 1 pan there is $1,750, which is 6% less than Fort Wayne ($1,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Fort Wayne?
About 59% at the midpoint, or $1,100 out of $1,850. Materials are 28% and permits 13%. Nationally, labor is 56%.
+What would one shower pan cost in Fort Wayne?
$950 to $2,750. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Fort Wayne?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $460 for fees in the Fort Wayne area (our national range of $30 to $500 scaled by the local price level).
+Is Fort Wayne expensive for shower pan compared with the rest of Indiana?
Fort Wayne is 0% below the Indiana statewide estimate ($1,850 at the midpoint). We cover 8 metros in Indiana; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Fort Wayne?
The BLS median is $37.07 an hour in the Fort Wayne area, compared with $30.67 nationally. The 25th to 75th percentile range is $29.14 to $49.29.
+What do basic and premium shower pan work cost in Fort Wayne?
For 1 pan, basic work runs $950 to $1,650 and premium work $2,050 to $2,750. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Fort Wayne
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.