Shower pan cost in Riverside, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $930 – $2,850
- Per pan
- $897 – $2,305
- before permit
- Versus US midpoint
- +1%
- US $1,850
- Rank of 300 metros
- #113
- 1 = most expensive
Local price for a shower pan in the Riverside area: $930 to $2,850 for 1 pan. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Permit and fee costs follow the local price level, which sits 6% above the US average.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Riverside, CA, standard level
$1,500 to $2,250
About $1,320 to $1,883 per pan before permits. Labor is about 55% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $400 | $720 |
| Labor | $920 | $1,150 |
| Permits and fees | $180 | $380 |
| Total | $1,500 | $2,250 |
Cost breakdown for 1 pan in Riverside, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $150 | $560 | $960 | 30% |
| Labor | $750 | $1,050 | $1,350 | 55% |
| Permits and fees | $30 | $280 | $530 | 15% |
| Total | $930 | $1,900 | $2,850 | 100% |
What is behind the Riverside number
Labor is 55% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (50%), tile and stone setters (50%). We weight each trade's local median wage by that share and compare it with the national median. In Riverside the blended ratio comes out at 0.99.
Materials are scaled with BEA's regional price parity for goods. Riverside is at 101.4 against 100 for the US, so a materials line of $550 nationally becomes $560 here (midpoint, 1 pan). Permits follow the all-items index of 106.4: $30 to $530.
Riverside: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Riverside. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from one shower pan to one shower pan.
Basic
$930 to $1,700
Pre-made acrylic or fiberglass pan
Standard
$1,500 to $2,250
Tile-ready pan with tile finish
Premium
$2,050 to $2,850
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $930 – $1,700 | $1,500 – $2,250 | $2,050 – $2,850 |
How Riverside compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,900 to $2,050 across Riverside and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Riverside, CAthis page | $930 – $2,850 | $1,900 | |
| San Diego, CA110 miles | $1,000 – $3,050 | $2,050 | +8% |
| El Centro, CA115 miles | $950 – $2,850 | $1,900 | +1% |
| Los Angeles, CA120 miles | $1,000 – $3,050 | $2,050 | +8% |
| Las Vegas, NV130 miles | $950 – $2,800 | $1,900 | level |
| Bakersfield, CA155 miles | $980 – $2,900 | $1,950 | +3% |
| California (statewide) | $1,000 – $3,050 | $2,050 | +8% |
| United States | $930 – $2,800 | $1,850 | −1% |
Out of the 300 metros we cover, Riverside ranks #113 for the cost of this job (#1 is the most expensive). Statewide, Riverside is 7% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $1,000 – $3,050 | $2,050 | +8% |
| San Francisco, CA | 2,373,920 jobs | $1,100 – $3,200 | $2,150 | +14% |
| San Diego, CA | 1,538,060 jobs | $1,000 – $3,050 | $2,050 | +8% |
| San Jose, CA | 1,134,970 jobs | $1,250 – $3,450 | $2,350 | +25% |
| Sacramento, CA | 1,080,590 jobs | $950 – $2,900 | $1,950 | +2% |
| Fresno, CA | 476,890 jobs | $930 – $2,850 | $1,900 | level |
Metros of a similar size
Big cities and small ones price differently, so here is Riverside against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Detroit, MI | 1,904,530 jobs | $1,000 – $2,950 | $1,950 | +5% |
| Denver, CO | 1,609,350 jobs | $950 – $2,850 | $1,900 | +1% |
| Minneapolis, MN | 1,951,650 jobs | $1,250 – $3,450 | $2,350 | +25% |
| San Diego, CA | 1,538,060 jobs | $1,000 – $3,050 | $2,050 | +8% |
Planning more than one job in Riverside?
Jobs that often go together with shower pan are priced below at their usual sizes, using the same Riverside wage and price inputs. Compared with national midpoints, kitchen cabinets comes out highest (+9%) and kitchen backsplash lowest (+1%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,850 – $24,100 | +3% |
| Kitchen cabinets | 25 linear ft | $4,500 – $15,300 | +9% |
| Window replacement | 10 windows | $4,700 – $15,600 | +4% |
| Kitchen remodel | 120 sq ft | $19,100 – $32,600 | +3% |
| Kitchen backsplash | 30 sq ft | $300 – $1,500 | +1% |
Specs and site conditions that change a Riverside bid
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Extras
Benches, trench drains and curb changes add $100-$600.
Who does the work: Riverside trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Riverside the blend is 0.99.
Plumbers, pipefitters and steamfitters (47-2152), 50% of the weighting: a median of $30.73 an hour, in line with the US median of $30.67. The middle half of them earn between $25.57 and $39.06 an hour. About 4,510 work in the metro. That is 26.3 per 10,000 jobs, compared with 30.0 nationally, so the supply of crews looks typical.
Tile and stone setters (47-2044), 50% of the weighting: a median of $26.37 an hour, in line with the US median of $26.77. The middle half of them earn between $22.13 and $32.47 an hour. About 940 work in the metro. That is 5.5 per 10,000 jobs, compared with 2.3 nationally, which suggests plenty of local crews to bid.
A quick sensitivity check: moving the lead trade (plumbers, pipefitters and steamfitters) from the median to the 75th percentile wage adds about $140 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 4.7% to 7.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Riverside-San Bernardino-Ontario has 1,716,760 jobs in total (BLS, May 2025), ranking 16th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $25.57 | $30.73 | $39.06 | $30.67 | 1.00 | metro |
| Tile and stone setters (47-2044) | 50% | $22.13 | $26.37 | $32.47 | $26.77 | 0.99 | metro |
| Blended | 100% | 0.99 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,500 to $2,250 for Riverside, CA is attached.
A detailed PDF report of this estimate, $9
The report lays out the shower pan numbers for Riverside, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Riverside: your questions
+How much does it cost to install a shower pan in Riverside?
For 1 pan, expect $930 to $2,850 in the Riverside area. A standard-spec job lands at $1,500 to $2,250. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Riverside?
About $897 to $2,305 per pan for materials and labor, plus $30 to $530 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Riverside or San Diego?
San Diego is 110 miles away. The midpoint for 1 pan there is $2,050, which is 8% more than Riverside ($1,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Riverside?
About 55% at the midpoint, or $1,050 out of $1,900. Materials are 30% and permits 15%. Nationally, labor is 56%.
+What would one shower pan cost in Riverside?
$930 to $2,850. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Riverside?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $530 for fees in the Riverside area (our national range of $30 to $500 scaled by the local price level).
+Is Riverside expensive for shower pan compared with the rest of California?
Riverside is 7% below the California statewide estimate ($2,050 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Riverside?
The BLS median is $30.73 an hour in the Riverside area, compared with $30.67 nationally. The 25th to 75th percentile range is $25.57 to $39.06.
+What do basic and premium shower pan work cost in Riverside?
For 1 pan, basic work runs $930 to $1,700 and premium work $2,050 to $2,850. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Riverside
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.