Shower pan cost in Bakersfield, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $980 – $2,900
- Per pan
- $945 – $2,416
- before permit
- Versus US midpoint
- +4%
- US $1,850
- Rank of 300 metros
- #89
- 1 = most expensive
Bakersfield homeowners pay roughly $980 to $2,900 to install a shower pan at 1 pan, or $945 to $2,416 per pan (permit not included). Against the US midpoint, Bakersfield is 4% higher. Plumbers, pipefitters and steamfitters earn a median of $31.95 an hour in the Bakersfield area, 4% above the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Bakersfield, CA, standard level
$1,550 to $2,350
About $1,386 to $1,975 per pan before permits. Labor is about 57% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $410 | $750 |
| Labor | $980 | $1,250 |
| Permits and fees | $170 | $360 |
| Total | $1,550 | $2,350 |
Cost breakdown for 1 pan in Bakersfield, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $160 | $580 | $1,000 | 30% |
| Labor | $790 | $1,100 | $1,400 | 57% |
| Permits and fees | $30 | $270 | $500 | 14% |
| Total | $980 | $1,950 | $2,900 | 100% |
Where the Bakersfield price comes from
We price the labor side from BLS wage data for 2 trades: plumbers, pipefitters and steamfitters at 50%, tile and stone setters at 50%. Weighted together, Bakersfield wages are 1.05 times the national level. Labor makes up about 57% of the midpoint estimate (56% at national prices).
On the materials line, the BEA goods price index for the Bakersfield metro is 105.2 (US = 100). The midpoint materials bill for 1 pan comes to $580, compared with $550 at national prices. Permit and inspection fees are scaled by the broader index (100.9) and land at $30 to $500.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Bakersfield. The wage table below marks each row.
Why two Bakersfield quotes can differ
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Bakersfield: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Bakersfield wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 1 common sizes.
Basic
$980 to $1,750
Pre-made acrylic or fiberglass pan
Standard
$1,550 to $2,350
Tile-ready pan with tile finish
Premium
$2,150 to $2,900
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $980 – $1,750 | $1,550 – $2,350 | $2,150 – $2,900 |
What nearby projects cost in Bakersfield
Because every project leans on different trades, Bakersfield's wage level does not move all prices equally. Against the US midpoint, bathroom remodel runs +7% and kitchen backsplash +6%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $5,050 – $25,000 | +7% |
| Kitchen cabinets | 25 linear ft | $4,500 – $15,000 | +7% |
| Window replacement | 10 windows | $4,800 – $16,000 | +7% |
| Kitchen remodel | 120 sq ft | $19,600 – $33,400 | +6% |
| Kitchen backsplash | 30 sq ft | $320 – $1,600 | +6% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Bakersfield is 1.05 times the national level.
For plumbers, pipefitters and steamfitters (47-2152, weighted 50%) the local median is $31.95 an hour, which is 4% above the national $30.67. The middle half of them earn between $26.23 and $45.10 an hour. BLS counts 960 of them working in the area, 28.4 for every 10,000 jobs (US: 30.0), so the local bench is about average.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Bakersfield metro, so we used the California statewide median: $28.31 an hour against $26.77 for the US. The middle half of them earn between $22.86 and $35.61 an hour.
Quotes come from real crews, not medians. If the plumbers, pipefitters and steamfitters on your job are paid at the 75th percentile ($45.10 an hour) instead of the median, the labor line grows by about $230. At the 25th percentile ($26.23) it shrinks by about $100. The total moves by 11.6% or 5.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 338,230 jobs in the Bakersfield-Delano area. That makes it the 77th largest of the 300 metros we cover, with 0.22% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $26.23 | $31.95 | $45.10 | $30.67 | 1.04 | metro |
| Tile and stone setters (47-2044) | 50% | $22.86 | $28.31 | $35.61 | $26.77 | 1.06 | state |
| Blended | 100% | 1.05 | |||||
How Bakersfield compares
Of the five closest metros, 3 are cheaper than Bakersfield. San Luis Obispo is the lowest at about $1,900 (midpoint, 1 pan), 95 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Bakersfield, CAthis page | $980 – $2,900 | $1,950 | |
| Visalia, CA60 miles | $1,000 – $3,000 | $2,000 | +3% |
| Oxnard, CA70 miles | $930 – $2,900 | $1,900 | −2% |
| Los Angeles, CA90 miles | $1,000 – $3,050 | $2,050 | +4% |
| Santa Maria, CA95 miles | $940 – $2,900 | $1,900 | −1% |
| San Luis Obispo, CA95 miles | $920 – $2,850 | $1,900 | −3% |
| California (statewide) | $1,000 – $3,050 | $2,050 | +4% |
| United States | $930 – $2,800 | $1,850 | −4% |
Across 300 US metros, Bakersfield comes in at #89 from the top. The priciest is Bellingham, WA at $2,450; the cheapest is Jonesboro, AR at $1,500 (midpoints, 1 pan). Statewide, Bakersfield is 4% below the California figure.
Other California metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $1,000 – $3,050 | $2,050 | +4% |
| San Francisco, CA | 2,373,920 jobs | $1,100 – $3,200 | $2,150 | +10% |
| Riverside, CA | 1,716,760 jobs | $930 – $2,850 | $1,900 | −3% |
| San Diego, CA | 1,538,060 jobs | $1,000 – $3,050 | $2,050 | +5% |
| San Jose, CA | 1,134,970 jobs | $1,250 – $3,450 | $2,350 | +20% |
| Sacramento, CA | 1,080,590 jobs | $950 – $2,900 | $1,950 | −1% |
Cities with a workforce like Bakersfield's
Big cities and small ones price differently, so here is Bakersfield against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| El Paso, TX | 339,120 jobs | $800 – $2,500 | $1,650 | −16% |
| Harrisburg, PA | 335,010 jobs | $1,100 – $3,100 | $2,100 | +7% |
| North Port, FL | 339,940 jobs | $820 – $2,600 | $1,700 | −12% |
| Oxnard, CA | 323,890 jobs | $930 – $2,900 | $1,900 | −2% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,550 to $2,350 for Bakersfield, CA is attached.
Detailed shower pan report for Bakersfield, CA, $9
The report lays out the shower pan numbers for Bakersfield, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Bakersfield: your questions
+How much does it cost to install a shower pan in Bakersfield?
For 1 pan, expect $980 to $2,900 in the Bakersfield area. A standard-spec job lands at $1,550 to $2,350. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Bakersfield?
About $945 to $2,416 per pan for materials and labor, plus $30 to $500 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Bakersfield or Visalia?
Visalia is 60 miles away. The midpoint for 1 pan there is $2,000, which is 3% more than Bakersfield ($1,950). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Bakersfield?
About 57% at the midpoint, or $1,100 out of $1,950. Materials are 30% and permits 14%. Nationally, labor is 56%.
+What would one shower pan cost in Bakersfield?
$980 to $2,900. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Bakersfield?
Often, but rules are set by your city or county building office, so call before you hire. Budget $30 to $500 for fees in the Bakersfield area (our national range of $30 to $500 scaled by the local price level).
+Is Bakersfield expensive for shower pan compared with the rest of California?
Bakersfield is 4% below the California statewide estimate ($2,050 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Bakersfield?
The BLS median is $31.95 an hour in the Bakersfield area, compared with $30.67 nationally. The 25th to 75th percentile range is $26.23 to $45.10.
+What do basic and premium shower pan work cost in Bakersfield?
For 1 pan, basic work runs $980 to $1,750 and premium work $2,150 to $2,900. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Bakersfield
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.