Shower pan cost in Montgomery, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $810 – $2,500
- Per pan
- $787 – $2,072
- before permit
- Versus US midpoint
- −11%
- US $1,850
- Rank of 300 metros
- #232
- 1 = most expensive
If you want to install a shower pan in Montgomery, plan on $810 to $2,500 for 1 pan, all in. Per pan, that is $787 to $2,072 for materials and labor, with the permit on top. The local midpoint runs 11% lower than the national one. Plumbers, pipefitters and steamfitters earn a median of $27.87 an hour in the Montgomery area, 9% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Montgomery, AL, standard level
$1,350 to $2,000
About $1,173 to $1,687 per pan before permits. Labor is about 54% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $380 | $680 |
| Labor | $800 | $1,000 |
| Permits and fees | $150 | $320 |
| Total | $1,350 | $2,000 |
Cost breakdown for 1 pan in Montgomery, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $530 | $920 | 32% |
| Labor | $640 | $900 | $1,150 | 54% |
| Permits and fees | $25 | $240 | $450 | 14% |
| Total | $810 | $1,650 | $2,500 | 100% |
Where the Montgomery price comes from
Labor is 54% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is plumbers, pipefitters and steamfitters (50%), tile and stone setters (50%). We weight each trade's local median wage by that share and compare it with the national median. In Montgomery the blended ratio comes out at 0.86.
On the materials line, the BEA goods price index for the Montgomery metro is 96.4 (US = 100). The midpoint materials bill for 1 pan comes to $530, compared with $550 at national prices. Permit and inspection fees are scaled by the broader index (89.7) and land at $25 to $450.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Montgomery. The wage table below marks each row.
Specs and site conditions that change a Montgomery bid
Extras
Benches, trench drains and curb changes add $100-$600.
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Related projects, priced for Montgomery
Because every project leans on different trades, Montgomery's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −7% and kitchen cabinets −12%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,200 – $20,700 | −11% |
| Kitchen cabinets | 25 linear ft | $3,850 – $12,100 | −12% |
| Window replacement | 10 windows | $4,050 – $13,800 | −8% |
| Kitchen remodel | 120 sq ft | $17,200 – $29,300 | −7% |
| Kitchen backsplash | 30 sq ft | $260 – $1,350 | −10% |
Montgomery: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Montgomery wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 1 common sizes.
Basic
$810 to $1,500
Pre-made acrylic or fiberglass pan
Standard
$1,350 to $2,000
Tile-ready pan with tile finish
Premium
$1,850 to $2,500
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $810 – $1,500 | $1,350 – $2,000 | $1,850 – $2,500 |
Montgomery labor market for shower pan
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Montgomery is 0.86 times the national level.
For plumbers, pipefitters and steamfitters (47-2152, weighted 50%) the local median is $27.87 an hour, which is 9% below the national $30.67. The middle half of them earn between $22.19 and $29.79 an hour. BLS counts 340 of them working in the area, 20.5 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Montgomery metro, so we used the Alabama statewide median: $21.54 an hour against $26.77 for the US. The middle half of them earn between $17.91 and $22.86 an hour.
Quotes come from real crews, not medians. If the plumbers, pipefitters and steamfitters on your job are paid at the 75th percentile ($29.79 an hour) instead of the median, the labor line grows by about $35. At the 25th percentile ($22.19) it shrinks by about $95. The total moves by 2.0% or 5.8%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 165,550 jobs in the Montgomery area. That makes it the 142nd largest of the 300 metros we cover, with 0.11% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $22.19 | $27.87 | $29.79 | $30.67 | 0.91 | metro |
| Tile and stone setters (47-2044) | 50% | $17.91 | $21.54 | $22.86 | $26.77 | 0.80 | state |
| Blended | 100% | 0.86 | |||||
Is Montgomery cheap or dear? The local comparison
Same job, same size (1 pan), priced for the nearest metros. Birmingham is the priciest of the group at $1,700. Dothan is the cheapest at $1,600.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Montgomery, ALthis page | $810 – $2,500 | $1,650 | |
| Auburn, AL50 miles | $780 – $2,450 | $1,600 | −3% |
| Birmingham, AL80 miles | $830 – $2,550 | $1,700 | +2% |
| Columbus, GA90 miles | $770 – $2,450 | $1,600 | −4% |
| Dothan, AL95 miles | $760 – $2,400 | $1,600 | −5% |
| Tuscaloosa, AL95 miles | $820 – $2,550 | $1,650 | level |
| Alabama (statewide) | $820 – $2,500 | $1,650 | level |
| United States | $930 – $2,800 | $1,850 | +12% |
Across 300 US metros, Montgomery comes in at #232 from the top. The priciest is Bellingham, WA at $2,450; the cheapest is Jonesboro, AR at $1,500 (midpoints, 1 pan). Statewide, Montgomery is 0% below the Alabama figure.
Other Alabama metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $830 – $2,550 | $1,700 | +2% |
| Huntsville, AL | 266,650 jobs | $820 – $2,550 | $1,700 | +1% |
| Mobile, AL | 172,550 jobs | $820 – $2,550 | $1,650 | level |
| Tuscaloosa, AL | 108,460 jobs | $820 – $2,550 | $1,650 | level |
| Daphne, AL | 87,120 jobs | $810 – $2,550 | $1,650 | level |
| Auburn, AL | 72,710 jobs | $780 – $2,450 | $1,600 | −3% |
Cities with a workforce like Montgomery's
Big cities and small ones price differently, so here is Montgomery against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Peoria, IL | 166,020 jobs | $1,100 – $3,050 | $2,100 | +25% |
| Spartanburg, SC | 165,150 jobs | $770 – $2,450 | $1,600 | −3% |
| Lubbock, TX | 166,780 jobs | $770 – $2,450 | $1,600 | −4% |
| Beaumont, TX | 163,220 jobs | $850 – $2,550 | $1,700 | +3% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,350 to $2,000 for Montgomery, AL is attached.
Detailed shower pan report for Montgomery, AL, $9
The report lays out the shower pan numbers for Montgomery, AL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Montgomery: your questions
+How much does it cost to install a shower pan in Montgomery?
For 1 pan, expect $810 to $2,500 in the Montgomery area. A standard-spec job lands at $1,350 to $2,000. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Montgomery?
About $787 to $2,072 per pan for materials and labor, plus $25 to $450 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Montgomery or Auburn?
Auburn is 50 miles away. The midpoint for 1 pan there is $1,600, which is 3% less than Montgomery ($1,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Montgomery?
About 54% at the midpoint, or $900 out of $1,650. Materials are 32% and permits 14%. Nationally, labor is 56%.
+What would one shower pan cost in Montgomery?
$810 to $2,500. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Montgomery?
Often, but rules are set by your city or county building office, so call before you hire. Budget $25 to $450 for fees in the Montgomery area (our national range of $30 to $500 scaled by the local price level).
+Is Montgomery expensive for shower pan compared with the rest of Alabama?
Montgomery is 0% below the Alabama statewide estimate ($1,650 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Montgomery?
The BLS median is $27.87 an hour in the Montgomery area, compared with $30.67 nationally. The 25th to 75th percentile range is $22.19 to $29.79.
+What do basic and premium shower pan work cost in Montgomery?
For 1 pan, basic work runs $810 to $1,500 and premium work $1,850 to $2,500. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Montgomery
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.