Shower pan cost in Columbus, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1 pan)
- $770 – $2,450
- Per pan
- $745 – $1,997
- before permit
- Versus US midpoint
- −14%
- US $1,850
- Rank of 300 metros
- #277
- 1 = most expensive
Columbus homeowners pay roughly $770 to $2,450 to install a shower pan at 1 pan, or $745 to $1,997 per pan (permit not included). Against the US midpoint, Columbus is 14% lower. Plumbers, pipefitters and steamfitters earn a median of $22.79 an hour in the Columbus area, 26% below the US median of $30.67.
Estimate your shower pan cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1 pan in Columbus, GA, standard level
$1,250 to $1,950
About $1,121 to $1,621 per pan before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $380 | $680 |
| Labor | $750 | $940 |
| Permits and fees | $150 | $320 |
| Total | $1,250 | $1,950 |
Cost breakdown for 1 pan in Columbus, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $140 | $530 | $920 | 33% |
| Labor | $600 | $840 | $1,100 | 52% |
| Permits and fees | $25 | $240 | $450 | 15% |
| Total | $770 | $1,600 | $2,450 | 100% |
Where the Columbus price comes from
The wage side of the estimate leans on plumbers, pipefitters and steamfitters, who do 50% of the hours on a typical job. Their local median is $22.79 an hour. Add the other trades involved and the blended wage index for Columbus is 0.80 (US = 1.00), which puts labor at 52% of the total.
On the materials line, the BEA goods price index for the Columbus metro is 96.3 (US = 100). The midpoint materials bill for 1 pan comes to $530, compared with $550 at national prices. Permit and inspection fees are scaled by the broader index (89.3) and land at $25 to $450.
Data note: 50% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Columbus. The wage table below marks each row.
Specs and site conditions that change a Columbus bid
Tile
Tile for the shower costs $10-$50 per square foot installed, and that comes on top of the pan.
Permit
Plumbing permits are $30-$500, and many cities require one to replace a shower pan.
Pre-made versus custom
Pre-made trays are $500-$1,550 installed; a custom tile pan is $900-$3,500; a custom stone pan is $1,200-$2,000 or more (HomeGuide).
Planning more than one job in Columbus?
Because every project leans on different trades, Columbus's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −7% and kitchen cabinets −15%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Bathroom remodel | 45 sq ft | $4,150 – $20,500 | −12% |
| Kitchen cabinets | 25 linear ft | $3,800 – $11,800 | −15% |
| Window replacement | 10 windows | $4,100 – $13,800 | −8% |
| Kitchen remodel | 120 sq ft | $17,100 – $29,200 | −7% |
| Kitchen backsplash | 30 sq ft | $270 – $1,400 | −8% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Columbus is 0.80 times the national level.
For plumbers, pipefitters and steamfitters (47-2152, weighted 50%) the local median is $22.79 an hour, which is 26% below the national $30.67. The middle half of them earn between $20.58 and $29.28 an hour. BLS counts 200 of them working in the area, 17.2 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.
Tile and stone setters (47-2044) carry 50% of the labor weighting. BLS does not publish this trade for the Columbus metro, so we used the Georgia statewide median: $23.00 an hour against $26.77 for the US. The middle half of them earn between $20.94 and $27.57 an hour.
Quotes come from real crews, not medians. If the plumbers, pipefitters and steamfitters on your job are paid at the 75th percentile ($29.28 an hour) instead of the median, the labor line grows by about $110. At the 25th percentile ($20.58) it shrinks by about $40. The total moves by 6.9% or 2.4%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 116,380 jobs in the Columbus area. That makes it the 187th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Plumbers, pipefitters and steamfitters (47-2152) | 50% | $20.58 | $22.79 | $29.28 | $30.67 | 0.74 | metro |
| Tile and stone setters (47-2044) | 50% | $20.94 | $23.00 | $27.57 | $26.77 | 0.86 | state |
| Blended | 100% | 0.80 | |||||
Columbus: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Columbus wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 1 common sizes.
Basic
$770 to $1,450
Pre-made acrylic or fiberglass pan
Standard
$1,250 to $1,950
Tile-ready pan with tile finish
Premium
$1,750 to $2,450
Custom mud or stone pan
| Size | Basic | Standard | Premium |
|---|---|---|---|
| one shower pan | $770 – $1,450 | $1,250 – $1,950 | $1,750 – $2,450 |
Columbus against nearby metros and the rest of Georgia
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1 pan range from $1,600 to $1,700 across Columbus and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Columbus, GAthis page | $770 – $2,450 | $1,600 | |
| Auburn, AL40 miles | $780 – $2,450 | $1,600 | level |
| Warner Robins, GA65 miles | $840 – $2,600 | $1,700 | +6% |
| Albany, GA70 miles | $770 – $2,450 | $1,600 | level |
| Macon, GA70 miles | $780 – $2,450 | $1,600 | level |
| Dothan, AL90 miles | $760 – $2,400 | $1,600 | −2% |
| Georgia (statewide) | $840 – $2,600 | $1,700 | +7% |
| United States | $930 – $2,800 | $1,850 | +16% |
Across 300 US metros, Columbus comes in at #277 from the top. The priciest is Bellingham, WA at $2,450; the cheapest is Jonesboro, AR at $1,500 (midpoints, 1 pan). Statewide, Columbus is 7% below the Georgia figure.
Other Georgia metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $850 – $2,650 | $1,750 | +9% |
| Augusta, GA | 231,930 jobs | $820 – $2,550 | $1,650 | +4% |
| Savannah, GA | 198,360 jobs | $850 – $2,600 | $1,750 | +8% |
| Gainesville, GA | 103,870 jobs | $800 – $2,500 | $1,650 | +3% |
| Athens, GA | 95,800 jobs | $830 – $2,550 | $1,700 | +6% |
| Macon, GA | 95,030 jobs | $780 – $2,450 | $1,600 | level |
Cities with a workforce like Columbus's
Big cities and small ones price differently, so here is Columbus against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Longview, TX | 118,060 jobs | $800 – $2,500 | $1,650 | +2% |
| Topeka, KS | 115,750 jobs | $980 – $2,800 | $1,900 | +17% |
| Utica, NY | 118,390 jobs | $1,000 – $2,900 | $1,950 | +23% |
| Tyler, TX | 115,220 jobs | $770 – $2,450 | $1,600 | level |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,250 to $1,950 for Columbus, GA is attached.
Detailed shower pan report for Columbus, GA, $9
The report lays out the shower pan numbers for Columbus, GA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Shower pan in Columbus: your questions
+How much does it cost to install a shower pan in Columbus?
For 1 pan, expect $770 to $2,450 in the Columbus area. A standard-spec job lands at $1,250 to $1,950. Small jobs usually cost more per pan and large ones less.
+What is the price per pan for shower pan in Columbus?
About $745 to $1,997 per pan for materials and labor, plus $25 to $450 for the permit if one is needed. The US range is $900 to $2,300.
+Is shower pan cheaper in Columbus or Auburn?
Auburn is 40 miles away. The midpoint for 1 pan there is $1,600, which is 0% more than Columbus ($1,600). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Columbus?
About 52% at the midpoint, or $840 out of $1,600. Materials are 33% and permits 15%. Nationally, labor is 56%.
+What would one shower pan cost in Columbus?
$770 to $2,450. Pick a different size in the estimator above to get your own number.
+Does shower pan need a permit in Columbus?
Often, but rules are set by your city or county building office, so call before you hire. Budget $25 to $450 for fees in the Columbus area (our national range of $30 to $500 scaled by the local price level).
+Is Columbus expensive for shower pan compared with the rest of Georgia?
Columbus is 7% below the Georgia statewide estimate ($1,700 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do plumbers, pipefitters and steamfitters earn in Columbus?
The BLS median is $22.79 an hour in the Columbus area, compared with $30.67 nationally. The 25th to 75th percentile range is $20.58 to $29.28.
+What do basic and premium shower pan work cost in Columbus?
For 1 pan, basic work runs $770 to $1,450 and premium work $1,750 to $2,450. Basic means: pre-made acrylic or fiberglass pan. Premium means: custom mud or stone pan.
Shower pan near Columbus
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.