Skip to content
CostLocal

Paver patio cost in Waco, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (300 sq ft)
$2,650 – $4,850
Per sq ft
$8.90 – $15
before permit
Versus US midpoint
−11%
US $4,250
Rank of 300 metros
#261
1 = most expensive

If you want to install a paver patio in Waco, plan on $2,650 to $4,850 for 300 sq ft, all in. Per sq ft, that is $8.90 to $15 for materials and labor, with the permit on top. The local midpoint runs 11% lower than the national one. Construction laborers earn a median of $18.08 an hour in the Waco area, 20% below the US median of $22.66.

Estimate your paver patio cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade pavers, a border or curve, some regrading

Add-ons

Estimated cost for 300 sq ft in Waco, TX, standard level

$3,300 to $4,200

About $10.50 to $13 per sq ft before permits. Labor is about 58% of the bill.

Cost breakdown
PartLowHigh
Materials$1,300$1,500
Labor$1,950$2,450
Permits and fees$95$230
Total$3,300$4,200
Save and get a PDF report

Cost breakdown for 300 sq ft in Waco, TX

Part of the jobLowMidpointHighShare
Materials$1,150$1,400$1,70037%
Labor$1,550$2,200$2,85058%
Permits and fees$0$160$3204%
Total$2,650$3,750$4,850100%

Why Waco prices look the way they do

The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $18.08 an hour. Add the other trades involved and the blended wage index for Waco is 0.86 (US = 1.00), which puts labor at 58% of the total.

On the materials line, the BEA goods price index for the Waco metro is 93.8 (US = 100). The midpoint materials bill for 300 sq ft comes to $1,400, compared with $1,500 at national prices. Permit and inspection fees are scaled by the broader index (92.5) and land at $0 to $320.

Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Waco. The wage table below marks each row.

Climate in Waco: timing your paver patio job

We use NOAA's 1991-2020 climate normals for Waco Rgnl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

October through May is the stretch where digging, grading and setting material in the ground runs into the fewest weather problems in Waco (8 of 12 months). June, July, August and September have an average daytime high of 90°F or more.

Waco gets about 36 inches of precipitation in a normal year. The wettest months are May, June and October (4.4 inches in May). Inside the workable window, January and February are the driest, at 2.6 and 2.7 inches. The station averages about 115 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Waco Rgnl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan59362.6Workable
Feb63402.7Workable
Mar70473.3Workable
Apr78553.3Workable
May85634.4Workable
Jun93713.4Hot
Jul97741.8Hot
Aug97742.0Hot
Sep91672.9Hot
Oct81564.4Workable
Nov69462.7Workable
Dec60382.9Workable

Cost by quality level and size in Waco

Three bands are cut from the same cited range and localized for Waco wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$2,650 to $3,550

Basic concrete pavers, simple pattern, level yard

Standard

$3,300 to $4,200

Mid-grade pavers, a border or curve, some regrading

Premium

$3,950 to $4,850

Natural stone or clay brick, complex pattern, slope or retaining edge

Cost by size and quality level
SizeBasicStandardPremium
12x12 (144 sq ft)$1,300 – $1,750$1,650 – $2,150$2,000 – $2,500
16x16 (256 sq ft)$2,300 – $3,050$2,850 – $3,600$3,400 – $4,200
20x20 (400 sq ft)$3,550 – $4,650$4,400 – $5,500$5,250 – $6,350
pool deck (800 sq ft)$7,100 – $9,200$8,700 – $10,800$10,300 – $12,400

Waco against nearby metros and the rest of Texas

Of the five closest metros, 1 is cheaper than Waco. College Station is the lowest at about $3,600 (midpoint, 300 sq ft), 75 miles away.

Comparison with nearby areas
AreaRangeMidpointvs. here
Waco, TXthis page$2,650 – $4,850$3,750
Killeen, TX40 miles$2,650 – $4,850$3,750level
College Station, TX75 miles$2,550 – $4,650$3,600−4%
Dallas, TX90 miles$2,950 – $5,350$4,150+10%
Austin, TX95 miles$2,850 – $5,200$4,000+7%
Tyler, TX130 miles$2,650 – $4,850$3,750level
Texas (statewide)$2,800 – $5,050$3,900+4%
United States$3,000 – $5,450$4,250+13%

Across 300 US metros, Waco comes in at #261 from the top. The priciest is Kahului, HI at $5,650; the cheapest is Dothan, AL at $3,500 (midpoints, 300 sq ft). Statewide, Waco is 4% below the Texas figure.

Other Texas metros

Texas metros compared with Waco
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$2,950 – $5,350$4,150+10%
Houston, TX3,289,720 jobs$2,800 – $5,100$3,950+6%
Austin, TX1,293,690 jobs$2,850 – $5,200$4,000+7%
San Antonio, TX1,126,880 jobs$2,700 – $4,900$3,800+1%
El Paso, TX339,120 jobs$2,500 – $4,550$3,550−6%
McAllen, TX296,700 jobs$2,550 – $4,600$3,550−5%

Cities with a workforce like Waco's

Big cities and small ones price differently, so here is Waco against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Olympia, WA130,300 jobs$3,400 – $6,200$4,800+28%
Kennewick, WA129,490 jobs$3,450 – $6,250$4,850+29%
Fayetteville, NC131,430 jobs$2,750 – $5,000$3,850+3%
Elkhart, IN127,730 jobs$3,050 – $5,500$4,300+14%

Extras that change the Waco total

Extras are quoted nationally and then scaled to Waco by the average of the local wage index (0.86) and goods index (0.94), a factor of 0.90. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Excavation and haul-away$270 – $1,350

Waco labor market for paver patio

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Waco is 0.86 times the national level.

Construction laborers (47-2061), 50% of the weighting: a median of $18.08 an hour, 20% below the US median of $22.66. The middle half of them earn between $16.60 and $20.65 an hour. About 1,220 work in the metro. That is 93.9 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.

Brickmasons and blockmasons (47-2021) carry 30% of the labor weighting. BLS does not publish this trade for the Waco metro, so we used the Texas statewide median: $27.12 an hour against $29.87 for the US. The middle half of them earn between $23.31 and $28.57 an hour.

For landscaping and groundskeeping workers (37-3011, weighted 20%) the local median is $17.43 an hour, which is 7% below the national $18.82. The middle half of them earn between $15.74 and $18.35 an hour. BLS counts 720 of them working in the area, 55.4 for every 10,000 jobs (US: 61.3), so the local bench is about average.

Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($20.65 an hour) instead of the median, the labor line grows by about $140. At the 25th percentile ($16.60) it shrinks by about $85. The total moves by 3.9% or 2.2%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 129,860 jobs in the Waco area. That makes it the 168th largest of the 300 metros we cover, with 0.08% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$16.60$18.08$20.65$22.660.80metro
Brickmasons and blockmasons (47-2021)30%$23.31$27.12$28.57$29.870.91state
Landscaping and groundskeeping workers (37-3011)20%$15.74$17.43$18.35$18.820.93metro
Blended100%0.86

Related projects, priced for Waco

Because every project leans on different trades, Waco's wage level does not move all prices equally. Against the US midpoint, retaining wall runs −10% and concrete driveway −17%.

Related projects with local prices
ProjectSizeRangevs. US
Concrete patio300 sq ft$1,100 – $3,400−14%
Stamped concrete400 sq ft$2,850 – $6,850−14%
Retaining wall200 sq ft of wall face$6,250 – $12,200−10%
Wood deck300 sq ft$6,550 – $13,200−13%
Concrete slab400 sq ft$2,100 – $4,550−13%
Concrete driveway600 sq ft$3,100 – $7,650−17%

Why two Waco quotes can differ

  • Paver material

    Pavers alone average $2-$4 per sq ft but the full range is $1-$15 depending on concrete, brick, or natural stone (HomeGuide).

  • Base prep

    The base (road base, fabric, edging, bedding and joint sand) is $1.40-$2.20 per sq ft of the materials number.

  • Excavation and grading

    Digging out is $1-$5 per sq ft; regrading a sloped yard is $0.40-$2.00 per sq ft.

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $3,300 to $4,200 for Waco, TX is attached.

Detailed paver patio report for Waco, TX, $9

The report lays out the paver patio numbers for Waco, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Paver patio in Waco: your questions

+How much does it cost to install a paver patio in Waco?

For 300 sq ft, expect $2,650 to $4,850 in the Waco area. A standard-spec job lands at $3,300 to $4,200. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for paver patio in Waco?

About $8.90 to $15 per sq ft for materials and labor, plus $0 to $320 for the permit if one is needed. The US range is $10 to $17.

+Is paver patio cheaper in Waco or Killeen?

Killeen is 40 miles away. The midpoint for 300 sq ft there is $3,750, which is 0% more than Waco ($3,750). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Waco?

About 58% at the midpoint, or $2,200 out of $3,750. Materials are 37% and permits 4%. Nationally, labor is 60%.

+What would 20x20 (400 sq ft) cost in Waco?

$3,550 to $6,350. Pick a different size in the estimator above to get your own number.

+Does paver patio need a permit in Waco?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $320 for fees in the Waco area (our national range of $0 to $350 scaled by the local price level).

+Is Waco expensive for paver patio compared with the rest of Texas?

Waco is 4% below the Texas statewide estimate ($3,900 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do construction laborers earn in Waco?

The BLS median is $18.08 an hour in the Waco area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.60 to $20.65.

+What do basic and premium paver patio work cost in Waco?

For 300 sq ft, basic work runs $2,650 to $3,550 and premium work $3,950 to $4,850. Basic means: basic concrete pavers, simple pattern, level yard. Premium means: natural stone or clay brick, complex pattern, slope or retaining edge.

+When is the best time to install a paver patio in Waco?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. January and February are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "excavation and haul-away" add in Waco?

$270 to $1,350 for 300 sq ft, from a national range scaled by the local wage and goods indexes.

Paver patio near Waco

Paver patio: all pricesPaver patio in TexasAll projects in WacoTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.