Skip to content
CostLocal

Kitchen cabinets cost in McAllen, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$3,650 – $11,200
Per linear ft
$129 – $396
before permit
Versus US midpoint
−19%
US $9,150
Rank of 300 metros
#299
1 = most expensive

McAllen homeowners pay roughly $3,650 to $11,200 to replace kitchen cabinets at 25 linear ft, or $129 to $396 per linear ft (permit not included). Against the US midpoint, McAllen is 19% lower. Carpenters earn a median of $19.97 an hour in the McAllen area, 31% below the US median of $29.12.

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in McAllen, TX, standard level

$5,900 to $8,950

About $209 to $316 per linear ft before permits. Labor is about 41% of the bill.

Cost breakdown
PartLowHigh
Materials$3,050$4,000
Labor$2,150$3,900
Permits and fees$690$1,050
Total$5,900$8,950
Save and get a PDF report

Cost breakdown for 25 linear ft in McAllen, TX

Part of the jobLowMidpointHighShare
Materials$2,350$3,500$4,70047%
Labor$870$3,050$5,20041%
Permits and fees$430$860$1,30012%
Total$3,650$7,400$11,200100%

Where the McAllen price comes from

Labor is 41% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In McAllen the blended ratio comes out at 0.70.

On the materials line, the BEA goods price index for the McAllen metro is 93.8 (US = 100). The midpoint materials bill for 25 linear ft comes to $3,500, compared with $3,750 at national prices. Permit and inspection fees are scaled by the broader index (85.9) and land at $430 to $1,300.

Why two McAllen quotes can differ

  • Removal

    Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

  • Stock, semi-custom or custom

    Stock cabinets run $100-$400 per linear foot installed, semi-custom $150-$700, and custom $500-$1,200 (HomeGuide).

Is McAllen cheap or dear? The local comparison

Same job, same size (25 linear ft), priced for the nearest metros. Austin is the priciest of the group at $8,250. Brownsville is the cheapest at $7,050.

Comparison with nearby areas
AreaRangeMidpointvs. here
McAllen, TXthis page$3,650 – $11,200$7,400
Brownsville, TX50 miles$3,550 – $10,600$7,050−5%
Corpus Christi, TX115 miles$3,800 – $12,200$8,000+8%
Laredo, TX120 miles$3,650 – $11,200$7,400level
San Antonio, TX210 miles$3,850 – $12,300$8,100+9%
Austin, TX270 miles$3,900 – $12,600$8,250+11%
Texas (statewide)$4,000 – $12,600$8,300+12%
United States$4,250 – $14,000$9,150+23%

Across 300 US metros, McAllen comes in at #299 from the top. The priciest is Honolulu, HI at $12,000; the cheapest is Brownsville, TX at $7,050 (midpoints, 25 linear ft). Statewide, McAllen is 11% below the Texas figure.

Other Texas metros

Texas metros compared with McAllen
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$4,150 – $12,900$8,550+15%
Houston, TX3,289,720 jobs$4,050 – $12,900$8,450+14%
Austin, TX1,293,690 jobs$3,900 – $12,600$8,250+11%
San Antonio, TX1,126,880 jobs$3,850 – $12,300$8,100+9%
El Paso, TX339,120 jobs$3,700 – $11,400$7,550+2%
Corpus Christi, TX192,580 jobs$3,800 – $12,200$8,000+8%

Cities with a workforce like McAllen's

Big cities and small ones price differently, so here is McAllen against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Syracuse, NY300,130 jobs$4,300 – $14,300$9,300+25%
Toledo, OH291,530 jobs$4,100 – $13,800$8,950+20%
Provo, UT304,660 jobs$4,000 – $13,000$8,500+14%
Stockton, CA289,660 jobs$4,550 – $15,300$9,950+34%

McAllen: what basic, standard and premium work costs

Three bands are cut from the same cited range and localized for McAllen wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$3,650 to $6,650

Stock cabinets, same layout

Standard

$5,900 to $8,950

Semi-custom with upgraded finishes

Premium

$8,150 to $11,200

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,350 – $4,300$3,800 – $5,750$5,300 – $7,250
10x10 kitchen (20 linear ft)$3,000 – $5,500$4,850 – $7,350$6,750 – $9,200
average kitchen (25 linear ft)$3,650 – $6,650$5,900 – $8,950$8,150 – $11,200
large kitchen (40 linear ft)$5,550 – $10,200$9,050 – $13,700$12,500 – $17,100

What nearby projects cost in McAllen

Because every project leans on different trades, McAllen's wage level does not move all prices equally. Against the US midpoint, kitchen remodel runs −11% and shower pan −16%.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$16,500 – $28,200−11%
Storm door1 door$290 – $810−16%
Front door1 door$400 – $2,200−13%
Bathroom remodel45 sq ft$3,950 – $19,700−16%
Shower pan1 pan$750 – $2,400−16%
Kitchen backsplash30 sq ft$260 – $1,350−11%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for McAllen is 0.70 times the national level.

For carpenters (47-2031, weighted 80%) the local median is $19.97 an hour, which is 31% below the national $29.12. The middle half of them earn between $17.40 and $21.94 an hour. BLS counts 310 of them working in the area, 10.4 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.

Electricians (47-2111), 10% of the weighting: a median of $22.56 an hour, 26% below the US median of $30.38. The middle half of them earn between $18.13 and $28.33 an hour. About 670 work in the metro. That is 22.6 per 10,000 jobs, compared with 48.7 nationally, so expect fewer local crews to bid.

For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $22.17 an hour, which is 28% below the national $30.67. The middle half of them earn between $18.38 and $27.04 an hour. BLS counts 360 of them working in the area, 12.1 for every 10,000 jobs (US: 30.0), so the local bench is thinner than average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($21.94 an hour) instead of the median, the labor line grows by about $240. At the 25th percentile ($17.40) it shrinks by about $310. The total moves by 3.2% or 4.2%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 296,700 jobs in the McAllen-Edinburg-Mission area. That makes it the 86th largest of the 300 metros we cover, with 0.19% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$17.40$19.97$21.94$29.120.69metro
Electricians (47-2111)10%$18.13$22.56$28.33$30.380.74metro
Plumbers, pipefitters and steamfitters (47-2152)10%$18.38$22.17$27.04$30.670.72metro
Blended100%0.70

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,900 to $8,950 for McAllen, TX is attached.

Detailed kitchen cabinets report for McAllen, TX, $9

The report lays out the kitchen cabinets numbers for McAllen, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in McAllen: your questions

+How much does it cost to replace kitchen cabinets in McAllen?

For 25 linear ft, expect $3,650 to $11,200 in the McAllen area. A standard-spec job lands at $5,900 to $8,950. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in McAllen?

About $129 to $396 per linear ft for materials and labor, plus $430 to $1,300 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in McAllen or Brownsville?

Brownsville is 50 miles away. The midpoint for 25 linear ft there is $7,050, which is 5% less than McAllen ($7,400). Wage and materials indexes both feed that gap.

+How much of the bill is labor in McAllen?

About 41% at the midpoint, or $3,050 out of $7,400. Materials are 47% and permits 12%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in McAllen?

$3,650 to $11,200. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in McAllen?

Often, but rules are set by your city or county building office, so call before you hire. Budget $430 to $1,300 for fees in the McAllen area (our national range of $500 to $1,500 scaled by the local price level).

+Is McAllen expensive for kitchen cabinets compared with the rest of Texas?

McAllen is 11% below the Texas statewide estimate ($8,300 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do carpenters earn in McAllen?

The BLS median is $19.97 an hour in the McAllen area, compared with $29.12 nationally. The 25th to 75th percentile range is $17.40 to $21.94.

+What do basic and premium kitchen cabinets work cost in McAllen?

For 25 linear ft, basic work runs $3,650 to $6,650 and premium work $8,150 to $11,200. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near McAllen

Kitchen cabinets: all pricesKitchen cabinets in TexasAll projects in McAllenTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.