Skip to content
CostLocal

Kitchen cabinets cost in Syracuse, NY

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (25 linear ft)
$4,300 – $14,300
Per linear ft
$152 – $514
before permit
Versus US midpoint
+2%
US $9,150
Rank of 300 metros
#78
1 = most expensive

If you want to replace kitchen cabinets in Syracuse, plan on $4,300 to $14,300 for 25 linear ft, all in. Per linear ft, that is $152 to $514 for materials and labor, with the permit on top. The local midpoint lands close to the national one. Carpenters earn a median of $29.93 an hour in the Syracuse area, 3% above the US median of $29.12.

Estimate your kitchen cabinets cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Semi-custom with upgraded finishes

Estimated cost for 25 linear ft in Syracuse, NY, standard level

$7,300 to $11,300

About $261 to $406 per linear ft before permits. Labor is about 49% of the bill.

Cost breakdown
PartLowHigh
Materials$3,250$4,250
Labor$3,300$5,900
Permits and fees$770$1,150
Total$7,300$11,300
Save and get a PDF report

Cost breakdown for 25 linear ft in Syracuse, NY

Part of the jobLowMidpointHighShare
Materials$2,500$3,750$5,00040%
Labor$1,300$4,600$7,85049%
Permits and fees$480$960$1,45010%
Total$4,300$9,300$14,300100%

Where the Syracuse price comes from

Labor is 49% of the midpoint bill here, against 48% nationally. The mix of trades behind this job is carpenters (80%), electricians (10%), plumbers, pipefitters and steamfitters (10%). We weight each trade's local median wage by that share and compare it with the national median. In Syracuse the blended ratio comes out at 1.05.

On the materials line, the BEA goods price index for the Syracuse metro is 99.7 (US = 100). The midpoint materials bill for 25 linear ft comes to $3,750, compared with $3,750 at national prices. Permit and inspection fees are scaled by the broader index (95.7) and land at $480 to $1,450.

Is Syracuse cheap or dear? The local comparison

Same job, same size (25 linear ft), priced for the nearest metros. Binghamton is the priciest of the group at $9,400. Utica is the cheapest at $9,050.

Comparison with nearby areas
AreaRangeMidpointvs. here
Syracuse, NYthis page$4,300 – $14,300$9,300
Utica, NY55 miles$4,200 – $13,900$9,050−3%
Binghamton, NY60 miles$4,300 – $14,500$9,400+1%
Rochester, NY70 miles$4,250 – $14,100$9,200−1%
Albany, NY115 miles$4,300 – $14,300$9,300level
Scranton, PA115 miles$4,250 – $13,900$9,100−2%
New York (statewide)$4,700 – $16,000$10,400+12%
United States$4,250 – $14,000$9,150−2%

Across 300 US metros, Syracuse comes in at #78 from the top. The priciest is Honolulu, HI at $12,000; the cheapest is Brownsville, TX at $7,050 (midpoints, 25 linear ft). Statewide, Syracuse is 10% below the New York figure.

Other New York metros

New York metros compared with Syracuse
MetroSizeRangeMidpointvs. here
New York, NY9,492,000 jobs$4,850 – $16,400$10,600+15%
Buffalo, NY534,550 jobs$4,300 – $14,500$9,400+1%
Rochester, NY494,280 jobs$4,250 – $14,100$9,200−1%
Albany, NY449,410 jobs$4,300 – $14,300$9,300level
Poughkeepsie, NY268,970 jobs$4,600 – $15,000$9,850+6%
Utica, NY118,390 jobs$4,200 – $13,900$9,050−3%

Cities with a workforce like Syracuse's

Big cities and small ones price differently, so here is Syracuse against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Provo, UT304,660 jobs$4,000 – $13,000$8,500−9%
McAllen, TX296,700 jobs$3,650 – $11,200$7,400−20%
Cape Coral, FL304,790 jobs$3,950 – $12,500$8,250−11%
Toledo, OH291,530 jobs$4,100 – $13,800$8,950−4%

Pick a size, pick a tier: kitchen cabinets pricing in Syracuse

Three bands are cut from the same cited range and localized for Syracuse wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$4,300 to $8,300

Stock cabinets, same layout

Standard

$7,300 to $11,300

Semi-custom with upgraded finishes

Premium

$10,300 to $14,300

Custom cabinetry, new layout

Cost by size and quality level
SizeBasicStandardPremium
small galley (15 linear ft)$2,750 – $5,300$4,700 – $7,250$6,600 – $9,150
10x10 kitchen (20 linear ft)$3,500 – $6,800$6,000 – $9,250$8,450 – $11,700
average kitchen (25 linear ft)$4,300 – $8,300$7,300 – $11,300$10,300 – $14,300
large kitchen (40 linear ft)$6,550 – $12,700$11,200 – $17,400$15,800 – $22,000

Specs and site conditions that change a Syracuse bid

  • Layout changes

    Keeping the plumbing and wiring where it is saves real money. Moving them brings in plumbers and electricians.

  • Removal

    Taking out the old cabinets is $300-$600, though many installers fold it into their labor price.

  • Permit

    Kitchen remodeling permits are $500-$1,500 where one is needed, usually when you change layout, plumbing or wiring.

What nearby projects cost in Syracuse

Because every project leans on different trades, Syracuse's wage level does not move all prices equally. Against the US midpoint, shower pan runs +3% and kitchen remodel +1%.

Related projects with local prices
ProjectSizeRangevs. US
Kitchen remodel120 sq ft$18,600 – $31,700+1%
Storm door1 door$360 – $960+1%
Front door1 door$510 – $2,500+1%
Bathroom remodel45 sq ft$4,800 – $23,900+2%
Shower pan1 pan$980 – $2,850+3%
Kitchen backsplash30 sq ft$310 – $1,550+3%

Syracuse labor market for kitchen cabinets

Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Syracuse is 1.05 times the national level.

For carpenters (47-2031, weighted 80%) the local median is $29.93 an hour, which is in line with the national $29.12. The middle half of them earn between $24.13 and $36.26 an hour. BLS counts 1,490 of them working in the area, 49.6 for every 10,000 jobs (US: 43.1), so the local bench is deeper than average.

Electricians (47-2111), 10% of the weighting: a median of $37.07 an hour, 22% above the US median of $30.38. The middle half of them earn between $28.37 and $49.07 an hour. About 1,160 work in the metro. That is 38.6 per 10,000 jobs, compared with 48.7 nationally, so expect fewer local crews to bid.

For plumbers, pipefitters and steamfitters (47-2152, weighted 10%) the local median is $32.23 an hour, which is 5% above the national $30.67. The middle half of them earn between $24.55 and $44.32 an hour. BLS counts 840 of them working in the area, 28.0 for every 10,000 jobs (US: 30.0), so the local bench is about average.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($36.26 an hour) instead of the median, the labor line grows by about $760. At the 25th percentile ($24.13) it shrinks by about $700. The total moves by 8.2% or 7.5%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 300,130 jobs in the Syracuse area. That makes it the 85th largest of the 300 metros we cover, with 0.19% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$24.13$29.93$36.26$29.121.03metro
Electricians (47-2111)10%$28.37$37.07$49.07$30.381.22metro
Plumbers, pipefitters and steamfitters (47-2152)10%$24.55$32.23$44.32$30.671.05metro
Blended100%1.05

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $7,300 to $11,300 for Syracuse, NY is attached.

A detailed PDF report of this estimate, $9

The report lays out the kitchen cabinets numbers for Syracuse, NY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Kitchen cabinets in Syracuse: your questions

+How much does it cost to replace kitchen cabinets in Syracuse?

For 25 linear ft, expect $4,300 to $14,300 in the Syracuse area. A standard-spec job lands at $7,300 to $11,300. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for kitchen cabinets in Syracuse?

About $152 to $514 per linear ft for materials and labor, plus $480 to $1,450 for the permit if one is needed. The US range is $150 to $500.

+Is kitchen cabinets cheaper in Syracuse or Utica?

Utica is 55 miles away. The midpoint for 25 linear ft there is $9,050, which is 3% less than Syracuse ($9,300). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Syracuse?

About 49% at the midpoint, or $4,600 out of $9,300. Materials are 40% and permits 10%. Nationally, labor is 48%.

+What would average kitchen (25 linear ft) cost in Syracuse?

$4,300 to $14,300. Pick a different size in the estimator above to get your own number.

+Does kitchen cabinets need a permit in Syracuse?

Often, but rules are set by your city or county building office, so call before you hire. Budget $480 to $1,450 for fees in the Syracuse area (our national range of $500 to $1,500 scaled by the local price level).

+Is Syracuse expensive for kitchen cabinets compared with the rest of New York?

Syracuse is 10% below the New York statewide estimate ($10,400 at the midpoint). We cover 9 metros in New York; see the state page to compare them.

+What do carpenters earn in Syracuse?

The BLS median is $29.93 an hour in the Syracuse area, compared with $29.12 nationally. The 25th to 75th percentile range is $24.13 to $36.26.

+What do basic and premium kitchen cabinets work cost in Syracuse?

For 25 linear ft, basic work runs $4,300 to $8,300 and premium work $10,300 to $14,300. Basic means: stock cabinets, same layout. Premium means: custom cabinetry, new layout.

Kitchen cabinets near Syracuse

Kitchen cabinets: all pricesKitchen cabinets in New YorkAll projects in SyracuseNew York cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's labor figure of $50-$300 per linear foot, matched low-to-low and high-to-high. Treat the split as a rough guide: labor swings with the cabinet type.