Skip to content
CostLocal

Attic insulation cost in Blacksburg, VA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$940 – $3,800
Per sq ft
$0.95 – $3.80
before permit
Versus US midpoint
−5%
US $2,500
Rank of 300 metros
#234
1 = most expensive

Attic insulation in Blacksburg, VA usually costs $940 to $3,800 for 1,000 sq ft. That works out to about $0.95 to $3.80 per sq ft before permits. Compared with the national midpoint that is $140 less. Insulation workers, floor, ceiling and wall earn a median of $21.54 an hour in the Blacksburg area, 9% below the US median of $23.62.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Blacksburg, VA, standard level

$1,800 to $2,950

About $1.80 to $2.95 per sq ft before permits. Labor is about 35% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$670$960
Permits and fees$0$0
Total$1,800$2,950
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Blacksburg, VA

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60065%
Labor$450$820$1,20035%
Permits and fees$0$0$00%
Total$940$2,350$3,800100%

Where the Blacksburg price comes from

The wage side of the estimate leans on insulation workers, floor, ceiling and wall, who do 80% of the hours on a typical job. Their local median is $21.54 an hour. Add the other trades involved and the blended wage index for Blacksburg is 0.91 (US = 1.00), which puts labor at 35% of the total. BLS does not publish this trade for the metro, so we used the Virginia statewide median.

Materials are scaled with BEA's regional price parity for goods. Blacksburg is at 96.8 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 92.7: $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Blacksburg. The wage table below marks each row.

What nearby projects cost in Blacksburg

Jobs that often go together with attic insulation are priced below at their usual sizes, using the same Blacksburg wage and price inputs. Compared with national midpoints, window replacement comes out highest (−4%) and vinyl siding lowest (−12%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,500 – $11,400−9%
Metal roof2,000 sq ft of roof$8,650 – $29,100−11%
Vinyl siding2,100 sq ft of wall$7,400 – $22,200−12%
Window replacement10 windows$4,300 – $14,400−4%
Gutters160 linear ft$1,100 – $3,750−11%

Is Blacksburg cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1,000 sq ft range from $2,250 to $2,400 across Blacksburg and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Blacksburg, VAthis page$940 – $3,800$2,350
Roanoke, VA35 miles$930 – $3,750$2,350−1%
Winston, NC75 miles$880 – $3,650$2,250−5%
Lynchburg, VA75 miles$880 – $3,650$2,250−5%
Greensboro, NC85 miles$950 – $3,800$2,400+1%
Charleston, WV95 miles$870 – $3,600$2,250−5%
Virginia (statewide)$960 – $3,900$2,450+3%
United States$1,000 – $4,000$2,500+6%

Out of the 300 metros we cover, Blacksburg ranks #234 for the cost of this job (#1 is the most expensive). Statewide, Blacksburg is 3% below the Virginia figure.

Elsewhere in Virginia

Virginia metros compared with Blacksburg
MetroSizeRangeMidpointvs. here
Virginia Beach, VA763,060 jobs$920 – $3,750$2,350−1%
Richmond, VA660,350 jobs$940 – $3,800$2,350level
Roanoke, VA153,980 jobs$930 – $3,750$2,350−1%
Charlottesville, VA114,780 jobs$940 – $3,800$2,400+1%
Lynchburg, VA97,190 jobs$880 – $3,650$2,250−5%
Winchester, VA67,740 jobs$940 – $3,800$2,350level

Metros of a similar size

Big cities and small ones price differently, so here is Blacksburg against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Sioux City, IA75,010 jobs$970 – $3,850$2,400+2%
Rapid City, SD73,820 jobs$950 – $3,800$2,350level
Abilene, TX75,070 jobs$950 – $3,750$2,350level
Kahului, HI73,750 jobs$1,150 – $4,500$2,800+19%

Why two Blacksburg quotes can differ

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

What local crews earn in Blacksburg

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Blacksburg the blend is 0.91.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the Blacksburg metro, so we used the Virginia statewide median: $21.54 an hour against $23.62 for the US. The middle half of them earn between $19.66 and $25.34 an hour.

For construction laborers (47-2061, weighted 20%) the local median is $20.03 an hour, which is 12% below the national $22.66. The middle half of them earn between $17.47 and $22.13 an hour.

A quick sensitivity check: moving the lead trade (insulation workers, floor, ceiling and wall) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $55. That is a swing of roughly 2.4% to 4.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Blacksburg-Christiansburg-Radford has 74,070 jobs in total (BLS, May 2025), ranking 248th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$19.66$21.54$25.34$23.620.91state
Construction laborers (47-2061)20%$17.47$20.03$22.13$22.660.88metro
Blended100%0.91

Blacksburg: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Blacksburg. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$940 to $2,100

Blown-in fiberglass or cellulose to code R-value

Standard

$1,800 to $2,950

Higher R-value with air sealing around fixtures

Premium

$2,650 to $3,800

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$560 – $1,250$1,100 – $1,750$1,600 – $2,250
average attic (1,000 sq ft)$940 – $2,100$1,800 – $2,950$2,650 – $3,800
large attic (1,800 sq ft)$1,700 – $3,750$3,250 – $5,300$4,750 – $6,800

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,800 to $2,950 for Blacksburg, VA is attached.

A detailed PDF report of this estimate, $9

The report lays out the attic insulation numbers for Blacksburg, VA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Blacksburg: your questions

+How much does it cost to insulate an attic in Blacksburg?

For 1,000 sq ft, expect $940 to $3,800 in the Blacksburg area. A standard-spec job lands at $1,800 to $2,950. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in Blacksburg?

About $0.95 to $3.80 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in Blacksburg or Roanoke?

Roanoke is 35 miles away. The midpoint for 1,000 sq ft there is $2,350, which is 1% less than Blacksburg ($2,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Blacksburg?

About 35% at the midpoint, or $820 out of $2,350. Materials are 65% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in Blacksburg?

$940 to $3,800. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in Blacksburg?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Blacksburg area (our national range of $0 to $0 scaled by the local price level).

+Is Blacksburg expensive for attic insulation compared with the rest of Virginia?

Blacksburg is 3% below the Virginia statewide estimate ($2,450 at the midpoint). We cover 8 metros in Virginia; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in Blacksburg?

BLS has no published metro figure here, so we use the statewide median of $21.54 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $19.66 to $25.34.

+What do basic and premium attic insulation work cost in Blacksburg?

For 1,000 sq ft, basic work runs $940 to $2,100 and premium work $2,650 to $3,800. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near Blacksburg

Attic insulation: all pricesAttic insulation in VirginiaAll projects in BlacksburgVirginia cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.