Skip to content
CostLocal

Attic insulation cost in Abilene, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$950 – $3,750
Per sq ft
$0.95 – $3.75
before permit
Versus US midpoint
−6%
US $2,500
Rank of 300 metros
#240
1 = most expensive

Abilene homeowners pay roughly $950 to $3,750 to insulate an attic at 1,000 sq ft, or $0.95 to $3.75 per sq ft (permit not included). Against the US midpoint, Abilene is 6% lower. Building materials run about 6% below the US average here (BEA goods price index 93.8).

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in Abilene, TX, standard level

$1,800 to $2,950

About $1.80 to $2.95 per sq ft before permits. Labor is about 36% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,900
Labor$710$1,000
Permits and fees$0$0
Total$1,800$2,950
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Abilene, TX

Part of the jobLowMidpointHighShare
Materials$470$1,500$2,55064%
Labor$480$860$1,25036%
Permits and fees$0$0$00%
Total$950$2,350$3,750100%

Why Abilene prices look the way they do

We price the labor side from BLS wage data for 2 trades: insulation workers, floor, ceiling and wall at 80%, construction laborers at 20%. Weighted together, Abilene wages are 0.96 times the national level. Labor makes up about 36% of the midpoint estimate (36% at national prices). BLS does not publish this trade for the metro, so we used the Texas statewide median.

On the materials line, the BEA goods price index for the Abilene metro is 93.8 (US = 100). The midpoint materials bill for 1,000 sq ft comes to $1,500, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (90.4) and land at $0 to $0.

Data note: 80% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Abilene. The wage table below marks each row.

Pick a size, pick a tier: attic insulation pricing in Abilene

Three bands are cut from the same cited range and localized for Abilene wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.

Basic

$950 to $2,100

Blown-in fiberglass or cellulose to code R-value

Standard

$1,800 to $2,950

Higher R-value with air sealing around fixtures

Premium

$2,650 to $3,750

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$570 – $1,250$1,100 – $1,750$1,600 – $2,250
average attic (1,000 sq ft)$950 – $2,100$1,800 – $2,950$2,650 – $3,750
large attic (1,800 sq ft)$1,700 – $3,750$3,250 – $5,250$4,750 – $6,800

Is Abilene cheap or dear? The local comparison

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 1,000 sq ft range from $2,300 to $2,550 across Abilene and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Abilene, TXthis page$950 – $3,750$2,350
Midland, TX135 miles$950 – $3,800$2,350level
Killeen, TX140 miles$950 – $3,750$2,350level
Lubbock, TX145 miles$900 – $3,650$2,300−3%
Waco, TX155 miles$950 – $3,750$2,350level
Dallas, TX160 miles$1,000 – $4,100$2,550+8%
Texas (statewide)$970 – $3,900$2,450+3%
United States$1,000 – $4,000$2,500+6%

Across 300 US metros, Abilene comes in at #240 from the top. The priciest is San Francisco, CA at $3,150; the cheapest is Morgantown, WV at $2,250 (midpoints, 1,000 sq ft). Statewide, Abilene is 3% below the Texas figure.

Other Texas metros

Texas metros compared with Abilene
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$1,000 – $4,100$2,550+8%
Houston, TX3,289,720 jobs$980 – $3,950$2,450+5%
Austin, TX1,293,690 jobs$960 – $3,800$2,400+1%
San Antonio, TX1,126,880 jobs$940 – $3,750$2,350−1%
El Paso, TX339,120 jobs$940 – $3,750$2,350level
McAllen, TX296,700 jobs$940 – $3,750$2,350−1%

Cities with a workforce like Abilene's

Big cities and small ones price differently, so here is Abilene against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Kenosha, WI75,450 jobs$1,050 – $4,200$2,600+11%
Sioux City, IA75,010 jobs$970 – $3,850$2,400+2%
Warner Robins, GA76,050 jobs$950 – $3,850$2,400+1%
Blacksburg, VA74,070 jobs$940 – $3,800$2,350level

Planning more than one job in Abilene?

Because every project leans on different trades, Abilene's wage level does not move all prices equally. Against the US midpoint, window replacement runs −10% and vinyl siding −16%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$5,250 – $10,900−13%
Metal roof2,000 sq ft of roof$8,450 – $28,300−14%
Vinyl siding2,100 sq ft of wall$7,050 – $21,100−16%
Window replacement10 windows$4,000 – $13,500−10%
Gutters160 linear ft$1,100 – $3,700−13%

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Abilene is 0.96 times the national level.

Insulation workers, floor, ceiling and wall (47-2131) carry 80% of the labor weighting. BLS does not publish this trade for the Abilene metro, so we used the Texas statewide median: $23.43 an hour against $23.62 for the US. The middle half of them earn between $19.55 and $27.06 an hour.

Construction laborers (47-2061), 20% of the weighting: a median of $18.35 an hour, 19% below the US median of $22.66. The middle half of them earn between $16.82 and $22.01 an hour. About 570 work in the metro. That is 75.9 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

Quotes come from real crews, not medians. If the insulation workers, floor, ceiling and wall on your job are paid at the 75th percentile ($27.06 an hour) instead of the median, the labor line grows by about $110. At the 25th percentile ($19.55) it shrinks by about $120. The total moves by 4.7% or 5.0%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 75,070 jobs in the Abilene area. That makes it the 246th largest of the 300 metros we cover, with 0.05% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$19.55$23.43$27.06$23.620.99state
Construction laborers (47-2061)20%$16.82$18.35$22.01$22.660.81metro
Blended100%0.96

Attic insulation: what moves the price in Abilene

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,800 to $2,950 for Abilene, TX is attached.

Detailed attic insulation report for Abilene, TX, $9

The report lays out the attic insulation numbers for Abilene, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in Abilene: your questions

+How much does it cost to insulate an attic in Abilene?

For 1,000 sq ft, expect $950 to $3,750 in the Abilene area. A standard-spec job lands at $1,800 to $2,950. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for attic insulation in Abilene?

About $0.95 to $3.75 per sq ft for materials and labor, plus $0 to $0 for the permit if one is needed. The US range is $1 to $4.

+Is attic insulation cheaper in Abilene or Midland?

Midland is 135 miles away. The midpoint for 1,000 sq ft there is $2,350, which is 0% more than Abilene ($2,350). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Abilene?

About 36% at the midpoint, or $860 out of $2,350. Materials are 64% and permits 0%. Nationally, labor is 36%.

+What would average attic (1,000 sq ft) cost in Abilene?

$950 to $3,750. Pick a different size in the estimator above to get your own number.

+Does attic insulation need a permit in Abilene?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $0 for fees in the Abilene area (our national range of $0 to $0 scaled by the local price level).

+Is Abilene expensive for attic insulation compared with the rest of Texas?

Abilene is 3% below the Texas statewide estimate ($2,450 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do insulation workers, floor, ceiling and wall earn in Abilene?

BLS has no published metro figure here, so we use the statewide median of $23.43 an hour, compared with $23.62 nationally. The 25th to 75th percentile range is $19.55 to $27.06.

+What do basic and premium attic insulation work cost in Abilene?

For 1,000 sq ft, basic work runs $950 to $2,100 and premium work $2,650 to $3,750. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation near Abilene

Attic insulation: all pricesAttic insulation in TexasAll projects in AbileneTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.