Metal roof cost in Blacksburg, VA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (2,000 sq ft of roof)
- $8,650 – $29,100
- Per sq ft of roof
- $4.25 – $14.50
- before permit
- Versus US midpoint
- −11%
- US $21,300
- Rank of 300 metros
- #250
- 1 = most expensive
Local price for a metal roof in the Blacksburg area: $8,650 to $29,100 for 2,000 sq ft of roof. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Roofers earn a median of $23.28 an hour in the Blacksburg area, 13% below the US median of $26.65.
Estimate your metal roof cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 2,000 sq ft of roof in Blacksburg, VA, standard level
$14,800 to $23,000
About $7.30 to $11.50 per sq ft of roof before permits. Labor is about 52% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,000 | $11,400 |
| Labor | $8,550 | $11,200 |
| Permits and fees | $240 | $370 |
| Total | $14,800 | $23,000 |
Cost breakdown for 2,000 sq ft of roof in Blacksburg, VA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $8,700 | $15,500 | 46% |
| Labor | $6,600 | $9,850 | $13,200 | 52% |
| Permits and fees | $140 | $300 | $460 | 2% |
| Total | $8,650 | $18,900 | $29,100 | 100% |
Why Blacksburg prices look the way they do
Labor is 52% of the midpoint bill here, against 56% nationally. The mix of trades behind this job is roofers (70%), sheet metal workers (20%), construction laborers (10%). We weight each trade's local median wage by that share and compare it with the national median. In Blacksburg the blended ratio comes out at 0.82. BLS does not publish this trade for the metro, so we used the Virginia statewide median.
Materials are scaled with BEA's regional price parity for goods. Blacksburg is at 96.8 against 100 for the US, so a materials line of $9,000 nationally becomes $8,700 here (midpoint, 2,000 sq ft of roof). Permits follow the all-items index of 92.7: $140 to $460.
Data note: 70% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Blacksburg. The wage table below marks each row.
Is Blacksburg cheap or dear? The local comparison
Of the five closest metros, 2 are cheaper than Blacksburg. Roanoke is the lowest at about $18,800 (midpoint, 2,000 sq ft of roof), 35 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Blacksburg, VAthis page | $8,650 – $29,100 | $18,900 | |
| Roanoke, VA35 miles | $8,600 – $29,000 | $18,800 | level |
| Winston, NC75 miles | $9,000 – $29,700 | $19,400 | +3% |
| Lynchburg, VA75 miles | $8,600 – $29,000 | $18,800 | level |
| Greensboro, NC85 miles | $9,150 – $30,100 | $19,600 | +4% |
| Charleston, WV95 miles | $9,800 – $31,300 | $20,600 | +9% |
| Virginia (statewide) | $9,150 – $30,500 | $19,800 | +5% |
| United States | $10,200 – $32,500 | $21,300 | +13% |
Out of the 300 metros we cover, Blacksburg ranks #250 for the cost of this job (#1 is the most expensive). Statewide, Blacksburg is 5% below the Virginia figure.
Elsewhere in Virginia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Virginia Beach, VA | 763,060 jobs | $9,050 – $30,000 | $19,500 | +3% |
| Richmond, VA | 660,350 jobs | $8,900 – $29,600 | $19,300 | +2% |
| Roanoke, VA | 153,980 jobs | $8,600 – $29,000 | $18,800 | level |
| Charlottesville, VA | 114,780 jobs | $8,950 – $29,700 | $19,300 | +2% |
| Lynchburg, VA | 97,190 jobs | $8,600 – $29,000 | $18,800 | level |
| Winchester, VA | 67,740 jobs | $8,550 – $28,900 | $18,800 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Blacksburg against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Sioux City, IA | 75,010 jobs | $9,350 – $30,100 | $19,700 | +4% |
| Rapid City, SD | 73,820 jobs | $8,650 – $29,000 | $18,800 | level |
| Abilene, TX | 75,070 jobs | $8,450 – $28,300 | $18,400 | −3% |
| Kahului, HI | 73,750 jobs | $12,400 – $38,500 | $25,500 | +35% |
The best months for metal roof in Blacksburg
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Blacksburg Nwso (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Blacksburg are February through December: 11 of 12. Outside them, January has an average daytime high under 45°F.
In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Blacksburg gets about 43 inches of precipitation in a normal year, including roughly 25 inches of snow. The wettest months are May, June and July (4.5 inches in May). Inside the workable window, February and November are the driest, at 2.8 and 2.9 inches. The station averages about 5 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 42 | 22 | 3.2 | Cold |
| Feb | 45 | 24 | 2.8 | Workable |
| Mar | 53 | 30 | 3.8 | Workable |
| Apr | 64 | 39 | 3.8 | Workable |
| May | 72 | 48 | 4.5 | Workable |
| Jun | 79 | 57 | 4.3 | Workable |
| Jul | 82 | 61 | 4.2 | Workable |
| Aug | 81 | 60 | 3.6 | Workable |
| Sep | 76 | 53 | 3.5 | Workable |
| Oct | 66 | 41 | 2.9 | Workable |
| Nov | 55 | 31 | 2.9 | Workable |
| Dec | 45 | 25 | 3.3 | Workable |
Pick a size, pick a tier: metal roof pricing in Blacksburg
The cited range is split into basic, standard and premium bands, then scaled to Blacksburg. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small (1,200 sq ft of roof) to large (2,800 sq ft of roof).
Basic
$8,650 to $16,800
Corrugated or exposed-fastener steel panels
Standard
$14,800 to $23,000
Standing seam steel
Premium
$20,900 to $29,100
Aluminum or premium finish, complex roof
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small (1,200 sq ft of roof) | $5,250 – $10,200 | $8,950 – $13,900 | $12,700 – $17,600 |
| average (2,000 sq ft of roof) | $8,650 – $16,800 | $14,800 – $23,000 | $20,900 – $29,100 |
| large (2,800 sq ft of roof) | $12,100 – $23,500 | $20,600 – $32,000 | $29,200 – $40,600 |
Who does the work: Blacksburg trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Blacksburg the blend is 0.82.
Roofers (47-2181) carry 70% of the labor weighting. BLS does not publish this trade for the Blacksburg metro, so we used the Virginia statewide median: $23.28 an hour against $26.65 for the US. The middle half of them earn between $22.00 and $27.69 an hour.
Sheet metal workers (47-2211), 20% of the weighting: a median of $18.16 an hour, 39% below the US median of $29.71. The middle half of them earn between $17.95 and $21.20 an hour. About 40 work in the metro. That is 5.4 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 10%) the local median is $20.03 an hour, which is 12% below the national $22.66. The middle half of them earn between $17.47 and $22.13 an hour.
A quick sensitivity check: moving the lead trade (roofers) from the median to the 75th percentile wage adds about $1,400 to the midpoint estimate; the 25th percentile takes off about $400. That is a swing of roughly 2.1% to 7.4% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Blacksburg-Christiansburg-Radford has 74,070 jobs in total (BLS, May 2025), ranking 248th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Roofers (47-2181) | 70% | $22.00 | $23.28 | $27.69 | $26.65 | 0.87 | state |
| Sheet metal workers (47-2211) | 20% | $17.95 | $18.16 | $21.20 | $29.71 | 0.61 | metro |
| Construction laborers (47-2061) | 10% | $17.47 | $20.03 | $22.13 | $22.66 | 0.88 | metro |
| Blended | 100% | 0.82 | |||||
Related projects, priced for Blacksburg
Jobs that often go together with metal roof are priced below at their usual sizes, using the same Blacksburg wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−5%) and vinyl siding lowest (−12%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,500 – $11,400 | −9% |
| Gutters | 160 linear ft | $1,100 – $3,750 | −11% |
| Attic insulation | 1,000 sq ft | $940 – $3,800 | −5% |
| Vinyl siding | 2,100 sq ft of wall | $7,400 – $22,200 | −12% |
Specs and site conditions that change a Blacksburg bid
Labor
Metal roof labor is $4-$8 per sq ft, or $400-$800 per roofing square, and standing seam needs specialist crews.
Other metals
Tin runs $600-$1,800 per roofing square (100 sq ft) installed and aluminum $700-$1,700 per square (HomeGuide).
Panel type
Corrugated sheet metal is $5-$12 per sq ft installed; standing seam is $9-$16 (HomeGuide).
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $14,800 to $23,000 for Blacksburg, VA is attached.
A detailed PDF report of this estimate, $9
The report lays out the metal roof numbers for Blacksburg, VA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Metal roof in Blacksburg: your questions
+How much does it cost to install a metal roof in Blacksburg?
For 2,000 sq ft of roof, expect $8,650 to $29,100 in the Blacksburg area. A standard-spec job lands at $14,800 to $23,000. Small jobs usually cost more per sq ft of roof and large ones less.
+What is the price per sq ft of roof for metal roof in Blacksburg?
About $4.25 to $14.50 per sq ft of roof for materials and labor, plus $140 to $460 for the permit if one is needed. The US range is $5 to $16.
+Is metal roof cheaper in Blacksburg or Roanoke?
Roanoke is 35 miles away. The midpoint for 2,000 sq ft of roof there is $18,800, which is 0% less than Blacksburg ($18,900). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Blacksburg?
About 52% at the midpoint, or $9,850 out of $18,900. Materials are 46% and permits 2%. Nationally, labor is 56%.
+What would average (2,000 sq ft of roof) cost in Blacksburg?
$8,650 to $29,100. Pick a different size in the estimator above to get your own number.
+Does metal roof need a permit in Blacksburg?
Often, but rules are set by your city or county building office, so call before you hire. Budget $140 to $460 for fees in the Blacksburg area (our national range of $150 to $500 scaled by the local price level).
+Is Blacksburg expensive for metal roof compared with the rest of Virginia?
Blacksburg is 5% below the Virginia statewide estimate ($19,800 at the midpoint). We cover 8 metros in Virginia; see the state page to compare them.
+What do roofers earn in Blacksburg?
BLS has no published metro figure here, so we use the statewide median of $23.28 an hour, compared with $26.65 nationally. The 25th to 75th percentile range is $22.00 to $27.69.
+What do basic and premium metal roof work cost in Blacksburg?
For 2,000 sq ft of roof, basic work runs $8,650 to $16,800 and premium work $20,900 to $29,100. Basic means: corrugated or exposed-fastener steel panels. Premium means: aluminum or premium finish, complex roof.
+When is the best time to install a metal roof in Blacksburg?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Metal roof near Blacksburg
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Metal Roof Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $4-$8/sq ft labor range for metal roofs.