Gutters cost in North Dakota
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (160 linear ft)
- $1,300 – $4,150
- Per linear ft
- $8.05 – $25
- before permit
- Versus US midpoint
- −1%
- US $2,750
- Metros covered
- 2
North Dakota prices for gutters: $1,300 to $4,150 for 160 linear ft, or $8.05 to $25 per linear ft without the permit. The state midpoint is 1% below the national one. Local wages for sheet metal workers are $31.34 an hour.
Inside North Dakota, the metros we cover range from $2,650 (Bismarck) to $2,850 (Fargo) at the midpoint.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in North Dakota (statewide), standard level
$2,150 to $3,300
About $13 to $20 per linear ft before permits. Labor is about 40% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $930 | $1,250 |
| Permits and fees | $55 | $120 |
| Total | $2,150 | $3,300 |
Cost breakdown for 160 linear ft in North Dakota
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $610 | $1,550 | $2,450 | 56% |
| Labor | $680 | $1,100 | $1,500 | 40% |
| Permits and fees | $0 | $90 | $180 | 3% |
| Total | $1,300 | $2,700 | $4,150 | 100% |
North Dakota versus the states around it
North Dakota ranks 20 of 51 (the 50 states plus DC) for gutters, where 1 is the most expensive. The costliest is Hawaii at $3,400 and the cheapest Arkansas at $2,400, both for 160 linear ft at the midpoint. North Dakota sits at $2,700. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| South Dakota | 220 miles away | $1,150 – $3,850 | $2,500 | −8% |
| Minnesota | 270 miles away | $1,450 – $4,600 | $3,000 | +11% |
| Nebraska | 410 miles away | $1,200 – $4,000 | $2,600 | −4% |
| Iowa | 450 miles away | $1,250 – $4,000 | $2,650 | −3% |
| Wyoming | 500 miles away | $1,200 – $3,950 | $2,600 | −5% |
If you are planning more than one job in North Dakota
Each project weights the trades differently, so North Dakota's wage level does not push every price by the same amount. Compared with the US midpoint, roof replacement is +3% and attic insulation −4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,350 – $12,700 | +3% |
| Metal roof | 2,000 sq ft of roof | $10,600 – $32,900 | +2% |
| Vinyl siding | 2,100 sq ft of wall | $8,200 – $24,500 | −3% |
| French drain | 60 linear ft | $600 – $2,100 | −1% |
| Attic insulation | 1,000 sq ft | $960 – $3,850 | −4% |
North Dakota metro-by-metro prices
1 of the 2 metros sit above the statewide midpoint of $2,700, and the top-to-bottom gap is 6%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (160 linear ft) | Midpoint | vs. state |
|---|---|---|---|
| Fargo, ND | $1,350 – $4,300 | $2,850 | +4% |
| Bismarck, ND | $1,250 – $4,100 | $2,650 | −2% |
North Dakota seasons and gutters
Weather decides when exterior installation can happen, and North Dakota is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.
Every North Dakota metro on the list has 7 comfortable months, though rainfall ranges from 19 inches a year in Bismarck to 24 in Fargo.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Fargo | 0 | 82 | 24 | 7: April through October |
| Bismarck | 2 | 85 | 19 | 7: April through October |
Wages behind the North Dakota number
North Dakota's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.06 times the national level.
Sheet metal workers (47-2211), 40% of the weighting: a median of $31.34 an hour, 5% above the US median of $29.71. The middle half of them earn between $23.51 and $38.91 an hour. About 290 work in the state. That is 6.8 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
Roofers (47-2181), 30% of the weighting: a median of $28.72 an hour, 8% above the US median of $26.65. The middle half of them earn between $23.08 and $34.68 an hour. About 290 work in the state. That is 6.8 per 10,000 jobs, compared with 8.7 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $23.59 an hour, which is 4% above the national $22.66. The middle half of them earn between $21.96 and $29.17 an hour. BLS counts 5,050 of them working in the state, 117.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A crew paid at the 75th percentile for sheet metal workers ($38.91 an hour) would add about $110 to the statewide midpoint; one at the 25th percentile ($23.51) would take off about $110. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 429,430 jobs across North Dakota (May 2025), which is 0.3% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $23.51 | $31.34 | $38.91 | $29.71 | 1.05 | state |
| Roofers (47-2181) | 30% | $23.08 | $28.72 | $34.68 | $26.65 | 1.08 | state |
| Construction laborers (47-2061) | 30% | $21.96 | $23.59 | $29.17 | $22.66 | 1.04 | state |
| Blended | 100% | 1.06 | |||||
Basic, standard or premium: North Dakota prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,300 to $2,450
Vinyl or sectional aluminum, single story
Standard
$2,150 to $3,300
Seamless aluminum K-style, standard downspouts
Premium
$3,000 to $4,150
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $970 – $1,850 | $1,600 – $2,500 | $2,300 – $3,150 |
| average house (160 linear ft) | $1,300 – $2,450 | $2,150 – $3,300 | $3,000 – $4,150 |
| large house (240 linear ft) | $1,950 – $3,600 | $3,200 – $4,900 | $4,450 – $6,150 |
Why two North Dakota quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,150 to $3,300 for North Dakota is attached.
Take this estimate with you: PDF report, $9
The report lays out the gutters numbers for North Dakota line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in North Dakota: your questions
+How much does it cost to install gutters in North Dakota?
$1,300 to $4,150 for 160 linear ft, using statewide wages and prices. Metro areas inside North Dakota can sit above or below that.
+Which city in North Dakota is cheapest for gutters?
Bismarck at about $2,650 (midpoint, 160 linear ft). The priciest is Fargo at $2,850.
+Is gutters cheaper in North Dakota than the US average?
It is 1% cheaper: $2,700 against $2,750 for 160 linear ft at the midpoint.
+What share of the price is labor in North Dakota?
About 40% ($1,100). Materials are 56%. Statewide labor for this job is weighted 1.06x the national wage level.
+What do sheet metal workers earn in North Dakota?
The BLS statewide median is $31.34 an hour, against $29.71 for the US. The 25th to 75th percentile range is $23.51 to $38.91.
+Where does North Dakota rank for gutters costs?
20th most expensive of 51 (the 50 states plus DC) at the midpoint, $2,700 for 160 linear ft. Rank 1 is the costliest.
+What do basic and premium gutters work cost in North Dakota?
For 160 linear ft, basic work runs $1,300 to $2,450 and premium work $3,000 to $4,150. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+Does the season matter for gutters in North Dakota?
Yes where winters or summers are hard. Of the North Dakota metros we cover, Fargo has the most comfortable months (7 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
Gutters by city in North Dakota
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.