Skip to content
CostLocal

Attic insulation cost in North Dakota

Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.

Statewide range (1,000 sq ft)
$960 – $3,850
Per sq ft
$0.95 – $3.85
before permit
Versus US midpoint
−4%
US $2,500
Metros covered
2

What does it cost to insulate an attic in North Dakota? Plan on $960 to $3,850 for 1,000 sq ft. Wages (0.96x the US blend), materials (price index 95.7) and permit costs (89.0) put the state below the national midpoint by 4%.

Inside North Dakota, the metros we cover range from $2,400 (Fargo) to $2,400 (Bismarck) at the midpoint.

Estimate your attic insulation cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Higher R-value with air sealing around fixtures

Estimated cost for 1,000 sq ft in North Dakota (statewide), standard level

$1,800 to $2,950

About $1.80 to $2.95 per sq ft before permits. Labor is about 36% of the bill.

Cost breakdown
PartLowHigh
Materials$1,100$1,950
Labor$710$1,000
Permits and fees$0$0
Total$1,800$2,950
Save and get a PDF report

Cost breakdown for 1,000 sq ft in North Dakota

Part of the jobLowMidpointHighShare
Materials$480$1,550$2,60064%
Labor$480$870$1,25036%
Permits and fees$0$0$00%
Total$960$2,400$3,850100%

Basic, standard or premium: North Dakota prices

Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from small attic (600 sq ft) to large attic (1,800 sq ft).

Basic

$960 to $2,100

Blown-in fiberglass or cellulose to code R-value

Standard

$1,800 to $2,950

Higher R-value with air sealing around fixtures

Premium

$2,700 to $3,850

Spray foam or heavy air sealing, hard-to-reach attic

Cost by size and quality level
SizeBasicStandardPremium
small attic (600 sq ft)$580 – $1,250$1,100 – $1,800$1,600 – $2,300
average attic (1,000 sq ft)$960 – $2,100$1,800 – $2,950$2,700 – $3,850
large attic (1,800 sq ft)$1,750 – $3,800$3,300 – $5,350$4,850 – $6,900

North Dakota labor market for attic insulation

North Dakota's labor line is priced from 2 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 0.96 times the national level.

For insulation workers, floor, ceiling and wall (47-2131, weighted 80%) the local median is $22.33 an hour, which is 5% below the national $23.62. The middle half of them earn between $21.15 and $27.33 an hour. BLS counts 260 of them working in the state, 6.1 for every 10,000 jobs (US: 2.9), so the local bench is deeper than average.

For construction laborers (47-2061, weighted 20%) the local median is $23.59 an hour, which is 4% above the national $22.66. The middle half of them earn between $21.96 and $29.17 an hour. BLS counts 5,050 of them working in the state, 117.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

A crew paid at the 75th percentile for insulation workers, floor, ceiling and wall ($27.33 an hour) would add about $150 to the statewide midpoint; one at the 25th percentile ($21.15) would take off about $35. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.

BLS counts 429,430 jobs across North Dakota (May 2025), which is 0.3% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Insulation workers, floor, ceiling and wall (47-2131)80%$21.15$22.33$27.33$23.620.95state
Construction laborers (47-2061)20%$21.96$23.59$29.17$22.661.04state
Blended100%0.96

Attic insulation cost by metro in North Dakota

0 of the 2 metros sit above the statewide midpoint of $2,400, and the top-to-bottom gap is 0%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.

MetroRange (1,000 sq ft)Midpointvs. state
Bismarck, ND$960 – $3,850$2,400level
Fargo, ND$960 – $3,850$2,400level

If you are planning more than one job in North Dakota

Each project weights the trades differently, so North Dakota's wage level does not push every price by the same amount. Compared with the US midpoint, roof replacement is +3% and vinyl siding −3%.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,350 – $12,700+3%
Metal roof2,000 sq ft of roof$10,600 – $32,900+2%
Vinyl siding2,100 sq ft of wall$8,200 – $24,500−3%
Window replacement10 windows$4,400 – $14,600−2%
Gutters160 linear ft$1,300 – $4,150−1%

North Dakota versus the states around it

North Dakota ranks 38 of 51 (the 50 states plus DC) for attic insulation, where 1 is the most expensive. The costliest is Washington at $2,900 and the cheapest West Virginia at $2,250, both for 1,000 sq ft at the midpoint. North Dakota sits at $2,400. The five states closest by workforce center are listed below.

States near North Dakota, same project and size
StateDistanceRangeMidpointvs. here
South Dakota220 miles away$950 – $3,800$2,350−1%
Minnesota270 miles away$1,050 – $4,200$2,650+10%
Nebraska410 miles away$1,150 – $4,350$2,750+15%
Iowa450 miles away$1,050 – $4,000$2,500+4%
Wyoming500 miles away$950 – $3,800$2,400−1%

Why two North Dakota quotes can differ

  • Type of insulation

    Blown-in is $0.90-$2.40 per sq ft and loose-fill is $1.00-$2.50 installed; spray foam costs more (HomeGuide).

  • Job size

    Small attics start around $500 and large ones go up to $6,000 (HomeGuide).

  • Air sealing and fixture damming

    Sealing gaps and damming around recessed lights are part of what moves the price within a type.

  • Removing old insulation

    Old, wet or pest-damaged insulation has to come out first, at extra cost.

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $1,800 to $2,950 for North Dakota is attached.

Detailed attic insulation report for North Dakota, $9

The report lays out the attic insulation numbers for North Dakota line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Attic insulation in North Dakota: your questions

+How much does it cost to insulate an attic in North Dakota?

$960 to $3,850 for 1,000 sq ft, using statewide wages and prices. Metro areas inside North Dakota can sit above or below that.

+Which city in North Dakota is cheapest for attic insulation?

Fargo at about $2,400 (midpoint, 1,000 sq ft). The priciest is Bismarck at $2,400.

+Is attic insulation cheaper in North Dakota than the US average?

It is 4% cheaper: $2,400 against $2,500 for 1,000 sq ft at the midpoint.

+What share of the price is labor in North Dakota?

About 36% ($870). Materials are 64%. Statewide labor for this job is weighted 0.96x the national wage level.

+What do insulation workers, floor, ceiling and wall earn in North Dakota?

The BLS statewide median is $22.33 an hour, against $23.62 for the US. The 25th to 75th percentile range is $21.15 to $27.33.

+Where does North Dakota rank for attic insulation costs?

38th most expensive of 51 (the 50 states plus DC) at the midpoint, $2,400 for 1,000 sq ft. Rank 1 is the costliest.

+What do basic and premium attic insulation work cost in North Dakota?

For 1,000 sq ft, basic work runs $960 to $2,100 and premium work $2,700 to $3,850. Basic means: blown-in fiberglass or cellulose to code R-value. Premium means: spray foam or heavy air sealing, hard-to-reach attic.

Attic insulation by city in North Dakota

Attic insulation: all pricesNorth Dakota cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed price minus HomeGuide's $0.50-$1.30 per sq ft insulation labor, matched low-to-low and high-to-high.