Gutters cost in Raleigh, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,200 – $3,950
- Per linear ft
- $7.45 – $23.50
- before permit
- Versus US midpoint
- −6%
- US $2,750
- Rank of 300 metros
- #178
- 1 = most expensive
Local price for new gutters in the Raleigh area: $1,200 to $3,950 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 6% lower than the US figure. Sheet metal workers earn a median of $24.31 an hour in the Raleigh area, 18% below the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Raleigh, NC, standard level
$2,000 to $3,150
About $12.50 to $18.50 per linear ft before permits. Labor is about 36% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $790 | $1,050 |
| Permits and fees | $60 | $140 |
| Total | $2,000 | $3,150 |
Cost breakdown for 160 linear ft in Raleigh, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 60% |
| Labor | $570 | $930 | $1,300 | 36% |
| Permits and fees | $0 | $100 | $200 | 4% |
| Total | $1,200 | $2,550 | $3,950 | 100% |
Why Raleigh prices look the way they do
Labor is 36% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Raleigh the blended ratio comes out at 0.89.
Materials are scaled with BEA's regional price parity for goods. Raleigh is at 96.6 against 100 for the US, so a materials line of $1,600 nationally becomes $1,550 here (midpoint, 160 linear ft). Permits follow the all-items index of 98.2: $0 to $200.
Planning more than one job in Raleigh?
Jobs that often go together with gutters are priced below at their usual sizes, using the same Raleigh wage and price inputs. Compared with national midpoints, attic insulation comes out highest (−4%) and vinyl siding lowest (−8%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,700 – $11,800 | −6% |
| Metal roof | 2,000 sq ft of roof | $9,300 – $30,400 | −7% |
| Vinyl siding | 2,100 sq ft of wall | $7,750 – $23,200 | −8% |
| French drain | 60 linear ft | $570 – $2,000 | −5% |
| Attic insulation | 1,000 sq ft | $950 – $3,850 | −4% |
Raleigh: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Raleigh. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,200 to $2,300
Vinyl or sectional aluminum, single story
Standard
$2,000 to $3,150
Seamless aluminum K-style, standard downspouts
Premium
$2,850 to $3,950
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $890 – $1,750 | $1,550 – $2,400 | $2,150 – $3,000 |
| average house (160 linear ft) | $1,200 – $2,300 | $2,000 – $3,150 | $2,850 – $3,950 |
| large house (240 linear ft) | $1,800 – $3,400 | $3,000 – $4,600 | $4,200 – $5,850 |
Why two Raleigh quotes can differ
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Is Raleigh cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Raleigh. Burlington is the lowest at about $2,500 (midpoint, 160 linear ft), 55 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Raleigh, NCthis page | $1,200 – $3,950 | $2,550 | |
| Durham, NC40 miles | $1,150 – $3,900 | $2,550 | −1% |
| Burlington, NC55 miles | $1,150 – $3,850 | $2,500 | −2% |
| Fayetteville, NC60 miles | $1,150 – $3,850 | $2,500 | −2% |
| Greenville, NC60 miles | $1,150 – $3,900 | $2,550 | −2% |
| Greensboro, NC75 miles | $1,200 – $3,950 | $2,550 | −1% |
| North Carolina (statewide) | $1,200 – $3,950 | $2,550 | −1% |
| United States | $1,300 – $4,200 | $2,750 | +7% |
Out of the 300 metros we cover, Raleigh ranks #178 for the cost of this job (#1 is the most expensive). Statewide, Raleigh is 1% above the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $1,200 – $3,950 | $2,550 | level |
| Greensboro, NC | 365,410 jobs | $1,200 – $3,950 | $2,550 | −1% |
| Durham, NC | 344,020 jobs | $1,150 – $3,900 | $2,550 | −1% |
| Winston, NC | 271,980 jobs | $1,150 – $3,850 | $2,500 | −2% |
| Wilmington, NC | 191,280 jobs | $1,150 – $3,900 | $2,550 | −1% |
| Asheville, NC | 180,620 jobs | $1,200 – $3,950 | $2,600 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Raleigh against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Virginia Beach, VA | 763,060 jobs | $1,200 – $4,000 | $2,600 | +1% |
| Providence, RI | 714,120 jobs | $1,350 – $4,300 | $2,850 | +10% |
| Jacksonville, FL | 765,930 jobs | $1,150 – $3,900 | $2,550 | −2% |
| Louisville, KY | 685,190 jobs | $1,250 – $4,050 | $2,650 | +2% |
Who does the work: Raleigh trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Raleigh the blend is 0.89.
Sheet metal workers (47-2211), 40% of the weighting: a median of $24.31 an hour, 18% below the US median of $29.71. The middle half of them earn between $22.56 and $29.02 an hour. About 470 work in the metro. That is 6.3 per 10,000 jobs, compared with 7.7 nationally, so expect fewer local crews to bid.
Roofers (47-2181), 30% of the weighting: a median of $24.39 an hour, 8% below the US median of $26.65. The middle half of them earn between $23.09 and $27.94 an hour. About 580 work in the metro. That is 7.8 per 10,000 jobs, compared with 8.7 nationally, so the supply of crews looks typical.
For construction laborers (47-2061, weighted 30%) the local median is $21.95 an hour, which is 3% below the national $22.66. The middle half of them earn between $18.31 and $23.77 an hour. BLS counts 6,360 of them working in the area, 85.6 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $65 to the midpoint estimate; the 25th percentile takes off about $25. That is a swing of roughly 1.0% to 2.6% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Raleigh-Cary has 743,120 jobs in total (BLS, May 2025), ranking 41st by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $22.56 | $24.31 | $29.02 | $29.71 | 0.82 | metro |
| Roofers (47-2181) | 30% | $23.09 | $24.39 | $27.94 | $26.65 | 0.92 | metro |
| Construction laborers (47-2061) | 30% | $18.31 | $21.95 | $23.77 | $22.66 | 0.97 | metro |
| Blended | 100% | 0.89 | |||||
The best months for gutters in Raleigh
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Raleigh Durham Intl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Raleigh are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Raleigh gets about 46 inches of precipitation in a normal year, including roughly 5 inches of snow. The wettest months are July, August and September (5.2 inches in September). Inside the workable window, February and November are the driest, at 2.8 and 3.3 inches. The station averages about 52 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 52 | 32 | 3.4 | Workable |
| Feb | 56 | 34 | 2.8 | Workable |
| Mar | 63 | 40 | 4.1 | Workable |
| Apr | 73 | 49 | 3.5 | Workable |
| May | 80 | 58 | 3.4 | Workable |
| Jun | 87 | 66 | 3.9 | Workable |
| Jul | 91 | 70 | 5.0 | Hot |
| Aug | 89 | 69 | 4.7 | Workable |
| Sep | 83 | 63 | 5.2 | Workable |
| Oct | 73 | 50 | 3.4 | Workable |
| Nov | 63 | 40 | 3.3 | Workable |
| Dec | 55 | 34 | 3.4 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,000 to $3,150 for Raleigh, NC is attached.
A detailed PDF report of this estimate, $9
The report lays out the gutters numbers for Raleigh, NC line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Raleigh: your questions
+How much does it cost to install gutters in Raleigh?
For 160 linear ft, expect $1,200 to $3,950 in the Raleigh area. A standard-spec job lands at $2,000 to $3,150. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Raleigh?
About $7.45 to $23.50 per linear ft for materials and labor, plus $0 to $200 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Raleigh or Durham?
Durham is 40 miles away. The midpoint for 160 linear ft there is $2,550, which is 1% less than Raleigh ($2,550). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Raleigh?
About 36% at the midpoint, or $930 out of $2,550. Materials are 60% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Raleigh?
$1,200 to $3,950. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Raleigh?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $200 for fees in the Raleigh area (our national range of $0 to $200 scaled by the local price level).
+Is Raleigh expensive for gutters compared with the rest of North Carolina?
Raleigh is 1% above the North Carolina statewide estimate ($2,550 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do sheet metal workers earn in Raleigh?
The BLS median is $24.31 an hour in the Raleigh area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.56 to $29.02.
+What do basic and premium gutters work cost in Raleigh?
For 160 linear ft, basic work runs $1,200 to $2,300 and premium work $2,850 to $3,950. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Raleigh?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Raleigh
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.