Gutters cost in Louisville, KY
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,250 – $4,050
- Per linear ft
- $7.70 – $24
- before permit
- Versus US midpoint
- −4%
- US $2,750
- Rank of 300 metros
- #152
- 1 = most expensive
Louisville homeowners pay roughly $1,250 to $4,050 to install gutters at 160 linear ft, or $7.70 to $24 per linear ft (permit not included). Against the US midpoint, Louisville is 4% lower. Building materials run about 4% below the US average here (BEA goods price index 96.2).
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Louisville, KY, standard level
$2,050 to $3,200
About $12.50 to $19 per linear ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,900 |
| Labor | $850 | $1,150 |
| Permits and fees | $55 | $130 |
| Total | $2,050 | $3,200 |
Cost breakdown for 160 linear ft in Louisville, KY
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $620 | $1,550 | $2,450 | 58% |
| Labor | $620 | $1,000 | $1,400 | 38% |
| Permits and fees | $0 | $95 | $190 | 4% |
| Total | $1,250 | $2,650 | $4,050 | 100% |
Why Louisville prices look the way they do
Labor is 38% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Louisville the blended ratio comes out at 0.96.
On the materials line, the BEA goods price index for the Louisville metro is 96.2 (US = 100). The midpoint materials bill for 160 linear ft comes to $1,550, compared with $1,600 at national prices. Permit and inspection fees are scaled by the broader index (93.1) and land at $0 to $190.
Specs and site conditions that change a Louisville bid
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 3 trades carry the job here, and each is compared with its US median. The weighted result for Louisville is 0.96 times the national level.
For sheet metal workers (47-2211, weighted 40%) the local median is $29.33 an hour, which is in line with the national $29.71. The middle half of them earn between $23.78 and $38.86 an hour. BLS counts 970 of them working in the area, 14.2 for every 10,000 jobs (US: 7.7), so the local bench is deeper than average.
For roofers (47-2181, weighted 30%) the local median is $23.64 an hour, which is 11% below the national $26.65. The middle half of them earn between $21.77 and $30.14 an hour. BLS counts 550 of them working in the area, 8.0 for every 10,000 jobs (US: 8.7), so the local bench is about average.
Construction laborers (47-2061), 30% of the weighting: a median of $22.80 an hour, in line with the US median of $22.66. The middle half of them earn between $18.98 and $28.03 an hour. About 4,600 work in the metro. That is 67.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.
Quotes come from real crews, not medians. If the sheet metal workers on your job are paid at the 75th percentile ($38.86 an hour) instead of the median, the labor line grows by about $130. At the 25th percentile ($23.78) it shrinks by about $80. The total moves by 5.1% or 3.0%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 685,190 jobs in the Louisville/Jefferson County area. That makes it the 43rd largest of the 300 metros we cover, with 0.44% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $23.78 | $29.33 | $38.86 | $29.71 | 0.99 | metro |
| Roofers (47-2181) | 30% | $21.77 | $23.64 | $30.14 | $26.65 | 0.89 | metro |
| Construction laborers (47-2061) | 30% | $18.98 | $22.80 | $28.03 | $22.66 | 1.01 | metro |
| Blended | 100% | 0.96 | |||||
When to schedule gutters in Louisville
We use NOAA's 1991-2020 climate normals for Louisville Intl Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.
February through December is the stretch where exterior installation runs into the fewest weather problems in Louisville (11 of 12 months). January has an average daytime high under 45°F.
In January the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.
Louisville gets about 48 inches of precipitation in a normal year, including roughly 13 inches of snow. The wettest months are March, April and May (5.2 inches in May). Inside the workable window, February and November are the driest, at 3.4 and 3.4 inches. The station averages about 43 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 44 | 28 | 3.4 | Cold |
| Feb | 48 | 31 | 3.4 | Workable |
| Mar | 58 | 39 | 4.6 | Workable |
| Apr | 70 | 49 | 4.8 | Workable |
| May | 78 | 59 | 5.2 | Workable |
| Jun | 86 | 67 | 4.3 | Workable |
| Jul | 89 | 71 | 4.0 | Workable |
| Aug | 88 | 70 | 3.7 | Workable |
| Sep | 82 | 62 | 3.7 | Workable |
| Oct | 71 | 50 | 3.7 | Workable |
| Nov | 58 | 39 | 3.4 | Workable |
| Dec | 47 | 32 | 4.1 | Workable |
How Louisville compares
Of the five closest metros, 2 are cheaper than Louisville. Bowling Green is the lowest at about $2,500 (midpoint, 160 linear ft), 90 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Louisville, KYthis page | $1,250 – $4,050 | $2,650 | |
| Lexington, KY70 miles | $1,200 – $4,000 | $2,600 | −1% |
| Bloomington, IN90 miles | $1,250 – $4,050 | $2,650 | level |
| Cincinnati, OH90 miles | $1,300 – $4,150 | $2,750 | +4% |
| Bowling Green, KY90 miles | $1,150 – $3,850 | $2,500 | −5% |
| Evansville, IN105 miles | $1,350 – $4,250 | $2,800 | +6% |
| Kentucky (statewide) | $1,200 – $4,000 | $2,600 | −1% |
| United States | $1,300 – $4,200 | $2,750 | +4% |
Across 300 US metros, Louisville comes in at #152 from the top. The priciest is San Francisco, CA at $3,450; the cheapest is Longview, TX at $2,350 (midpoints, 160 linear ft). Statewide, Louisville is 1% above the Kentucky figure.
Other Kentucky metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Lexington, KY | 286,910 jobs | $1,200 – $4,000 | $2,600 | −1% |
| Bowling Green, KY | 82,160 jobs | $1,150 – $3,850 | $2,500 | −5% |
Cities with a workforce like Louisville's
Big cities and small ones price differently, so here is Louisville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Providence, RI | 714,120 jobs | $1,350 – $4,300 | $2,850 | +8% |
| Oklahoma City, OK | 677,680 jobs | $1,200 – $3,900 | $2,550 | −3% |
| Raleigh, NC | 743,120 jobs | $1,200 – $3,950 | $2,550 | −2% |
| Richmond, VA | 660,350 jobs | $1,150 – $3,900 | $2,500 | −4% |
Louisville: what basic, standard and premium work costs
Three bands are cut from the same cited range and localized for Louisville wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 3 common sizes.
Basic
$1,250 to $2,350
Vinyl or sectional aluminum, single story
Standard
$2,050 to $3,200
Seamless aluminum K-style, standard downspouts
Premium
$2,900 to $4,050
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $920 – $1,800 | $1,550 – $2,450 | $2,200 – $3,050 |
| average house (160 linear ft) | $1,250 – $2,350 | $2,050 – $3,200 | $2,900 – $4,050 |
| large house (240 linear ft) | $1,850 – $3,500 | $3,100 – $4,750 | $4,300 – $5,950 |
Planning more than one job in Louisville?
Because every project leans on different trades, Louisville's wage level does not move all prices equally. Against the US midpoint, attic insulation runs +2% and roof replacement −7%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $5,600 – $11,600 | −7% |
| Metal roof | 2,000 sq ft of roof | $9,400 – $30,600 | −6% |
| Vinyl siding | 2,100 sq ft of wall | $8,100 – $24,200 | −4% |
| French drain | 60 linear ft | $600 – $2,100 | level |
| Attic insulation | 1,000 sq ft | $1,050 – $4,050 | +2% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,050 to $3,200 for Louisville, KY is attached.
Take this estimate with you: PDF report, $9
The report lays out the gutters numbers for Louisville, KY line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Louisville: your questions
+How much does it cost to install gutters in Louisville?
For 160 linear ft, expect $1,250 to $4,050 in the Louisville area. A standard-spec job lands at $2,050 to $3,200. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Louisville?
About $7.70 to $24 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Louisville or Lexington?
Lexington is 70 miles away. The midpoint for 160 linear ft there is $2,600, which is 1% less than Louisville ($2,650). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Louisville?
About 38% at the midpoint, or $1,000 out of $2,650. Materials are 58% and permits 4%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Louisville?
$1,250 to $4,050. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Louisville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Louisville area (our national range of $0 to $200 scaled by the local price level).
+Is Louisville expensive for gutters compared with the rest of Kentucky?
Louisville is 1% above the Kentucky statewide estimate ($2,600 at the midpoint). We cover 3 metros in Kentucky; see the state page to compare them.
+What do sheet metal workers earn in Louisville?
The BLS median is $29.33 an hour in the Louisville area, compared with $29.71 nationally. The 25th to 75th percentile range is $23.78 to $38.86.
+What do basic and premium gutters work cost in Louisville?
For 160 linear ft, basic work runs $1,250 to $2,350 and premium work $2,900 to $4,050. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Louisville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Louisville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.