Skip to content
CostLocal

Gutters cost in Muskegon, MI

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (160 linear ft)
$1,350 – $4,250
Per linear ft
$8.35 – $25.50
before permit
Versus US midpoint
+2%
US $2,750
Rank of 300 metros
#102
1 = most expensive

Local price for new gutters in the Muskegon area: $1,350 to $4,250 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Sheet metal workers earn a median of $38.89 an hour in the Muskegon area, 31% above the US median of $29.71.

Estimate your gutters cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Seamless aluminum K-style, standard downspouts

Estimated cost for 160 linear ft in Muskegon, MI, standard level

$2,200 to $3,350

About $13.50 to $20 per linear ft before permits. Labor is about 43% of the bill.

Cost breakdown
PartLowHigh
Materials$1,150$1,850
Labor$1,000$1,350
Permits and fees$55$130
Total$2,200$3,350
Save and get a PDF report

Cost breakdown for 160 linear ft in Muskegon, MI

Part of the jobLowMidpointHighShare
Materials$600$1,500$2,40054%
Labor$730$1,200$1,65043%
Permits and fees$0$95$1903%
Total$1,350$2,800$4,250100%

Why Muskegon prices look the way they do

Labor is 43% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Muskegon the blended ratio comes out at 1.14.

Materials are scaled with BEA's regional price parity for goods. Muskegon is at 93.7 against 100 for the US, so a materials line of $1,600 nationally becomes $1,500 here (midpoint, 160 linear ft). Permits follow the all-items index of 92.5: $0 to $190.

Data note: 30% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Muskegon. The wage table below marks each row.

Muskegon: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Muskegon. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).

Basic

$1,350 to $2,500

Vinyl or sectional aluminum, single story

Standard

$2,200 to $3,350

Seamless aluminum K-style, standard downspouts

Premium

$3,050 to $4,250

Steel or copper, two stories, custom length

Cost by size and quality level
SizeBasicStandardPremium
small house (120 linear ft)$1,000 – $1,900$1,650 – $2,550$2,350 – $3,200
average house (160 linear ft)$1,350 – $2,500$2,200 – $3,350$3,050 – $4,250
large house (240 linear ft)$2,000 – $3,700$3,300 – $5,000$4,550 – $6,250

The best months for gutters in Muskegon

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Muskegon Co Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Muskegon are April through November: 8 of 12. Outside them, January, February, March and December have an average daytime high under 45°F.

In January, February, March and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Muskegon gets about 35 inches of precipitation in a normal year, including roughly 87 inches of snow. The wettest months are April, May and October (3.8 inches in October). Inside the workable window, July and November are the driest, at 2.8 and 2.9 inches. The station averages about 3 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Muskegon Co Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan33212.4Cold
Feb35212.1Cold
Mar44272.4Cold
Apr57373.5Workable
May68483.4Workable
Jun78573.0Workable
Jul82622.8Workable
Aug80613.1Workable
Sep73543.3Workable
Oct61433.8Workable
Nov48342.9Workable
Dec37262.4Cold

Specs and site conditions that change a Muskegon bid

  • Seamless

    Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.

  • Stories

    Two-story homes add $1-$3 per linear foot for ladders and fall protection.

  • Permit

    Local building codes may add $50-$200, though most cities don't require one.

Who does the work: Muskegon trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Muskegon the blend is 1.14.

Sheet metal workers (47-2211), 40% of the weighting: a median of $38.89 an hour, 31% above the US median of $29.71. The middle half of them earn between $22.58 and $41.00 an hour. About 150 work in the metro. That is 24.1 per 10,000 jobs, compared with 7.7 nationally, which suggests plenty of local crews to bid.

Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the Muskegon metro, so we used the Michigan statewide median: $28.62 an hour against $26.65 for the US. The middle half of them earn between $23.02 and $37.56 an hour.

For construction laborers (47-2061, weighted 30%) the local median is $22.60 an hour, which is in line with the national $22.66. The middle half of them earn between $18.99 and $28.27 an hour. BLS counts 270 of them working in the area, 43.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $30 to the midpoint estimate; the 25th percentile takes off about $230. That is a swing of roughly 8.2% to 1.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Muskegon-Norton Shores has 62,340 jobs in total (BLS, May 2025), ranking 278th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Sheet metal workers (47-2211)40%$22.58$38.89$41.00$29.711.31metro
Roofers (47-2181)30%$23.02$28.62$37.56$26.651.07state
Construction laborers (47-2061)30%$18.99$22.60$28.27$22.661.00metro
Blended100%1.14

What nearby projects cost in Muskegon

Jobs that often go together with gutters are priced below at their usual sizes, using the same Muskegon wage and price inputs. Compared with national midpoints, metal roof comes out highest (+4%) and vinyl siding lowest (−7%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Roof replacement2,000 sq ft of roof$6,250 – $12,600+1%
Metal roof2,000 sq ft of roof$10,900 – $33,300+4%
Vinyl siding2,100 sq ft of wall$7,750 – $23,300−7%
French drain60 linear ft$600 – $2,100level
Attic insulation1,000 sq ft$950 – $3,750−6%

How Muskegon compares

Same job, same size (160 linear ft), priced for the nearest metros. Sheboygan is the priciest of the group at $2,850. Grand Rapids is the cheapest at $2,550.

Comparison with nearby areas
AreaRangeMidpointvs. here
Muskegon, MIthis page$1,350 – $4,250$2,800
Grand Rapids, MI45 miles$1,200 – $3,900$2,550−8%
Sheboygan, WI70 miles$1,400 – $4,350$2,850+3%
Milwaukee, WI80 miles$1,350 – $4,300$2,850+2%
Racine, WI80 miles$1,350 – $4,300$2,800+1%
Kalamazoo, MI95 miles$1,350 – $4,300$2,800+1%
Michigan (statewide)$1,300 – $4,150$2,750−2%
United States$1,300 – $4,200$2,750−2%

Out of the 300 metros we cover, Muskegon ranks #102 for the cost of this job (#1 is the most expensive). Statewide, Muskegon is 2% above the Michigan figure.

Elsewhere in Michigan

Michigan metros compared with Muskegon
MetroSizeRangeMidpointvs. here
Detroit, MI1,904,530 jobs$1,400 – $4,450$2,900+5%
Grand Rapids, MI598,260 jobs$1,200 – $3,900$2,550−8%
Ann Arbor, MI219,730 jobs$1,350 – $4,250$2,800level
Lansing, MI217,180 jobs$1,300 – $4,200$2,750−2%
Flint, MI135,040 jobs$1,400 – $4,400$2,900+5%
Kalamazoo, MI121,790 jobs$1,350 – $4,300$2,800+1%

Metros of a similar size

Big cities and small ones price differently, so here is Muskegon against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Terre Haute, IN65,120 jobs$1,250 – $4,100$2,700−3%
Vineland, NJ62,300 jobs$1,650 – $5,000$3,300+19%
Dalton, GA65,300 jobs$1,150 – $3,850$2,500−10%
Hattiesburg, MS62,230 jobs$1,100 – $3,750$2,450−12%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,200 to $3,350 for Muskegon, MI is attached.

Detailed gutters report for Muskegon, MI, $9

The report lays out the gutters numbers for Muskegon, MI line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Gutters in Muskegon: your questions

+How much does it cost to install gutters in Muskegon?

For 160 linear ft, expect $1,350 to $4,250 in the Muskegon area. A standard-spec job lands at $2,200 to $3,350. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for gutters in Muskegon?

About $8.35 to $25.50 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.

+Is gutters cheaper in Muskegon or Grand Rapids?

Grand Rapids is 45 miles away. The midpoint for 160 linear ft there is $2,550, which is 8% less than Muskegon ($2,800). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Muskegon?

About 43% at the midpoint, or $1,200 out of $2,800. Materials are 54% and permits 3%. Nationally, labor is 38%.

+What would average house (160 linear ft) cost in Muskegon?

$1,350 to $4,250. Pick a different size in the estimator above to get your own number.

+Does gutters need a permit in Muskegon?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the Muskegon area (our national range of $0 to $200 scaled by the local price level).

+Is Muskegon expensive for gutters compared with the rest of Michigan?

Muskegon is 2% above the Michigan statewide estimate ($2,750 at the midpoint). We cover 10 metros in Michigan; see the state page to compare them.

+What do sheet metal workers earn in Muskegon?

The BLS median is $38.89 an hour in the Muskegon area, compared with $29.71 nationally. The 25th to 75th percentile range is $22.58 to $41.00.

+What do basic and premium gutters work cost in Muskegon?

For 160 linear ft, basic work runs $1,350 to $2,500 and premium work $3,050 to $4,250. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.

+When is the best time to install gutters in Muskegon?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. July and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

Gutters near Muskegon

Gutters: all pricesGutters in MichiganAll projects in MuskegonMichigan cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.