Gutters cost in Redding, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,450 – $4,600
- Per linear ft
- $8.95 – $27.50
- before permit
- Versus US midpoint
- +10%
- US $2,750
- Rank of 300 metros
- #32
- 1 = most expensive
Local price for new gutters in the Redding area: $1,450 to $4,600 for 160 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 10% higher than the US figure. Sheet metal workers earn a median of $36.82 an hour in the Redding area, 24% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in Redding, CA, standard level
$2,400 to $3,650
About $14.50 to $22 per linear ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,300 | $2,100 |
| Labor | $1,050 | $1,400 |
| Permits and fees | $60 | $140 |
| Total | $2,400 | $3,650 |
Cost breakdown for 160 linear ft in Redding, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $670 | $1,700 | $2,700 | 56% |
| Labor | $760 | $1,250 | $1,700 | 41% |
| Permits and fees | $0 | $100 | $200 | 3% |
| Total | $1,450 | $3,000 | $4,600 | 100% |
Why Redding prices look the way they do
Labor is 41% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In Redding the blended ratio comes out at 1.18. BLS does not publish this trade for the metro, so we used the California statewide median.
Materials are scaled with BEA's regional price parity for goods. Redding is at 105.2 against 100 for the US, so a materials line of $1,600 nationally becomes $1,700 here (midpoint, 160 linear ft). Permits follow the all-items index of 100.7: $0 to $200.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Redding. The wage table below marks each row.
The best months for gutters in Redding
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Redding Muni Ap (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Redding are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Redding gets about 34 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are January, February and December (6.3 inches in December). Inside the workable window, May and October are the driest, at 1.8 and 1.9 inches. The station averages about 106 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 57 | 38 | 6.0 | Workable |
| Feb | 61 | 40 | 5.5 | Workable |
| Mar | 66 | 43 | 4.6 | Workable |
| Apr | 72 | 47 | 2.4 | Workable |
| May | 82 | 54 | 1.8 | Workable |
| Jun | 92 | 62 | 0.8 | Hot |
| Jul | 100 | 67 | 0.1 | Hot |
| Aug | 98 | 64 | 0.1 | Hot |
| Sep | 92 | 58 | 0.5 | Hot |
| Oct | 79 | 50 | 1.9 | Workable |
| Nov | 64 | 42 | 3.5 | Workable |
| Dec | 56 | 37 | 6.3 | Workable |
Who does the work: Redding trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Redding the blend is 1.18.
Sheet metal workers (47-2211) carry 40% of the labor weighting. BLS does not publish this trade for the Redding metro, so we used the California statewide median: $36.82 an hour against $29.71 for the US. The middle half of them earn between $28.47 and $51.62 an hour.
Roofers (47-2181), 30% of the weighting: a median of $29.66 an hour, 11% above the US median of $26.65. The middle half of them earn between $25.10 and $31.00 an hour. About 210 work in the metro. That is 29.4 per 10,000 jobs, compared with 8.7 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $26.82 an hour, which is 18% above the national $22.66. The middle half of them earn between $22.06 and $36.59 an hour. BLS counts 500 of them working in the area, 69.9 for every 10,000 jobs (US: 70.5), so the local bench is about average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $210 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 3.9% to 6.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Redding has 71,550 jobs in total (BLS, May 2025), ranking 257th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $28.47 | $36.82 | $51.62 | $29.71 | 1.24 | state |
| Roofers (47-2181) | 30% | $25.10 | $29.66 | $31.00 | $26.65 | 1.11 | metro |
| Construction laborers (47-2061) | 30% | $22.06 | $26.82 | $36.59 | $22.66 | 1.18 | metro |
| Blended | 100% | 1.18 | |||||
How Redding compares
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 160 linear ft range from $2,600 to $3,050 across Redding and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Redding, CAthis page | $1,450 – $4,600 | $3,000 | |
| Chico, CA80 miles | $1,400 – $4,600 | $3,000 | level |
| Medford, OR120 miles | $1,300 – $4,300 | $2,800 | −8% |
| Reno, NV135 miles | $1,200 – $3,950 | $2,600 | −14% |
| Sacramento, CA145 miles | $1,450 – $4,650 | $3,050 | +1% |
| Napa, CA155 miles | $1,450 – $4,700 | $3,050 | +2% |
| California (statewide) | $1,450 – $4,700 | $3,100 | +2% |
| United States | $1,300 – $4,200 | $2,750 | −9% |
Out of the 300 metros we cover, Redding ranks #32 for the cost of this job (#1 is the most expensive). Statewide, Redding is 2% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $1,450 – $4,650 | $3,050 | +1% |
| San Francisco, CA | 2,373,920 jobs | $1,650 – $5,200 | $3,450 | +14% |
| Riverside, CA | 1,716,760 jobs | $1,400 – $4,500 | $2,950 | −3% |
| San Diego, CA | 1,538,060 jobs | $1,450 – $4,750 | $3,100 | +3% |
| San Jose, CA | 1,134,970 jobs | $1,650 – $5,150 | $3,400 | +13% |
| Sacramento, CA | 1,080,590 jobs | $1,450 – $4,650 | $3,050 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Redding against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Bozeman, MT | 72,210 jobs | $1,350 – $4,350 | $2,850 | −5% |
| Bismarck, ND | 71,270 jobs | $1,250 – $4,100 | $2,650 | −11% |
| Bangor, ME | 72,270 jobs | $1,200 – $4,000 | $2,600 | −13% |
| Lexington Park, MD | 70,650 jobs | $1,300 – $4,250 | $2,750 | −8% |
Redding: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Redding. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,450 to $2,700
Vinyl or sectional aluminum, single story
Standard
$2,400 to $3,650
Seamless aluminum K-style, standard downspouts
Premium
$3,350 to $4,600
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,050 – $2,050 | $1,800 – $2,750 | $2,550 – $3,500 |
| average house (160 linear ft) | $1,450 – $2,700 | $2,400 – $3,650 | $3,350 – $4,600 |
| large house (240 linear ft) | $2,150 – $4,000 | $3,550 – $5,400 | $4,950 – $6,800 |
Gutters: what moves the price in Redding
Permit
Local building codes may add $50-$200, though most cities don't require one.
Material
Vinyl is $8-$12 per linear foot installed and aluminum $10-$20. Steel and copper run higher (HomeGuide).
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Planning more than one job in Redding?
Jobs that often go together with gutters are priced below at their usual sizes, using the same Redding wage and price inputs. Compared with national midpoints, French drain comes out highest (+18%) and attic insulation lowest (+4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,750 – $13,600 | +9% |
| Metal roof | 2,000 sq ft of roof | $11,400 – $35,700 | +10% |
| Vinyl siding | 2,100 sq ft of wall | $9,400 – $28,200 | +12% |
| French drain | 60 linear ft | $710 – $2,450 | +18% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,200 | +4% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,400 to $3,650 for Redding, CA is attached.
Take this estimate with you: PDF report, $9
The report lays out the gutters numbers for Redding, CA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in Redding: your questions
+How much does it cost to install gutters in Redding?
For 160 linear ft, expect $1,450 to $4,600 in the Redding area. A standard-spec job lands at $2,400 to $3,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in Redding?
About $8.95 to $27.50 per linear ft for materials and labor, plus $0 to $200 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in Redding or Chico?
Chico is 80 miles away. The midpoint for 160 linear ft there is $3,000, which is 0% less than Redding ($3,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Redding?
About 41% at the midpoint, or $1,250 out of $3,000. Materials are 56% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in Redding?
$1,450 to $4,600. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in Redding?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $200 for fees in the Redding area (our national range of $0 to $200 scaled by the local price level).
+Is Redding expensive for gutters compared with the rest of California?
Redding is 2% below the California statewide estimate ($3,100 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do sheet metal workers earn in Redding?
BLS has no published metro figure here, so we use the statewide median of $36.82 an hour, compared with $29.71 nationally. The 25th to 75th percentile range is $28.47 to $51.62.
+What do basic and premium gutters work cost in Redding?
For 160 linear ft, basic work runs $1,450 to $2,700 and premium work $3,350 to $4,600. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in Redding?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near Redding
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.