Gutters cost in El Centro, CA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (160 linear ft)
- $1,450 – $4,600
- Per linear ft
- $8.95 – $27.50
- before permit
- Versus US midpoint
- +10%
- US $2,750
- Rank of 300 metros
- #38
- 1 = most expensive
New gutters in El Centro, CA usually costs $1,450 to $4,600 for 160 linear ft. That works out to about $8.95 to $27.50 per linear ft before permits. Compared with the national midpoint that is $270 more. Sheet metal workers earn a median of $36.82 an hour in the El Centro area, 24% above the US median of $29.71.
Estimate your gutters cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 160 linear ft in El Centro, CA, standard level
$2,400 to $3,650
About $14.50 to $22 per linear ft before permits. Labor is about 41% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,300 | $2,100 |
| Labor | $1,050 | $1,400 |
| Permits and fees | $55 | $130 |
| Total | $2,400 | $3,650 |
Cost breakdown for 160 linear ft in El Centro, CA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $670 | $1,700 | $2,700 | 56% |
| Labor | $760 | $1,250 | $1,700 | 41% |
| Permits and fees | $0 | $95 | $190 | 3% |
| Total | $1,450 | $3,000 | $4,600 | 100% |
What is behind the El Centro number
Labor is 41% of the midpoint bill here, against 38% nationally. The mix of trades behind this job is sheet metal workers (40%), roofers (30%), construction laborers (30%). We weight each trade's local median wage by that share and compare it with the national median. In El Centro the blended ratio comes out at 1.18. BLS does not publish this trade for the metro, so we used the California statewide median.
Materials are scaled with BEA's regional price parity for goods. El Centro is at 105.2 against 100 for the US, so a materials line of $1,600 nationally becomes $1,700 here (midpoint, 160 linear ft). Permits follow the all-items index of 95.2: $0 to $190.
Data note: 70% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in El Centro. The wage table below marks each row.
What local crews earn in El Centro
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For El Centro the blend is 1.18.
Sheet metal workers (47-2211) carry 40% of the labor weighting. BLS does not publish this trade for the El Centro metro, so we used the California statewide median: $36.82 an hour against $29.71 for the US. The middle half of them earn between $28.47 and $51.62 an hour.
Roofers (47-2181) carry 30% of the labor weighting. BLS does not publish this trade for the El Centro metro, so we used the California statewide median: $30.58 an hour against $26.65 for the US. The middle half of them earn between $28.57 and $36.27 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $25.75 an hour, which is 14% above the national $22.66. The middle half of them earn between $21.21 and $32.82 an hour. BLS counts 270 of them working in the area, 41.3 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (sheet metal workers) from the median to the 75th percentile wage adds about $210 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 3.9% to 6.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
El Centro has 65,430 jobs in total (BLS, May 2025), ranking 275th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Sheet metal workers (47-2211) | 40% | $28.47 | $36.82 | $51.62 | $29.71 | 1.24 | state |
| Roofers (47-2181) | 30% | $28.57 | $30.58 | $36.27 | $26.65 | 1.15 | state |
| Construction laborers (47-2061) | 30% | $21.21 | $25.75 | $32.82 | $22.66 | 1.14 | metro |
| Blended | 100% | 1.18 | |||||
Gutters: what moves the price in El Centro
Seamless
Seamless costs $3-$5+ more per linear foot than sectional, but has fewer places to leak.
Stories
Two-story homes add $1-$3 per linear foot for ladders and fall protection.
Permit
Local building codes may add $50-$200, though most cities don't require one.
Pick a size, pick a tier: gutters pricing in El Centro
The cited range is split into basic, standard and premium bands, then scaled to El Centro. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from small house (120 linear ft) to large house (240 linear ft).
Basic
$1,450 to $2,700
Vinyl or sectional aluminum, single story
Standard
$2,400 to $3,650
Seamless aluminum K-style, standard downspouts
Premium
$3,300 to $4,600
Steel or copper, two stories, custom length
| Size | Basic | Standard | Premium |
|---|---|---|---|
| small house (120 linear ft) | $1,050 – $2,050 | $1,800 – $2,750 | $2,500 – $3,500 |
| average house (160 linear ft) | $1,450 – $2,700 | $2,400 – $3,650 | $3,300 – $4,600 |
| large house (240 linear ft) | $2,150 – $4,000 | $3,550 – $5,400 | $4,900 – $6,800 |
El Centro against nearby metros and the rest of California
Of the five closest metros, 3 are cheaper than El Centro. Yuma is the lowest at about $2,500 (midpoint, 160 linear ft), 85 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| El Centro, CAthis page | $1,450 – $4,600 | $3,000 | |
| San Diego, CA80 miles | $1,450 – $4,750 | $3,100 | +3% |
| Yuma, AZ85 miles | $1,150 – $3,900 | $2,500 | −16% |
| Riverside, CA115 miles | $1,400 – $4,500 | $2,950 | −2% |
| Los Angeles, CA180 miles | $1,450 – $4,650 | $3,050 | +2% |
| Phoenix, AZ190 miles | $1,200 – $3,900 | $2,550 | −15% |
| California (statewide) | $1,450 – $4,700 | $3,100 | +2% |
| United States | $1,300 – $4,200 | $2,750 | −9% |
Out of the 300 metros we cover, El Centro ranks #38 for the cost of this job (#1 is the most expensive). Statewide, El Centro is 2% below the California figure.
Elsewhere in California
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Los Angeles, CA | 6,271,560 jobs | $1,450 – $4,650 | $3,050 | +2% |
| San Francisco, CA | 2,373,920 jobs | $1,650 – $5,200 | $3,450 | +14% |
| Riverside, CA | 1,716,760 jobs | $1,400 – $4,500 | $2,950 | −2% |
| San Diego, CA | 1,538,060 jobs | $1,450 – $4,750 | $3,100 | +3% |
| San Jose, CA | 1,134,970 jobs | $1,650 – $5,150 | $3,400 | +14% |
| Sacramento, CA | 1,080,590 jobs | $1,450 – $4,650 | $3,050 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is El Centro against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Harrisonburg, VA | 65,460 jobs | $1,150 – $3,900 | $2,550 | −15% |
| Dalton, GA | 65,300 jobs | $1,150 – $3,850 | $2,500 | −16% |
| Amherst, MA | 65,670 jobs | $1,400 – $4,500 | $2,950 | −2% |
| Terre Haute, IN | 65,120 jobs | $1,250 – $4,100 | $2,700 | −11% |
Planning more than one job in El Centro?
Jobs that often go together with gutters are priced below at their usual sizes, using the same El Centro wage and price inputs. Compared with national midpoints, French drain comes out highest (+15%) and attic insulation lowest (+4%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Roof replacement | 2,000 sq ft of roof | $6,800 – $13,800 | +11% |
| Metal roof | 2,000 sq ft of roof | $11,600 – $35,900 | +11% |
| Vinyl siding | 2,100 sq ft of wall | $9,450 – $28,400 | +13% |
| French drain | 60 linear ft | $690 – $2,400 | +15% |
| Attic insulation | 1,000 sq ft | $1,050 – $4,150 | +4% |
El Centro weather and the gutters calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, El Centro 2 Ssw (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in El Centro are November through April: 6 of 12. Outside them, May, June, July, August, September and October have an average daytime high of 90°F or more.
El Centro gets about 3 inches of precipitation in a normal year. The wettest months are January, February and December (0.4 inches in February). Inside the workable window, April and November are the driest, at 0.1 and 0.2 inches. The station averages about 180 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 71 | 43 | 0.4 | Workable |
| Feb | 74 | 47 | 0.4 | Workable |
| Mar | 80 | 52 | 0.3 | Workable |
| Apr | 86 | 57 | 0.1 | Workable |
| May | 94 | 63 | 0.0 | Hot |
| Jun | 103 | 71 | 0.0 | Hot |
| Jul | 107 | 78 | 0.1 | Hot |
| Aug | 107 | 79 | 0.2 | Hot |
| Sep | 102 | 73 | 0.3 | Hot |
| Oct | 92 | 62 | 0.2 | Hot |
| Nov | 79 | 51 | 0.2 | Workable |
| Dec | 70 | 43 | 0.4 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,400 to $3,650 for El Centro, CA is attached.
Take this estimate with you: PDF report, $9
Multi-page report for El Centro, CA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gutters in El Centro: your questions
+How much does it cost to install gutters in El Centro?
For 160 linear ft, expect $1,450 to $4,600 in the El Centro area. A standard-spec job lands at $2,400 to $3,650. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for gutters in El Centro?
About $8.95 to $27.50 per linear ft for materials and labor, plus $0 to $190 for the permit if one is needed. The US range is $8 to $25.
+Is gutters cheaper in El Centro or San Diego?
San Diego is 80 miles away. The midpoint for 160 linear ft there is $3,100, which is 3% more than El Centro ($3,000). Wage and materials indexes both feed that gap.
+How much of the bill is labor in El Centro?
About 41% at the midpoint, or $1,250 out of $3,000. Materials are 56% and permits 3%. Nationally, labor is 38%.
+What would average house (160 linear ft) cost in El Centro?
$1,450 to $4,600. Pick a different size in the estimator above to get your own number.
+Does gutters need a permit in El Centro?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $190 for fees in the El Centro area (our national range of $0 to $200 scaled by the local price level).
+Is El Centro expensive for gutters compared with the rest of California?
El Centro is 2% below the California statewide estimate ($3,100 at the midpoint). We cover 23 metros in California; see the state page to compare them.
+What do sheet metal workers earn in El Centro?
BLS has no published metro figure here, so we use the statewide median of $36.82 an hour, compared with $29.71 nationally. The 25th to 75th percentile range is $28.47 to $51.62.
+What do basic and premium gutters work cost in El Centro?
For 160 linear ft, basic work runs $1,450 to $2,700 and premium work $3,300 to $4,600. Basic means: vinyl or sectional aluminum, single story. Premium means: steel or copper, two stories, custom length.
+When is the best time to install gutters in El Centro?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are November through April. April and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
Gutters near El Centro
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Gutter Installation Cost? (2026) (accessed November 4, 2026)
- Home Genius Exteriors: How Much Does Gutter Installation Cost? (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus the $4-$9 per linear foot labor figure from Home Genius Exteriors.