Skip to content
CostLocal

Gravel driveway cost in Youngstown, OH

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (1,000 sq ft)
$2,450 – $9,900
Per sq ft
$2.45 – $9.75
before permit
Versus US midpoint
−3%
US $6,350
Rank of 300 metros
#163
1 = most expensive

Local price for a gravel driveway in the Youngstown area: $2,450 to $9,900 for 1,000 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Building materials run about 6% below the US average here (BEA goods price index 93.6).

Estimate your gravel driveway cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Excavated base plus top course, fabric, light grading

Add-ons

Estimated cost for 1,000 sq ft in Youngstown, OH, standard level

$4,700 to $7,650

About $4.65 to $7.55 per sq ft before permits. Labor is about 52% of the bill.

Cost breakdown
PartLowHigh
Materials$2,200$3,600
Labor$2,450$3,950
Permits and fees$50$120
Total$4,700$7,650
Save and get a PDF report

Cost breakdown for 1,000 sq ft in Youngstown, OH

Part of the jobLowMidpointHighShare
Materials$1,100$2,900$4,70047%
Labor$1,300$3,200$5,05052%
Permits and fees$0$85$1701%
Total$2,450$6,150$9,900100%

What is behind the Youngstown number

Labor is 52% of the midpoint bill here, against 50% nationally. The mix of trades behind this job is construction laborers (50%), operating engineers and other construction equipment operators (50%). We weight each trade's local median wage by that share and compare it with the national median. In Youngstown the blended ratio comes out at 1.01.

Materials are scaled with BEA's regional price parity for goods. Youngstown is at 93.6 against 100 for the US, so a materials line of $3,100 nationally becomes $2,900 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 87.4: $0 to $170.

The best months for gravel driveway in Youngstown

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Youngstown Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.

For digging, grading and setting material in the ground, the comfortable months in Youngstown are April through November: 8 of 12. Outside them, January, February, March and December have an average overnight low at or below freezing (32°F).

In January, February, March and December the average low is at or below freezing, which means frozen ground and slower digging, compaction and sod or stone placement. NOAA counts about 127 days a year with a low at or below 32°F at this station.

Youngstown gets about 41 inches of precipitation in a normal year, including roughly 68 inches of snow. The wettest months are June, July and September (4.3 inches in July). Inside the workable window, October and November are the driest, at 3.3 and 3.0 inches. The station averages about 8 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Youngstown Rgnl Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan34193.0Cold
Feb37212.5Cold
Mar47283.2Cold
Apr60383.8Workable
May71483.7Workable
Jun79563.9Workable
Jul83604.3Workable
Aug81593.5Workable
Sep74523.8Workable
Oct62423.3Workable
Nov50333.0Workable
Dec39263.2Cold

Who does the work: Youngstown trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Youngstown the blend is 1.01.

For construction laborers (47-2061, weighted 50%) the local median is $23.36 an hour, which is 3% above the national $22.66. The middle half of them earn between $18.83 and $31.39 an hour. BLS counts 850 of them working in the area, 53.1 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.

Operating engineers and other construction equipment operators (47-2073), 50% of the weighting: a median of $28.47 an hour, in line with the US median of $28.78. The middle half of them earn between $24.54 and $40.17 an hour. About 420 work in the metro. That is 26.2 per 10,000 jobs, compared with 30.7 nationally, so the supply of crews looks typical.

A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $560 to the midpoint estimate; the 25th percentile takes off about $310. That is a swing of roughly 5.1% to 9.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Youngstown-Warren has 160,160 jobs in total (BLS, May 2025), ranking 148th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Construction laborers (47-2061)50%$18.83$23.36$31.39$22.661.03metro
Operating engineers and other construction equipment operators (47-2073)50%$24.54$28.47$40.17$28.780.99metro
Blended100%1.01

Cost by quality level and size in Youngstown

The cited range is split into basic, standard and premium bands, then scaled to Youngstown. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from single car (500 sq ft) to long rural (2,000 sq ft).

Basic

$2,450 to $5,400

Crusher-run spread and compacted on firm ground

Standard

$4,700 to $7,650

Excavated base plus top course, fabric, light grading

Premium

$6,900 to $9,900

Deep multi-layer build, edging, culvert or drainage

Cost by size and quality level
SizeBasicStandardPremium
single car (500 sq ft)$1,200 – $2,750$2,350 – $3,900$3,500 – $5,050
two car (1,000 sq ft)$2,450 – $5,400$4,700 – $7,650$6,900 – $9,900
100 ft x 10 ft (1,000 sq ft)$2,450 – $5,400$4,700 – $7,650$6,900 – $9,900
long rural (2,000 sq ft)$4,850 – $10,800$9,300 – $15,200$13,700 – $19,600

What nearby projects cost in Youngstown

Jobs that often go together with gravel driveway are priced below at their usual sizes, using the same Youngstown wage and price inputs. Compared with national midpoints, French drain comes out highest (+4%) and sod installation lowest (−7%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Asphalt driveway600 sq ft$3,100 – $7,650+3%
Concrete driveway600 sq ft$3,650 – $9,250level
French drain60 linear ft$630 – $2,200+4%
Sod installation1,500 sq ft$1,400 – $3,100−7%
Concrete slab400 sq ft$2,400 – $5,050−2%
Paver patio300 sq ft$2,900 – $5,300−3%

How Youngstown compares

Of the five closest metros, none is cheaper than Youngstown. Erie comes closest at about $6,300.

Comparison with nearby areas
AreaRangeMidpointvs. here
Youngstown, OHthis page$2,450 – $9,900$6,150
Akron, OH30 miles$2,650 – $10,700$6,650+8%
Canton, OH40 miles$2,500 – $10,200$6,350+3%
Cleveland, OH45 miles$2,700 – $10,900$6,800+10%
Pittsburgh, PA70 miles$2,600 – $10,500$6,550+6%
Erie, PA75 miles$2,500 – $10,100$6,300+2%
Ohio (statewide)$2,600 – $10,600$6,600+7%
United States$2,500 – $10,200$6,350+3%

Out of the 300 metros we cover, Youngstown ranks #163 for the cost of this job (#1 is the most expensive). Statewide, Youngstown is 6% below the Ohio figure.

Elsewhere in Ohio

Ohio metros compared with Youngstown
MetroSizeRangeMidpointvs. here
Columbus, OH1,105,580 jobs$2,800 – $11,400$7,100+15%
Cincinnati, OH1,101,030 jobs$2,600 – $10,600$6,600+7%
Cleveland, OH1,031,130 jobs$2,700 – $10,900$6,800+10%
Dayton, OH372,660 jobs$2,550 – $10,400$6,450+5%
Akron, OH319,560 jobs$2,650 – $10,700$6,650+8%
Toledo, OH291,530 jobs$2,500 – $10,200$6,400+3%

Metros of a similar size

Big cities and small ones price differently, so here is Youngstown against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Waterbury, CT160,710 jobs$2,800 – $11,300$7,050+15%
Gulfport, MS158,310 jobs$2,200 – $9,100$5,650−8%
Shreveport, LA162,750 jobs$2,200 – $9,050$5,600−9%
Eugene, OR157,710 jobs$2,650 – $10,700$6,650+8%

Specs and site conditions that change a Youngstown bid

  • Labor share

    HomeGuide puts labor at about 50% of a gravel driveway's total cost, so a longer or harder-to-reach site moves the price more than the stone does.

  • Grading and edging

    Grading runs $1-$3 per sq ft. Edging to keep the stone in is $5-$18 per linear foot.

  • Stone is sold by weight

    Stone is priced by the ton, so every extra inch of depth or foot of width adds loads of delivery.

Add-ons priced for Youngstown

Add-ons start from national price ranges and are scaled by 0.97 for Youngstown, which is the average of the area's wage index (1.01) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add edging (approx. 1 ft per 10 sq ft)$490 – $1,750

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,700 to $7,650 for Youngstown, OH is attached.

A detailed PDF report of this estimate, $9

Multi-page report for Youngstown, OH: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Gravel driveway in Youngstown: your questions

+How much does it cost to install a gravel driveway in Youngstown?

For 1,000 sq ft, expect $2,450 to $9,900 in the Youngstown area. A standard-spec job lands at $4,700 to $7,650. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for gravel driveway in Youngstown?

About $2.45 to $9.75 per sq ft for materials and labor, plus $0 to $170 for the permit if one is needed. The US range is $2.50 to $10.

+Is gravel driveway cheaper in Youngstown or Akron?

Akron is 30 miles away. The midpoint for 1,000 sq ft there is $6,650, which is 8% more than Youngstown ($6,150). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Youngstown?

About 52% at the midpoint, or $3,200 out of $6,150. Materials are 47% and permits 1%. Nationally, labor is 50%.

+What would 100 ft x 10 ft (1,000 sq ft) cost in Youngstown?

$2,450 to $9,900. Pick a different size in the estimator above to get your own number.

+Does gravel driveway need a permit in Youngstown?

Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $170 for fees in the Youngstown area (our national range of $0 to $200 scaled by the local price level).

+Is Youngstown expensive for gravel driveway compared with the rest of Ohio?

Youngstown is 6% below the Ohio statewide estimate ($6,600 at the midpoint). We cover 8 metros in Ohio; see the state page to compare them.

+What do construction laborers earn in Youngstown?

The BLS median is $23.36 an hour in the Youngstown area, compared with $22.66 nationally. The 25th to 75th percentile range is $18.83 to $31.39.

+What do basic and premium gravel driveway work cost in Youngstown?

For 1,000 sq ft, basic work runs $2,450 to $5,400 and premium work $6,900 to $9,900. Basic means: crusher-run spread and compacted on firm ground. Premium means: deep multi-layer build, edging, culvert or drainage.

+When is the best time to install a gravel driveway in Youngstown?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are April through November. October and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add edging" add in Youngstown?

$490 to $1,750 for 1,000 sq ft, from a national range scaled by the local wage and goods indexes.

Gravel driveway near Youngstown

Gravel driveway: all pricesGravel driveway in OhioAll projects in YoungstownOhio cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Installed range spans a basic spread-and-compact job ($2.50/sq ft low, CalculateGravel) to a full build with excavation ($10/sq ft high, HomeGuide). Materials low end is DIY stone ($1.20/sq ft, CalculateGravel); high end is half of HomeGuide's $10 because it says labor is about 50% of the project.