Gravel driveway cost in Greenville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (1,000 sq ft)
- $2,250 – $9,250
- Per sq ft
- $2.25 – $9.10
- before permit
- Versus US midpoint
- −9%
- US $6,350
- Rank of 300 metros
- #239
- 1 = most expensive
Local price for a gravel driveway in the Greenville area: $2,250 to $9,250 for 1,000 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Construction laborers earn a median of $20.40 an hour in the Greenville area, 10% below the US median of $22.66.
Estimate your gravel driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 1,000 sq ft in Greenville, NC, standard level
$4,350 to $7,150
About $4.30 to $7.05 per sq ft before permits. Labor is about 46% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,250 | $3,750 |
| Labor | $2,050 | $3,300 |
| Permits and fees | $55 | $120 |
| Total | $4,350 | $7,150 |
Cost breakdown for 1,000 sq ft in Greenville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,150 | $3,000 | $4,850 | 52% |
| Labor | $1,100 | $2,700 | $4,250 | 46% |
| Permits and fees | $0 | $90 | $180 | 2% |
| Total | $2,250 | $5,750 | $9,250 | 100% |
What is behind the Greenville number
The wage side of the estimate leans on construction laborers, who do 50% of the hours on a typical job. Their local median is $20.40 an hour. Add the other trades involved and the blended wage index for Greenville is 0.85 (US = 1.00), which puts labor at 46% of the total.
Materials are scaled with BEA's regional price parity for goods. Greenville is at 96.6 against 100 for the US, so a materials line of $3,100 nationally becomes $3,000 here (midpoint, 1,000 sq ft). Permits follow the all-items index of 88.4: $0 to $180.
Who does the work: Greenville trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Greenville the blend is 0.85.
For construction laborers (47-2061, weighted 50%) the local median is $20.40 an hour, which is 10% below the national $22.66. The middle half of them earn between $17.36 and $23.08 an hour. BLS counts 450 of them working in the area, 55.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 50% of the weighting: a median of $23.05 an hour, 20% below the US median of $28.78. The middle half of them earn between $20.96 and $27.03 an hour. About 210 work in the metro. That is 26.0 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (construction laborers) from the median to the 75th percentile wage adds about $190 to the midpoint estimate; the 25th percentile takes off about $210. That is a swing of roughly 3.7% to 3.2% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Greenville has 80,770 jobs in total (BLS, May 2025), ranking 236th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 50% | $17.36 | $20.40 | $23.08 | $22.66 | 0.90 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 50% | $20.96 | $23.05 | $27.03 | $28.78 | 0.80 | metro |
| Blended | 100% | 0.85 | |||||
Is Greenville cheap or dear? The local comparison
Of the five closest metros, 1 is cheaper than Greenville. Virginia Beach is the lowest at about $5,750 (midpoint, 1,000 sq ft), 100 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greenville, NCthis page | $2,250 – $9,250 | $5,750 | |
| Raleigh, NC60 miles | $2,350 – $9,600 | $5,950 | +3% |
| Fayetteville, NC100 miles | $2,300 – $9,350 | $5,800 | +1% |
| Wilmington, NC100 miles | $2,300 – $9,450 | $5,900 | +2% |
| Durham, NC100 miles | $2,350 – $9,600 | $6,000 | +4% |
| Virginia Beach, VA100 miles | $2,250 – $9,250 | $5,750 | level |
| North Carolina (statewide) | $2,300 – $9,450 | $5,900 | +2% |
| United States | $2,500 – $10,200 | $6,350 | +10% |
Out of the 300 metros we cover, Greenville ranks #239 for the cost of this job (#1 is the most expensive). Statewide, Greenville is 2% below the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $2,350 – $9,600 | $5,950 | +3% |
| Raleigh, NC | 743,120 jobs | $2,350 – $9,600 | $5,950 | +3% |
| Greensboro, NC | 365,410 jobs | $2,250 – $9,200 | $5,750 | −1% |
| Durham, NC | 344,020 jobs | $2,350 – $9,600 | $6,000 | +4% |
| Winston, NC | 271,980 jobs | $2,250 – $9,250 | $5,750 | level |
| Wilmington, NC | 191,280 jobs | $2,300 – $9,450 | $5,900 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Greenville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Odessa, TX | 80,910 jobs | $2,250 – $9,250 | $5,750 | level |
| Jefferson City, MO | 80,220 jobs | $2,700 – $10,900 | $6,850 | +18% |
| Johnson City, TN | 81,690 jobs | $2,250 – $9,150 | $5,700 | −1% |
| Las Cruces, NM | 80,000 jobs | $2,250 – $9,100 | $5,700 | −2% |
The best months for gravel driveway in Greenville
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Greenville (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Greenville are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Greenville gets about 53 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are July, August and September (7.3 inches in September). Inside the workable window, February and November are the driest, at 3.4 and 3.4 inches. The station averages about 53 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 53 | 33 | 3.9 | Workable |
| Feb | 57 | 35 | 3.4 | Workable |
| Mar | 64 | 41 | 4.2 | Workable |
| Apr | 74 | 50 | 3.8 | Workable |
| May | 81 | 59 | 4.0 | Workable |
| Jun | 87 | 67 | 4.4 | Workable |
| Jul | 90 | 71 | 5.9 | Hot |
| Aug | 88 | 70 | 6.0 | Workable |
| Sep | 83 | 64 | 7.3 | Workable |
| Oct | 74 | 52 | 3.6 | Workable |
| Nov | 64 | 41 | 3.4 | Workable |
| Dec | 56 | 35 | 3.5 | Workable |
Optional extras in Greenville
Add-ons start from national price ranges and are scaled by 0.91 for Greenville, which is the average of the area's wage index (0.85) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add edging (approx. 1 ft per 10 sq ft) | $450 – $1,650 |
Planning more than one job in Greenville?
Jobs that often go together with gravel driveway are priced below at their usual sizes, using the same Greenville wage and price inputs. Compared with national midpoints, sod installation comes out highest (−6%) and concrete driveway lowest (−17%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Asphalt driveway | 600 sq ft | $2,850 – $6,800 | −8% |
| Concrete driveway | 600 sq ft | $3,100 – $7,600 | −17% |
| French drain | 60 linear ft | $550 – $1,950 | −8% |
| Sod installation | 1,500 sq ft | $1,400 – $3,100 | −6% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Paver patio | 300 sq ft | $2,700 – $4,850 | −11% |
Why two Greenville quotes can differ
Grading and edging
Grading runs $1-$3 per sq ft. Edging to keep the stone in is $5-$18 per linear foot.
Stone is sold by weight
Stone is priced by the ton, so every extra inch of depth or foot of width adds loads of delivery.
Permit
A driveway permit is typically $50-$200 where one is needed for a new curb cut or connection; plenty of rural counties require none.
Cost by quality level and size in Greenville
The cited range is split into basic, standard and premium bands, then scaled to Greenville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from single car (500 sq ft) to long rural (2,000 sq ft).
Basic
$2,250 to $5,050
Crusher-run spread and compacted on firm ground
Standard
$4,350 to $7,150
Excavated base plus top course, fabric, light grading
Premium
$6,450 to $9,250
Deep multi-layer build, edging, culvert or drainage
| Size | Basic | Standard | Premium |
|---|---|---|---|
| single car (500 sq ft) | $1,150 – $2,550 | $2,200 – $3,650 | $3,300 – $4,700 |
| two car (1,000 sq ft) | $2,250 – $5,050 | $4,350 – $7,150 | $6,450 – $9,250 |
| 100 ft x 10 ft (1,000 sq ft) | $2,250 – $5,050 | $4,350 – $7,150 | $6,450 – $9,250 |
| long rural (2,000 sq ft) | $4,550 – $10,100 | $8,650 – $14,200 | $12,800 – $18,300 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,350 to $7,150 for Greenville, NC is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Greenville, NC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Gravel driveway in Greenville: your questions
+How much does it cost to install a gravel driveway in Greenville?
For 1,000 sq ft, expect $2,250 to $9,250 in the Greenville area. A standard-spec job lands at $4,350 to $7,150. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for gravel driveway in Greenville?
About $2.25 to $9.10 per sq ft for materials and labor, plus $0 to $180 for the permit if one is needed. The US range is $2.50 to $10.
+Is gravel driveway cheaper in Greenville or Raleigh?
Raleigh is 60 miles away. The midpoint for 1,000 sq ft there is $5,950, which is 3% more than Greenville ($5,750). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greenville?
About 46% at the midpoint, or $2,700 out of $5,750. Materials are 52% and permits 2%. Nationally, labor is 50%.
+What would 100 ft x 10 ft (1,000 sq ft) cost in Greenville?
$2,250 to $9,250. Pick a different size in the estimator above to get your own number.
+Does gravel driveway need a permit in Greenville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $0 to $180 for fees in the Greenville area (our national range of $0 to $200 scaled by the local price level).
+Is Greenville expensive for gravel driveway compared with the rest of North Carolina?
Greenville is 2% below the North Carolina statewide estimate ($5,900 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do construction laborers earn in Greenville?
The BLS median is $20.40 an hour in the Greenville area, compared with $22.66 nationally. The 25th to 75th percentile range is $17.36 to $23.08.
+What do basic and premium gravel driveway work cost in Greenville?
For 1,000 sq ft, basic work runs $2,250 to $5,050 and premium work $6,450 to $9,250. Basic means: crusher-run spread and compacted on firm ground. Premium means: deep multi-layer build, edging, culvert or drainage.
+When is the best time to install a gravel driveway in Greenville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add edging" add in Greenville?
$450 to $1,650 for 1,000 sq ft, from a national range scaled by the local wage and goods indexes.
Gravel driveway near Greenville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Gravel Driveway Cost? (2026) (accessed November 4, 2026)
- CalculateGravel: Gravel Driveway Cost in 2026 (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Installed range spans a basic spread-and-compact job ($2.50/sq ft low, CalculateGravel) to a full build with excavation ($10/sq ft high, HomeGuide). Materials low end is DIY stone ($1.20/sq ft, CalculateGravel); high end is half of HomeGuide's $10 because it says labor is about 50% of the project.