Asphalt driveway cost in Greenville, NC
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (600 sq ft)
- $2,850 – $6,800
- Per sq ft
- $4.65 – $11
- before permit
- Versus US midpoint
- −8%
- US $5,250
- Rank of 300 metros
- #228
- 1 = most expensive
An asphalt driveway in Greenville, NC usually costs $2,850 to $6,800 for 600 sq ft. That works out to about $4.65 to $11 per sq ft before permits. Compared with the national midpoint that is $390 less. Paving, surfacing and tamping equipment operators earn a median of $22.99 an hour in the Greenville area, 10% below the US median of $25.64.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Greenville, NC, standard level
$4,050 to $5,650
About $6.60 to $9.15 per sq ft before permits. Labor is about 38% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,250 |
| Labor | $1,450 | $2,250 |
| Permits and fees | $85 | $140 |
| Total | $4,050 | $5,650 |
Cost breakdown for 600 sq ft in Greenville, NC
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,900 | $2,850 | $3,850 | 59% |
| Labor | $890 | $1,850 | $2,800 | 38% |
| Permits and fees | $45 | $110 | $180 | 2% |
| Total | $2,850 | $4,850 | $6,800 | 100% |
Why Greenville prices look the way they do
We price the labor side from BLS wage data for 3 trades: paving, surfacing and tamping equipment operators at 40%, construction laborers at 30%, operating engineers and other construction equipment operators at 30%. Weighted together, Greenville wages are 0.87 times the national level. Labor makes up about 38% of the midpoint estimate (41% at national prices). BLS does not publish this trade for the metro, so we used the North Carolina statewide median.
Materials are scaled with BEA's regional price parity for goods. Greenville is at 96.6 against 100 for the US, so a materials line of $2,950 nationally becomes $2,850 here (midpoint, 600 sq ft). Permits follow the all-items index of 88.4: $45 to $180.
Data note: 40% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Greenville. The wage table below marks each row.
Cost by quality level and size in Greenville
The cited range is split into basic, standard and premium bands, then scaled to Greenville. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$2,850 to $4,450
New topcoat over a sound base, flat lot
Standard
$4,050 to $5,650
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$5,250 to $6,800
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,150 – $1,850 | $1,650 – $2,350 | $2,150 – $2,850 |
| 20x20 (400 sq ft) | $1,900 – $3,000 | $2,700 – $3,800 | $3,550 – $4,600 |
| 2-car (20x30), 600 sq ft | $2,850 – $4,450 | $4,050 – $5,650 | $5,250 – $6,800 |
| long rural (10x100), 1,000 sq ft | $4,700 – $7,300 | $6,650 – $9,300 | $8,650 – $11,200 |
Greenville against nearby metros and the rest of North Carolina
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 600 sq ft range from $4,800 to $5,050 across Greenville and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Greenville, NCthis page | $2,850 – $6,800 | $4,850 | |
| Raleigh, NC60 miles | $2,900 – $6,950 | $4,950 | +2% |
| Fayetteville, NC100 miles | $2,850 – $6,850 | $4,850 | +1% |
| Wilmington, NC100 miles | $2,850 – $6,900 | $4,900 | +1% |
| Durham, NC100 miles | $2,950 – $7,150 | $5,050 | +4% |
| Virginia Beach, VA100 miles | $2,850 – $6,800 | $4,800 | level |
| North Carolina (statewide) | $2,850 – $6,900 | $4,900 | +1% |
| United States | $3,050 – $7,400 | $5,250 | +8% |
Out of the 300 metros we cover, Greenville ranks #228 for the cost of this job (#1 is the most expensive). Statewide, Greenville is 1% below the North Carolina figure.
Elsewhere in North Carolina
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Charlotte, NC | 1,358,370 jobs | $2,900 – $6,950 | $4,900 | +2% |
| Raleigh, NC | 743,120 jobs | $2,900 – $6,950 | $4,950 | +2% |
| Greensboro, NC | 365,410 jobs | $2,850 – $6,850 | $4,850 | level |
| Durham, NC | 344,020 jobs | $2,950 – $7,150 | $5,050 | +4% |
| Winston, NC | 271,980 jobs | $2,850 – $6,850 | $4,850 | level |
| Wilmington, NC | 191,280 jobs | $2,850 – $6,900 | $4,900 | +1% |
Metros of a similar size
Big cities and small ones price differently, so here is Greenville against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Odessa, TX | 80,910 jobs | $2,800 – $6,800 | $4,800 | level |
| Jefferson City, MO | 80,220 jobs | $3,100 – $7,750 | $5,450 | +12% |
| Johnson City, TN | 81,690 jobs | $2,750 – $6,500 | $4,600 | −5% |
| Las Cruces, NM | 80,000 jobs | $2,800 – $6,700 | $4,750 | −2% |
Greenville weather and the asphalt driveway calendar
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Greenville (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For digging, grading and setting material in the ground, the comfortable months in Greenville are August through June: 11 of 12. Outside them, July has an average daytime high of 90°F or more.
Greenville gets about 53 inches of precipitation in a normal year, including roughly 3 inches of snow. The wettest months are July, August and September (7.3 inches in September). Inside the workable window, February and November are the driest, at 3.4 and 3.4 inches. The station averages about 53 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 53 | 33 | 3.9 | Workable |
| Feb | 57 | 35 | 3.4 | Workable |
| Mar | 64 | 41 | 4.2 | Workable |
| Apr | 74 | 50 | 3.8 | Workable |
| May | 81 | 59 | 4.0 | Workable |
| Jun | 87 | 67 | 4.4 | Workable |
| Jul | 90 | 71 | 5.9 | Hot |
| Aug | 88 | 70 | 6.0 | Workable |
| Sep | 83 | 64 | 7.3 | Workable |
| Oct | 74 | 52 | 3.6 | Workable |
| Nov | 64 | 41 | 3.4 | Workable |
| Dec | 56 | 35 | 3.5 | Workable |
Optional extras in Greenville
Add-ons start from national price ranges and are scaled by 0.92 for Greenville, which is the average of the area's wage index (0.87) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $550 – $1,100 |
Specs and site conditions that change a Greenville bid
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
What local crews earn in Greenville
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Greenville the blend is 0.87.
Paving, surfacing and tamping equipment operators (47-2071) carry 40% of the labor weighting. BLS does not publish this trade for the Greenville metro, so we used the North Carolina statewide median: $22.99 an hour against $25.64 for the US. The middle half of them earn between $19.54 and $25.91 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $20.40 an hour, which is 10% below the national $22.66. The middle half of them earn between $17.36 and $23.08 an hour. BLS counts 450 of them working in the area, 55.7 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $23.05 an hour, 20% below the US median of $28.78. The middle half of them earn between $20.96 and $27.03 an hour. About 210 work in the metro. That is 26.0 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (paving, surfacing and tamping equipment operators) from the median to the 75th percentile wage adds about $95 to the midpoint estimate; the 25th percentile takes off about $110. That is a swing of roughly 2.4% to 2.0% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Greenville has 80,770 jobs in total (BLS, May 2025), ranking 236th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $19.54 | $22.99 | $25.91 | $25.64 | 0.90 | state |
| Construction laborers (47-2061) | 30% | $17.36 | $20.40 | $23.08 | $22.66 | 0.90 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $20.96 | $23.05 | $27.03 | $28.78 | 0.80 | metro |
| Blended | 100% | 0.87 | |||||
Related projects, priced for Greenville
Jobs that often go together with asphalt driveway are priced below at their usual sizes, using the same Greenville wage and price inputs. Compared with national midpoints, French drain comes out highest (−8%) and concrete driveway lowest (−17%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,100 – $7,600 | −17% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,250 | −9% |
| Paver patio | 300 sq ft | $2,700 – $4,850 | −11% |
| French drain | 60 linear ft | $550 – $1,950 | −8% |
| Concrete slab | 400 sq ft | $2,150 – $4,600 | −12% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,050 to $5,650 for Greenville, NC is attached.
Take this estimate with you: PDF report, $9
Multi-page report for Greenville, NC: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Greenville: your questions
+How much does it cost to pave a driveway in Greenville?
For 600 sq ft, expect $2,850 to $6,800 in the Greenville area. A standard-spec job lands at $4,050 to $5,650. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for asphalt driveway in Greenville?
About $4.65 to $11 per sq ft for materials and labor, plus $45 to $180 for the permit if one is needed. The US range is $5 to $12.
+Is asphalt driveway cheaper in Greenville or Raleigh?
Raleigh is 60 miles away. The midpoint for 600 sq ft there is $4,950, which is 2% more than Greenville ($4,850). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Greenville?
About 38% at the midpoint, or $1,850 out of $4,850. Materials are 59% and permits 2%. Nationally, labor is 41%.
+What would 2-car (20x30), 600 sq ft cost in Greenville?
$2,850 to $6,800. Pick a different size in the estimator above to get your own number.
+Does asphalt driveway need a permit in Greenville?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $180 for fees in the Greenville area (our national range of $50 to $200 scaled by the local price level).
+Is Greenville expensive for asphalt driveway compared with the rest of North Carolina?
Greenville is 1% below the North Carolina statewide estimate ($4,900 at the midpoint). We cover 11 metros in North Carolina; see the state page to compare them.
+What do paving, surfacing and tamping equipment operators earn in Greenville?
BLS has no published metro figure here, so we use the statewide median of $22.99 an hour, compared with $25.64 nationally. The 25th to 75th percentile range is $19.54 to $25.91.
+What do basic and premium asphalt driveway work cost in Greenville?
For 600 sq ft, basic work runs $2,850 to $4,450 and premium work $5,250 to $6,800. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+When is the best time to pave a driveway in Greenville?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are August through June. February and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a sealcoat" add in Greenville?
$550 to $1,100 for 600 sq ft, from a national range scaled by the local wage and goods indexes.
Asphalt driveway near Greenville
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.