Concrete slab cost in Daphne, AL
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (400 sq ft)
- $2,150 – $4,650
- Per sq ft
- $5.25 – $10.50
- before permit
- Versus US midpoint
- −11%
- US $3,850
- Rank of 300 metros
- #261
- 1 = most expensive
Local price for a concrete slab in the Daphne area: $2,150 to $4,650 for 400 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 11% lower than the US figure. Cement masons and concrete finishers earn a median of $21.50 an hour in the Daphne area, 22% below the US median of $27.41.
Estimate your concrete slab cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 400 sq ft in Daphne, AL, standard level
$2,900 to $3,900
About $6.90 to $9.10 per sq ft before permits. Labor is about 37% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,600 | $2,250 |
| Labor | $1,150 | $1,400 |
| Permits and fees | $150 | $280 |
| Total | $2,900 | $3,900 |
Cost breakdown for 400 sq ft in Daphne, AL
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,150 | $1,950 | $2,700 | 57% |
| Labor | $950 | $1,250 | $1,600 | 37% |
| Permits and fees | $45 | $210 | $380 | 6% |
| Total | $2,150 | $3,400 | $4,650 | 100% |
Where the Daphne price comes from
We price the labor side from BLS wage data for 4 trades: cement masons and concrete finishers at 50%, construction laborers at 30%, operating engineers and other construction equipment operators at 10%, carpenters at 10%. Weighted together, Daphne wages are 0.79 times the national level. Labor makes up about 37% of the midpoint estimate (42% at national prices).
Materials are scaled with BEA's regional price parity for goods. Daphne is at 96.4 against 100 for the US, so a materials line of $2,000 nationally becomes $1,950 here (midpoint, 400 sq ft). Permits follow the all-items index of 94.7: $45 to $380.
Why two Daphne quotes can differ
Small-job minimums
Many crews have a minimum charge, so a 10x10 pad can cost more per square foot than a 20x20 slab.
Finish
A broom finish is the baseline. Stamped, stained, or exposed-aggregate finishes are priced as add-ons on top of the slab.
Thickness and mix
A 4-inch slab uses about 1.23 cubic yards of concrete per 100 sq ft; a 6-inch slab uses about 1.85. Stepping up from a 3,000 PSI to a 4,000-4,500 PSI mix adds $10-$40 per cubic yard (Estimators.us).
Related projects, priced for Daphne
Jobs that often go together with concrete slab are priced below at their usual sizes, using the same Daphne wage and price inputs. Compared with national midpoints, asphalt driveway comes out highest (−10%) and concrete driveway lowest (−15%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,150 – $7,750 | −15% |
| Concrete patio | 300 sq ft | $1,150 – $3,450 | −13% |
| Detached garage | 576 sq ft | $25,400 – $51,100 | −12% |
| Stamped concrete | 400 sq ft | $2,900 – $7,000 | −12% |
| Asphalt driveway | 600 sq ft | $2,750 – $6,600 | −10% |
| Gravel driveway | 1,000 sq ft | $2,200 – $9,050 | −12% |
Optional extras in Daphne
Add-ons start from national price ranges and are scaled by 0.88 for Daphne, which is the average of the area's wage index (0.79) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $350 – $1,050 |
| Remove old concrete first | $700 – $2,100 |
Daphne: what basic, standard and premium work costs
The cited range is split into basic, standard and premium bands, then scaled to Daphne. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x10 pad (100 sq ft) to 30x40 foundation (1,200 sq ft).
Basic
$2,150 to $3,150
4-inch broom-finish slab, light mesh, easy truck access
Standard
$2,900 to $3,900
4-5 inch slab with rebar or heavier mesh and standard base prep
Premium
$3,650 to $4,650
6-inch slab, heavy reinforcement, thick base, pump truck or tight access
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x10 pad (100 sq ft) | $570 – $920 | $840 – $1,200 | $1,100 – $1,450 |
| 12x12 (144 sq ft) | $810 – $1,250 | $1,150 – $1,600 | $1,500 – $1,900 |
| 20x20 (400 sq ft) | $2,150 – $3,150 | $2,900 – $3,900 | $3,650 – $4,650 |
| 24x24 garage floor (576 sq ft) | $3,100 – $4,450 | $4,100 – $5,500 | $5,150 – $6,550 |
| 30x40 foundation (1,200 sq ft) | $6,350 – $9,100 | $8,450 – $11,200 | $10,500 – $13,200 |
Who does the work: Daphne trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 4 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Daphne the blend is 0.79.
Cement masons and concrete finishers (47-2051), 50% of the weighting: a median of $21.50 an hour, 22% below the US median of $27.41. The middle half of them earn between $17.46 and $26.78 an hour. About 220 work in the metro. That is 25.3 per 10,000 jobs, compared with 13.3 nationally, which suggests plenty of local crews to bid.
For construction laborers (47-2061, weighted 30%) the local median is $18.48 an hour, which is 18% below the national $22.66. The middle half of them earn between $17.06 and $22.49 an hour. BLS counts 970 of them working in the area, 111.3 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.
Operating engineers and other construction equipment operators (47-2073), 10% of the weighting: a median of $22.81 an hour, 21% below the US median of $28.78. The middle half of them earn between $19.61 and $27.05 an hour. About 350 work in the metro. That is 40.2 per 10,000 jobs, compared with 30.7 nationally, which suggests plenty of local crews to bid.
Carpenters (47-2031), 10% of the weighting: a median of $22.59 an hour, 22% below the US median of $29.12. The middle half of them earn between $18.16 and $25.41 an hour. About 270 work in the metro. That is 31.0 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
A quick sensitivity check: moving the lead trade (cement masons and concrete finishers) from the median to the 75th percentile wage adds about $150 to the midpoint estimate; the 25th percentile takes off about $120. That is a swing of roughly 3.5% to 4.5% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Daphne-Fairhope-Foley has 87,120 jobs in total (BLS, May 2025), ranking 225th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $17.46 | $21.50 | $26.78 | $27.41 | 0.78 | metro |
| Construction laborers (47-2061) | 30% | $17.06 | $18.48 | $22.49 | $22.66 | 0.82 | metro |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $19.61 | $22.81 | $27.05 | $28.78 | 0.79 | metro |
| Carpenters (47-2031) | 10% | $18.16 | $22.59 | $25.41 | $29.12 | 0.78 | metro |
| Blended | 100% | 0.79 | |||||
Daphne against nearby metros and the rest of Alabama
Same job, same size (400 sq ft), priced for the nearest metros. Crestview is the priciest of the group at $3,550. Gulfport is the cheapest at $3,300.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Daphne, ALthis page | $2,150 – $4,650 | $3,400 | |
| Mobile, AL25 miles | $2,150 – $4,650 | $3,400 | −1% |
| Pensacola, FL35 miles | $2,200 – $4,800 | $3,500 | +3% |
| Gulfport, MS75 miles | $2,100 – $4,550 | $3,300 | −3% |
| Crestview, FL85 miles | $2,250 – $4,850 | $3,550 | +4% |
| Hattiesburg, MS95 miles | $2,100 – $4,600 | $3,350 | −2% |
| Alabama (statewide) | $2,150 – $4,650 | $3,400 | −1% |
| United States | $2,450 – $5,200 | $3,850 | +12% |
Out of the 300 metros we cover, Daphne ranks #261 for the cost of this job (#1 is the most expensive). Statewide, Daphne is 1% above the Alabama figure.
Elsewhere in Alabama
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Birmingham, AL | 520,290 jobs | $2,200 – $4,700 | $3,450 | +1% |
| Huntsville, AL | 266,650 jobs | $2,200 – $4,700 | $3,450 | +1% |
| Mobile, AL | 172,550 jobs | $2,150 – $4,650 | $3,400 | −1% |
| Montgomery, AL | 165,550 jobs | $2,150 – $4,600 | $3,350 | −1% |
| Tuscaloosa, AL | 108,460 jobs | $2,150 – $4,600 | $3,350 | −1% |
| Auburn, AL | 72,710 jobs | $2,150 – $4,600 | $3,350 | −1% |
Metros of a similar size
Big cities and small ones price differently, so here is Daphne against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Joplin, MO | 87,190 jobs | $2,350 – $4,950 | $3,650 | +7% |
| Eau Claire, WI | 86,060 jobs | $2,550 – $5,250 | $3,900 | +14% |
| Monroe, LA | 87,500 jobs | $2,100 – $4,500 | $3,300 | −4% |
| Jackson, TN | 84,530 jobs | $2,200 – $4,700 | $3,450 | +1% |
The best months for concrete slab in Daphne
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Fairhope 3 Ne (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For pouring concrete, the comfortable months in Daphne are February through December: 11 of 12. Outside them, January has an average overnight low of 40°F or below.
The 40°F line is a deliberately cautious stand-in. The American Concrete Institute's cold-weather guide (ACI 306R-16) defines cold-weather concreting around an average daily air temperature below 40°F, which is colder than our test of an average overnight low at or below 40°F, so we flag a few extra shoulder months. In cold weather crews may need heated enclosures, insulating blankets or accelerated mixes, and those measures can raise a quote.
Daphne gets about 66 inches of precipitation in a normal year. The wettest months are June, July and August (7.6 inches in July). Inside the workable window, February and October are the driest, at 4.4 and 4.2 inches. The station averages about 47 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 61 | 39 | 5.3 | Cold |
| Feb | 65 | 43 | 4.4 | Workable |
| Mar | 70 | 47 | 5.0 | Workable |
| Apr | 76 | 53 | 5.2 | Workable |
| May | 83 | 61 | 4.9 | Workable |
| Jun | 87 | 70 | 6.5 | Workable |
| Jul | 89 | 72 | 7.6 | Workable |
| Aug | 89 | 71 | 7.0 | Workable |
| Sep | 86 | 67 | 6.0 | Workable |
| Oct | 79 | 56 | 4.2 | Workable |
| Nov | 70 | 46 | 4.5 | Workable |
| Dec | 64 | 42 | 5.1 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,900 to $3,900 for Daphne, AL is attached.
A detailed PDF report of this estimate, $9
The report lays out the concrete slab numbers for Daphne, AL line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete slab in Daphne: your questions
+How much does it cost to pour a concrete slab in Daphne?
For 400 sq ft, expect $2,150 to $4,650 in the Daphne area. A standard-spec job lands at $2,900 to $3,900. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for concrete slab in Daphne?
About $5.25 to $10.50 per sq ft for materials and labor, plus $45 to $380 for the permit if one is needed. The US range is $6 to $12.
+Is concrete slab cheaper in Daphne or Mobile?
Mobile is 25 miles away. The midpoint for 400 sq ft there is $3,400, which is 1% less than Daphne ($3,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Daphne?
About 37% at the midpoint, or $1,250 out of $3,400. Materials are 57% and permits 6%. Nationally, labor is 42%.
+What would 20x20 (400 sq ft) cost in Daphne?
$2,150 to $4,650. Pick a different size in the estimator above to get your own number.
+Does concrete slab need a permit in Daphne?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $380 for fees in the Daphne area (our national range of $50 to $400 scaled by the local price level).
+Is Daphne expensive for concrete slab compared with the rest of Alabama?
Daphne is 1% above the Alabama statewide estimate ($3,400 at the midpoint). We cover 9 metros in Alabama; see the state page to compare them.
+What do cement masons and concrete finishers earn in Daphne?
The BLS median is $21.50 an hour in the Daphne area, compared with $27.41 nationally. The 25th to 75th percentile range is $17.46 to $26.78.
+What do basic and premium concrete slab work cost in Daphne?
For 400 sq ft, basic work runs $2,150 to $3,150 and premium work $3,650 to $4,650. Basic means: 4-inch broom-finish slab, light mesh, easy truck access. Premium means: 6-inch slab, heavy reinforcement, thick base, pump truck or tight access.
+When is the best time to pour a concrete slab in Daphne?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are February through December. February and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add rebar reinforcement" add in Daphne?
$350 to $1,050 for 400 sq ft, from a national range scaled by the local wage and goods indexes.
Concrete slab near Daphne
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Slab Cost? (2026) (accessed November 4, 2026)
- Estimators.us: Concrete Slab Cost in 2026 | $6-$12/Sq Ft Guide (accessed November 4, 2026)
- HomeGuide: How Much Does a Concrete Patio Cost? (2026) (accessed November 4, 2026)
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020