Concrete driveway cost in New Mexico
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (600 sq ft)
- $3,300 – $8,200
- Per sq ft
- $5.40 – $13.50
- before permit
- Versus US midpoint
- −11%
- US $6,450
- Metros covered
- 3
New Mexico prices for concrete driveway: $3,300 to $8,200 for 600 sq ft, or $5.40 to $13.50 per sq ft without the permit. The state midpoint is 11% below the national one. Local wages for cement masons and concrete finishers are $23.67 an hour.
Inside New Mexico, the metros we cover range from $5,550 (Las Cruces) to $5,900 (Santa Fe) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your concrete driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in New Mexico (statewide), standard level
$4,750 to $6,700
About $7.80 to $11 per sq ft before permits. Labor is about 66% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,600 | $2,000 |
| Labor | $3,050 | $4,550 |
| Permits and fees | $90 | $140 |
| Total | $4,750 | $6,700 |
Cost breakdown for 600 sq ft in New Mexico
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,350 | $1,800 | $2,300 | 32% |
| Labor | $1,900 | $3,800 | $5,700 | 66% |
| Permits and fees | $45 | $120 | $180 | 2% |
| Total | $3,300 | $5,750 | $8,200 | 100% |
Quality levels and sizes in New Mexico
The cited range is cut into three overlapping bands (basic, standard and premium) and scaled to statewide New Mexico wages and prices. The grid prices the same bands at 4 common sizes.
Basic
$3,300 to $5,250
Plain gray, 4-inch broom finish, flat site
Standard
$4,750 to $6,700
5-inch with rebar and saw-cut joints, a border or one color
Premium
$6,200 to $8,200
6-inch for heavy vehicles, stamped or colored, grading needed
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,350 – $2,150 | $1,950 – $2,750 | $2,550 – $3,400 |
| 2-car (20x24), 480 sq ft | $2,650 – $4,200 | $3,800 – $5,400 | $5,000 – $6,600 |
| 2-car + apron (600 sq ft) | $3,300 – $5,250 | $4,750 – $6,700 | $6,200 – $8,200 |
| 3-car (900 sq ft) | $4,900 – $7,800 | $7,100 – $10,000 | $9,250 – $12,200 |
Wages behind the New Mexico number
Statewide wages come from BLS's state-level estimates, which blend big cities with small towns and rural areas. 4 trades drive the labor line for this job, and the weighted ratio against the national wage level is 0.86 for New Mexico.
For cement masons and concrete finishers (47-2051, weighted 50%) the local median is $23.67 an hour, which is 14% below the national $27.41. The middle half of them earn between $21.72 and $28.85 an hour. BLS counts 1,540 of them working in the state, 17.7 for every 10,000 jobs (US: 13.3), so the local bench is deeper than average.
Construction laborers (47-2061), 30% of the weighting: a median of $18.46 an hour, 19% below the US median of $22.66. The middle half of them earn between $17.07 and $22.26 an hour. About 12,470 work in the state. That is 143.2 per 10,000 jobs, compared with 70.5 nationally, which suggests plenty of local crews to bid.
For operating engineers and other construction equipment operators (47-2073, weighted 10%) the local median is $25.00 an hour, which is 13% below the national $28.78. The middle half of them earn between $22.82 and $28.89 an hour. BLS counts 5,520 of them working in the state, 63.4 for every 10,000 jobs (US: 30.7), so the local bench is deeper than average.
For carpenters (47-2031, weighted 10%) the local median is $28.71 an hour, which is in line with the national $29.12. The middle half of them earn between $22.67 and $30.44 an hour. BLS counts 3,630 of them working in the state, 41.7 for every 10,000 jobs (US: 43.1), so the local bench is about average.
A crew paid at the 75th percentile for cement masons and concrete finishers ($28.85 an hour) would add about $420 to the statewide midpoint; one at the 25th percentile ($21.72) would take off about $160. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 870,970 jobs across New Mexico (May 2025), which is 0.6% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Cement masons and concrete finishers (47-2051) | 50% | $21.72 | $23.67 | $28.85 | $27.41 | 0.86 | state |
| Construction laborers (47-2061) | 30% | $17.07 | $18.46 | $22.26 | $22.66 | 0.81 | state |
| Operating engineers and other construction equipment operators (47-2073) | 10% | $22.82 | $25.00 | $28.89 | $28.78 | 0.87 | state |
| Carpenters (47-2031) | 10% | $22.67 | $28.71 | $30.44 | $29.12 | 0.99 | state |
| Blended | 100% | 0.86 | |||||
Concrete driveway: what moves the price in New Mexico
Thickness
HomeGuide prices a standard 4-inch driveway at $6-$15/sq ft and a 6-inch one, recommended for heavy vehicles, at $8-$20/sq ft.
Old driveway removal
Tearing out the old surface adds about $2-$6 per sq ft, and some cities want the haul-off documented.
Grading and drainage
Professional grading runs $3-$8 per sq ft or $700-$2,500 for a typical job. A sloped lot or poor soil raises it.
Finish
Decorative driveways run $10-$25 per sq ft installed: colors and borders at $10-$15, stamped patterns at $15-$20, and high-end finishes at $20-$25+ (HomeGuide).
Permits and the apron
A driveway permit is typically $50-$200 and is often required for new work. The apron where the driveway meets the street can need a separate right-of-way permit.
How New Mexico compares with nearby states
New Mexico ranks 43 of 51 (the 50 states plus DC) for concrete driveway, where 1 is the most expensive. The costliest is Hawaii at $9,600 and the cheapest Mississippi at $5,400, both for 600 sq ft at the midpoint. New Mexico sits at $5,750. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Colorado | 340 miles away | $3,750 – $9,500 | $6,600 | +15% |
| Arizona | 340 miles away | $3,600 – $9,150 | $6,400 | +11% |
| Wyoming | 460 miles away | $3,600 – $9,100 | $6,350 | +11% |
| Utah | 520 miles away | $3,550 – $8,950 | $6,250 | +9% |
| Oklahoma | 540 miles away | $3,150 – $7,750 | $5,450 | −5% |
If you are planning more than one job in New Mexico
The table prices neighboring jobs at their usual sizes using statewide New Mexico wages and prices. Against national midpoints, concrete slab comes out highest (−8%) and paver patio lowest (−13%), because each job leans on different trades.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Asphalt driveway | 600 sq ft | $2,800 – $6,750 | −9% |
| Gravel driveway | 1,000 sq ft | $2,250 – $9,200 | −10% |
| Concrete slab | 400 sq ft | $2,250 – $4,800 | −8% |
| Stamped concrete | 400 sq ft | $2,950 – $7,200 | −9% |
| Paver patio | 300 sq ft | $2,600 – $4,750 | −13% |
| Concrete patio | 300 sq ft | $1,150 – $3,600 | −9% |
New Mexico metro-by-metro prices
2 of the 3 metros sit above the statewide midpoint of $5,750, and the top-to-bottom gap is 7%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (600 sq ft) | Midpoint | vs. state |
|---|---|---|---|
| Santa Fe, NM | $3,400 – $8,450 | $5,900 | +3% |
| Albuquerque, NM | $3,350 – $8,350 | $5,850 | +2% |
| Las Cruces, NM | $3,200 – $7,900 | $5,550 | −3% |
Optional extras in New Mexico
Extras are quoted nationally and then scaled to New Mexico by the average of the local wage index (0.86) and goods index (0.96), a factor of 0.91. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add rebar reinforcement | $550 – $1,650 |
| Remove the old driveway | $1,100 – $3,300 |
Weather windows across New Mexico
Season matters for concrete driveway. For each New Mexico metro below we took NOAA's 1991-2020 monthly normals from the nearest suitable station and counted comfortable months for pouring concrete.
Albuquerque has the longest comfortable season of the metros we cover in New Mexico at 5 months (April through May and August through October); Las Cruces has the shortest at 4 (April through May and September through October). Rainfall runs from 9 inches a year in Albuquerque to 13 inches in Santa Fe.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Albuquerque | 26 | 91 | 9 | 5: April through May and August through October |
| Las Cruces | 30 | 96 | 9 | 4: April through May and September through October |
| Santa Fe | 18 | 86 | 13 | 5: May through September |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,750 to $6,700 for New Mexico is attached.
A detailed PDF report of this estimate, $9
Multi-page report for New Mexico: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Concrete driveway in New Mexico: your questions
+How much does it cost to pour a concrete driveway in New Mexico?
$3,300 to $8,200 for 600 sq ft, using statewide wages and prices. Metro areas inside New Mexico can sit above or below that.
+Which city in New Mexico is cheapest for concrete driveway?
Las Cruces at about $5,550 (midpoint, 600 sq ft). The priciest is Santa Fe at $5,900.
+Is concrete driveway cheaper in New Mexico than the US average?
It is 11% cheaper: $5,750 against $6,450 for 600 sq ft at the midpoint.
+What share of the price is labor in New Mexico?
About 66% ($3,800). Materials are 32%. Statewide labor for this job is weighted 0.86x the national wage level.
+What do cement masons and concrete finishers earn in New Mexico?
The BLS statewide median is $23.67 an hour, against $27.41 for the US. The 25th to 75th percentile range is $21.72 to $28.85.
+Where does New Mexico rank for concrete driveway costs?
43rd most expensive of 51 (the 50 states plus DC) at the midpoint, $5,750 for 600 sq ft. Rank 1 is the costliest.
+What do basic and premium concrete driveway work cost in New Mexico?
For 600 sq ft, basic work runs $3,300 to $5,250 and premium work $6,200 to $8,200. Basic means: plain gray, 4-inch broom finish, flat site. Premium means: 6-inch for heavy vehicles, stamped or colored, grading needed.
+Does the season matter for concrete driveway in New Mexico?
Yes where winters or summers are hard. Of the New Mexico metros we cover, Albuquerque has the most comfortable months (5 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add rebar reinforcement" add in New Mexico?
$550 to $1,650 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.
Concrete driveway by city in New Mexico
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Concrete Driveway Cost? (2026) (accessed November 4, 2026)
- SimplyWise: Concrete Estimate Template: Free PDF + Excel (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = SimplyWise's sample 600 sq ft, 4-inch driveway line ($1,400-$2,400 in materials) divided by 600 sq ft.