Skip to content
CostLocal

Composite deck cost in Cedar Rapids, IA

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (300 sq ft)
$11,600 – $23,300
Per sq ft
$38.50 – $77.50
before permit
Versus US midpoint
−3%
US $18,100
Rank of 300 metros
#139
1 = most expensive

Cedar Rapids homeowners pay roughly $11,600 to $23,300 to build a composite deck at 300 sq ft, or $38.50 to $77.50 per sq ft (permit not included). Against the US midpoint, Cedar Rapids is 3% lower. Building materials run about 6% below the US average here (BEA goods price index 93.7).

Estimate your composite deck cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Mid-grade capped boards with railing and stairs

Add-ons

Estimated cost for 300 sq ft in Cedar Rapids, IA, standard level

$15,100 to $19,800

About $50 to $65.50 per sq ft before permits. Labor is about 61% of the bill.

Cost breakdown
PartLowHigh
Materials$5,850$7,650
Labor$9,200$12,100
Permits and fees$70$110
Total$15,100$19,800
Save and get a PDF report

Cost breakdown for 300 sq ft in Cedar Rapids, IA

Part of the jobLowMidpointHighShare
Materials$4,500$6,750$9,00039%
Labor$7,100$10,600$14,20061%
Permits and fees$45$90$1301%
Total$11,600$17,500$23,300100%

Where the Cedar Rapids price comes from

The wage side of the estimate leans on carpenters, who do 80% of the hours on a typical job. Their local median is $28.33 an hour. Add the other trades involved and the blended wage index for Cedar Rapids is 0.98 (US = 1.00), which puts labor at 61% of the total.

On the materials line, the BEA goods price index for the Cedar Rapids metro is 93.7 (US = 100). The midpoint materials bill for 300 sq ft comes to $6,750, compared with $7,200 at national prices. Permit and inspection fees are scaled by the broader index (89.0) and land at $45 to $130.

Local wages behind the labor line

Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Cedar Rapids is 0.98 times the national level.

For carpenters (47-2031, weighted 80%) the local median is $28.33 an hour, which is in line with the national $29.12. The middle half of them earn between $23.11 and $31.75 an hour. BLS counts 530 of them working in the area, 38.1 for every 10,000 jobs (US: 43.1), so the local bench is about average.

Construction laborers (47-2061), 20% of the weighting: a median of $23.40 an hour, 3% above the US median of $22.66. The middle half of them earn between $21.73 and $28.57 an hour. About 990 work in the metro. That is 71.1 per 10,000 jobs, compared with 70.5 nationally, so the supply of crews looks typical.

Quotes come from real crews, not medians. If the carpenters on your job are paid at the 75th percentile ($31.75 an hour) instead of the median, the labor line grows by about $1,000. At the 25th percentile ($23.11) it shrinks by about $1,550. The total moves by 5.8% or 8.9%, so wages alone rarely explain a quote that is far outside our range.

For context on the local economy, BLS counts 139,260 jobs in the Cedar Rapids area. That makes it the 160th largest of the 300 metros we cover, with 0.09% of US employment.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)80%$23.11$28.33$31.75$29.120.97metro
Construction laborers (47-2061)20%$21.73$23.40$28.57$22.661.03metro
Blended100%0.98

Optional extras in Cedar Rapids

Extras are quoted nationally and then scaled to Cedar Rapids by the average of the local wage index (0.98) and goods index (0.94), a factor of 0.96. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.

Add-on prices
Add-onLocal range
Add a deck railing (approx. 0.3 ft per sq ft)$1,750 – $5,200

How Cedar Rapids compares

Same job, same size (300 sq ft), priced for the nearest metros. Davenport is the priciest of the group at $18,000. Iowa City is the cheapest at $16,100.

Comparison with nearby areas
AreaRangeMidpointvs. here
Cedar Rapids, IAthis page$11,600 – $23,300$17,500
Iowa City, IA40 miles$10,700 – $21,500$16,100−8%
Dubuque, IA45 miles$11,700 – $23,500$17,600+1%
Waterloo, IA55 miles$11,400 – $22,800$17,100−2%
Davenport, IA75 miles$12,000 – $24,000$18,000+3%
La Crosse, WI115 miles$12,000 – $24,000$18,000+3%
Iowa (statewide)$11,500 – $23,100$17,300−1%
United States$12,100 – $24,200$18,100+4%

Across 300 US metros, Cedar Rapids comes in at #139 from the top. The priciest is Honolulu, HI at $25,200; the cheapest is Brownsville, TX at $13,500 (midpoints, 300 sq ft). Statewide, Cedar Rapids is 1% above the Iowa figure.

Other Iowa metros

Iowa metros compared with Cedar Rapids
MetroSizeRangeMidpointvs. here
Des Moines, IA404,130 jobs$11,900 – $23,900$17,900+2%
Davenport, IA180,450 jobs$12,000 – $24,000$18,000+3%
Iowa City, IA93,760 jobs$10,700 – $21,500$16,100−8%
Waterloo, IA84,260 jobs$11,400 – $22,800$17,100−2%
Sioux City, IA75,010 jobs$10,900 – $21,800$16,400−6%
Dubuque, IA58,470 jobs$11,700 – $23,500$17,600+1%

Cities with a workforce like Cedar Rapids's

Big cities and small ones price differently, so here is Cedar Rapids against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Huntington, WV140,740 jobs$11,000 – $22,000$16,500−6%
Rockford, IL137,650 jobs$13,200 – $26,500$19,900+14%
Vallejo, CA144,130 jobs$14,300 – $28,600$21,400+23%
Evansville, IN135,250 jobs$12,400 – $24,700$18,500+6%

Planning more than one job in Cedar Rapids?

Because every project leans on different trades, Cedar Rapids's wage level does not move all prices equally. Against the US midpoint, paver patio runs +1% and wood deck −4%.

Related projects with local prices
ProjectSizeRangevs. US
Wood deck300 sq ft$7,250 – $14,500−4%
Concrete patio300 sq ft$1,200 – $3,900−2%
Paver patio300 sq ft$3,000 – $5,500+1%
Gutters160 linear ft$1,300 – $4,150level

When to schedule composite deck in Cedar Rapids

We use NOAA's 1991-2020 climate normals for Cedar Rapids Muni Ap (5 miles from the city center). These are 30-year monthly averages, not forecasts.

March through November is the stretch where exterior installation runs into the fewest weather problems in Cedar Rapids (9 of 12 months). January, February and December have an average daytime high under 45°F.

In January, February and December the average high stays below 45°F. Sealants, adhesives and some materials, such as vinyl, are harder to install well in the cold, and short daylight cuts the working day.

Cedar Rapids gets about 36 inches of precipitation in a normal year. The wettest months are May, June and July (5.6 inches in June). Inside the workable window, March and November are the driest, at 2.0 and 2.0 inches. The station averages about 12 days a year at 90°F or above.

Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.

Monthly normals, Cedar Rapids Muni Ap (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan28110.9Cold
Feb33161.2Cold
Mar46272.0Workable
Apr60383.6Workable
May71504.3Workable
Jun80605.6Workable
Jul83634.4Workable
Aug81604.1Workable
Sep75523.4Workable
Oct62402.9Workable
Nov46282.0Workable
Dec33171.6Cold

Why two Cedar Rapids quotes can differ

  • Board grade

    Composite materials run $16-$32 per sq ft and the installed price is $40-$80 per sq ft, including the substructure (HomeGuide).

  • Labor

    Labor for composite is $24-$48 per sq ft, higher than wood because the boards need extra parts and more careful assembly.

  • Drainage

    Ground-level decks over poorly draining yards may need $1,000-$4,000 of drainage work first.

Pick a size, pick a tier: composite deck pricing in Cedar Rapids

Three bands are cut from the same cited range and localized for Cedar Rapids wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.

Basic

$11,600 to $16,300

Entry-level composite boards, low deck, simple shape

Standard

$15,100 to $19,800

Mid-grade capped boards with railing and stairs

Premium

$18,600 to $23,300

Premium capped or PVC boards, multi-level, hidden fasteners

Cost by size and quality level
SizeBasicStandardPremium
10x12 (120 sq ft)$4,700 – $6,550$6,100 – $8,000$7,500 – $9,400
12x12 (144 sq ft)$5,600 – $7,850$7,300 – $9,550$9,000 – $11,300
16x20 (320 sq ft)$12,400 – $17,400$16,100 – $21,100$19,900 – $24,900
20x20 (400 sq ft)$15,500 – $21,700$20,200 – $26,400$24,800 – $31,000

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $15,100 to $19,800 for Cedar Rapids, IA is attached.

Take this estimate with you: PDF report, $9

The report lays out the composite deck numbers for Cedar Rapids, IA line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Composite deck in Cedar Rapids: your questions

+How much does it cost to build a composite deck in Cedar Rapids?

For 300 sq ft, expect $11,600 to $23,300 in the Cedar Rapids area. A standard-spec job lands at $15,100 to $19,800. Small jobs usually cost more per sq ft and large ones less.

+What is the price per sq ft for composite deck in Cedar Rapids?

About $38.50 to $77.50 per sq ft for materials and labor, plus $45 to $130 for the permit if one is needed. The US range is $40 to $80.

+Is composite deck cheaper in Cedar Rapids or Iowa City?

Iowa City is 40 miles away. The midpoint for 300 sq ft there is $16,100, which is 8% less than Cedar Rapids ($17,500). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Cedar Rapids?

About 61% at the midpoint, or $10,600 out of $17,500. Materials are 39% and permits 1%. Nationally, labor is 60%.

+What would 16x20 (320 sq ft) cost in Cedar Rapids?

$12,400 to $24,900. Pick a different size in the estimator above to get your own number.

+Does composite deck need a permit in Cedar Rapids?

Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $130 for fees in the Cedar Rapids area (our national range of $50 to $150 scaled by the local price level).

+Is Cedar Rapids expensive for composite deck compared with the rest of Iowa?

Cedar Rapids is 1% above the Iowa statewide estimate ($17,300 at the midpoint). We cover 7 metros in Iowa; see the state page to compare them.

+What do carpenters earn in Cedar Rapids?

The BLS median is $28.33 an hour in the Cedar Rapids area, compared with $29.12 nationally. The 25th to 75th percentile range is $23.11 to $31.75.

+What do basic and premium composite deck work cost in Cedar Rapids?

For 300 sq ft, basic work runs $11,600 to $16,300 and premium work $18,600 to $23,300. Basic means: entry-level composite boards, low deck, simple shape. Premium means: premium capped or PVC boards, multi-level, hidden fasteners.

+When is the best time to build a composite deck in Cedar Rapids?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are March through November. March and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add a deck railing" add in Cedar Rapids?

$1,750 to $5,200 for 300 sq ft, from a national range scaled by the local wage and goods indexes.

Composite deck near Cedar Rapids

Composite deck: all pricesComposite deck in IowaAll projects in Cedar RapidsIowa cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.