Composite deck cost in Macon, GA
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (300 sq ft)
- $9,850 – $19,700
- Per sq ft
- $32.50 – $65.50
- before permit
- Versus US midpoint
- −18%
- US $18,100
- Rank of 300 metros
- #289
- 1 = most expensive
Local price for a composite deck in the Macon area: $9,850 to $19,700 for 300 sq ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 18% lower than the US figure. Carpenters earn a median of $20.03 an hour in the Macon area, 31% below the US median of $29.12.
Estimate your composite deck cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 300 sq ft in Macon, GA, standard level
$12,800 to $16,800
About $42.50 to $55.50 per sq ft before permits. Labor is about 53% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $6,000 | $7,850 |
| Labor | $6,750 | $8,800 |
| Permits and fees | $70 | $110 |
| Total | $12,800 | $16,800 |
Cost breakdown for 300 sq ft in Macon, GA
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $4,600 | $6,950 | $9,250 | 47% |
| Labor | $5,200 | $7,800 | $10,400 | 53% |
| Permits and fees | $45 | $90 | $130 | 1% |
| Total | $9,850 | $14,800 | $19,700 | 100% |
What is behind the Macon number
Labor is 53% of the midpoint bill here, against 60% nationally. The mix of trades behind this job is carpenters (80%), construction laborers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Macon the blended ratio comes out at 0.72.
Materials are scaled with BEA's regional price parity for goods. Macon is at 96.3 against 100 for the US, so a materials line of $7,200 nationally becomes $6,950 here (midpoint, 300 sq ft). Permits follow the all-items index of 88.5: $45 to $130.
Who does the work: Macon trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 2 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Macon the blend is 0.72.
Carpenters (47-2031), 80% of the weighting: a median of $20.03 an hour, 31% below the US median of $29.12. The middle half of them earn between $16.47 and $27.05 an hour. About 70 work in the metro. That is 7.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 20%) the local median is $19.23 an hour, which is 15% below the national $22.66. The middle half of them earn between $17.05 and $20.66 an hour. BLS counts 420 of them working in the area, 44.2 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $2,100 to the midpoint estimate; the 25th percentile takes off about $1,050. That is a swing of roughly 7.1% to 14.1% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Macon-Bibb County has 95,030 jobs in total (BLS, May 2025), ranking 211th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 80% | $16.47 | $20.03 | $27.05 | $29.12 | 0.69 | metro |
| Construction laborers (47-2061) | 20% | $17.05 | $19.23 | $20.66 | $22.66 | 0.85 | metro |
| Blended | 100% | 0.72 | |||||
Pick a size, pick a tier: composite deck pricing in Macon
The cited range is split into basic, standard and premium bands, then scaled to Macon. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from 10x12 (120 sq ft) to 20x20 (400 sq ft).
Basic
$9,850 to $13,800
Entry-level composite boards, low deck, simple shape
Standard
$12,800 to $16,800
Mid-grade capped boards with railing and stairs
Premium
$15,800 to $19,700
Premium capped or PVC boards, multi-level, hidden fasteners
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 10x12 (120 sq ft) | $3,950 – $5,550 | $5,150 – $6,750 | $6,350 – $8,000 |
| 12x12 (144 sq ft) | $4,750 – $6,650 | $6,200 – $8,100 | $7,650 – $9,550 |
| 16x20 (320 sq ft) | $10,500 – $14,700 | $13,700 – $17,900 | $16,800 – $21,000 |
| 20x20 (400 sq ft) | $13,100 – $18,400 | $17,100 – $22,300 | $21,000 – $26,300 |
Planning more than one job in Macon?
Jobs that often go together with composite deck are priced below at their usual sizes, using the same Macon wage and price inputs. Compared with national midpoints, gutters comes out highest (−9%) and wood deck lowest (−14%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood deck | 300 sq ft | $6,450 – $13,000 | −14% |
| Concrete patio | 300 sq ft | $1,100 – $3,400 | −14% |
| Paver patio | 300 sq ft | $2,700 – $4,850 | −11% |
| Gutters | 160 linear ft | $1,150 – $3,850 | −9% |
Optional extras in Macon
Add-ons start from national price ranges and are scaled by 0.84 for Macon, which is the average of the area's wage index (0.72) and goods price index (0.96). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a deck railing (approx. 0.3 ft per sq ft) | $1,500 – $4,550 |
Specs and site conditions that change a Macon bid
Engineering
Large or complex decks may need a structural engineer at $100-$220 an hour to get a permit.
Board grade
Composite materials run $16-$32 per sq ft and the installed price is $40-$80 per sq ft, including the substructure (HomeGuide).
Labor
Labor for composite is $24-$48 per sq ft, higher than wood because the boards need extra parts and more careful assembly.
Is Macon cheap or dear? The local comparison
Same job, same size (300 sq ft), priced for the nearest metros. Atlanta is the priciest of the group at $16,500. Albany is the cheapest at $14,100.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Macon, GAthis page | $9,850 – $19,700 | $14,800 | |
| Warner Robins, GA25 miles | $10,300 – $20,700 | $15,500 | +5% |
| Atlanta, GA70 miles | $11,000 – $22,000 | $16,500 | +11% |
| Columbus, GA70 miles | $10,100 – $20,100 | $15,100 | +2% |
| Athens, GA80 miles | $10,100 – $20,200 | $15,100 | +2% |
| Albany, GA85 miles | $9,400 – $18,900 | $14,100 | −4% |
| Georgia (statewide) | $10,700 – $21,400 | $16,000 | +8% |
| United States | $12,100 – $24,200 | $18,100 | +22% |
Out of the 300 metros we cover, Macon ranks #289 for the cost of this job (#1 is the most expensive). Statewide, Macon is 8% below the Georgia figure.
Elsewhere in Georgia
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Atlanta, GA | 2,889,670 jobs | $11,000 – $22,000 | $16,500 | +11% |
| Augusta, GA | 231,930 jobs | $11,500 – $23,000 | $17,200 | +16% |
| Savannah, GA | 198,360 jobs | $10,100 – $20,200 | $15,200 | +2% |
| Columbus, GA | 116,380 jobs | $10,100 – $20,100 | $15,100 | +2% |
| Gainesville, GA | 103,870 jobs | $10,200 – $20,500 | $15,400 | +4% |
| Athens, GA | 95,800 jobs | $10,100 – $20,200 | $15,100 | +2% |
Metros of a similar size
Big cities and small ones price differently, so here is Macon against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Fort Smith, AR | 95,560 jobs | $9,700 – $19,400 | $14,600 | −2% |
| Barnstable, MA | 94,110 jobs | $13,300 – $26,600 | $19,900 | +35% |
| Athens, GA | 95,800 jobs | $10,100 – $20,200 | $15,100 | +2% |
| Billings, MT | 93,800 jobs | $11,800 – $23,600 | $17,700 | +19% |
The best months for composite deck in Macon
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Macon Middle Ga Rgnl Ap (10 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Macon are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.
Macon gets about 47 inches of precipitation in a normal year. The wettest months are June, July and December (4.8 inches in July). Inside the workable window, May and October are the driest, at 2.6 and 2.6 inches. The station averages about 85 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 59 | 36 | 4.3 | Workable |
| Feb | 63 | 39 | 4.2 | Workable |
| Mar | 71 | 45 | 4.3 | Workable |
| Apr | 78 | 51 | 3.6 | Workable |
| May | 86 | 60 | 2.6 | Workable |
| Jun | 91 | 68 | 4.4 | Hot |
| Jul | 94 | 72 | 4.8 | Hot |
| Aug | 92 | 71 | 4.4 | Hot |
| Sep | 88 | 65 | 3.7 | Workable |
| Oct | 79 | 53 | 2.6 | Workable |
| Nov | 69 | 43 | 3.4 | Workable |
| Dec | 61 | 38 | 4.6 | Workable |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $12,800 to $16,800 for Macon, GA is attached.
A detailed PDF report of this estimate, $9
Multi-page report for Macon, GA: low, typical and high cost, a line-item breakdown of materials and labor by trade, permit notes, the best months to schedule, a quote comparison sheet, red flags, questions for contractors, checklists and every source. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Composite deck in Macon: your questions
+How much does it cost to build a composite deck in Macon?
For 300 sq ft, expect $9,850 to $19,700 in the Macon area. A standard-spec job lands at $12,800 to $16,800. Small jobs usually cost more per sq ft and large ones less.
+What is the price per sq ft for composite deck in Macon?
About $32.50 to $65.50 per sq ft for materials and labor, plus $45 to $130 for the permit if one is needed. The US range is $40 to $80.
+Is composite deck cheaper in Macon or Warner Robins?
Warner Robins is 25 miles away. The midpoint for 300 sq ft there is $15,500, which is 5% more than Macon ($14,800). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Macon?
About 53% at the midpoint, or $7,800 out of $14,800. Materials are 47% and permits 1%. Nationally, labor is 60%.
+What would 16x20 (320 sq ft) cost in Macon?
$10,500 to $21,000. Pick a different size in the estimator above to get your own number.
+Does composite deck need a permit in Macon?
Often, but rules are set by your city or county building office, so call before you hire. Budget $45 to $130 for fees in the Macon area (our national range of $50 to $150 scaled by the local price level).
+Is Macon expensive for composite deck compared with the rest of Georgia?
Macon is 8% below the Georgia statewide estimate ($16,000 at the midpoint). We cover 10 metros in Georgia; see the state page to compare them.
+What do carpenters earn in Macon?
The BLS median is $20.03 an hour in the Macon area, compared with $29.12 nationally. The 25th to 75th percentile range is $16.47 to $27.05.
+What do basic and premium composite deck work cost in Macon?
For 300 sq ft, basic work runs $9,850 to $13,800 and premium work $15,800 to $19,700. Basic means: entry-level composite boards, low deck, simple shape. Premium means: premium capped or PVC boards, multi-level, hidden fasteners.
+When is the best time to build a composite deck in Macon?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. May and October are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add a deck railing" add in Macon?
$1,500 to $4,550 for 300 sq ft, from a national range scaled by the local wage and goods indexes.
Composite deck near Macon
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Composite Decking Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020