Chain-link fence cost in Tyler, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $1,350 – $5,100
- Per linear ft
- $8.70 – $33
- before permit
- Versus US midpoint
- −16%
- US $3,850
- Rank of 300 metros
- #287
- 1 = most expensive
Tyler homeowners pay roughly $1,350 to $5,100 to install a chain-link fence at 150 linear ft, or $8.70 to $33 per linear ft (permit not included). Against the US midpoint, Tyler is 16% lower. Construction laborers earn a median of $18.13 an hour in the Tyler area, 20% below the US median of $22.66.
Estimate your chain-link fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Tyler, TX, standard level
$2,450 to $3,950
About $16 to $25.50 per linear ft before permits. Labor is about 56% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $1,150 | $1,550 |
| Labor | $1,250 | $2,350 |
| Permits and fees | $65 | $110 |
| Total | $2,450 | $3,950 |
Cost breakdown for 150 linear ft in Tyler, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $840 | $1,350 | $1,850 | 42% |
| Labor | $460 | $1,800 | $3,150 | 56% |
| Permits and fees | $35 | $90 | $140 | 3% |
| Total | $1,350 | $3,200 | $5,100 | 100% |
Why Tyler prices look the way they do
We price the labor side from BLS wage data for 2 trades: construction laborers at 60%, carpenters at 40%. Weighted together, Tyler wages are 0.77 times the national level. Labor makes up about 56% of the midpoint estimate (60% at national prices).
On the materials line, the BEA goods price index for the Tyler metro is 93.8 (US = 100). The midpoint materials bill for 150 linear ft comes to $1,350, compared with $1,450 at national prices. Permit and inspection fees are scaled by the broader index (92.2) and land at $35 to $140.
When to schedule chain-link fence in Tyler
We use NOAA's 1991-2020 climate normals for Tyler (in the city). These are 30-year monthly averages, not forecasts.
September through May is the stretch where exterior installation runs into the fewest weather problems in Tyler (9 of 12 months). June, July and August have an average daytime high of 90°F or more.
Tyler gets about 48 inches of precipitation in a normal year. The wettest months are June, October and December (4.8 inches in June). Inside the workable window, September and November are the driest, at 3.2 and 3.8 inches. The station averages about 96 days a year at 90°F or above.
Does the season change the price? Probably, but we do not have a sourced seasonal price curve, so the estimator shows a year-round figure and does not adjust by month. When you collect quotes, ask whether scheduling in a slower month gets a better rate.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 39 | 4.0 | Workable |
| Feb | 63 | 42 | 4.3 | Workable |
| Mar | 70 | 49 | 4.3 | Workable |
| Apr | 77 | 55 | 4.0 | Workable |
| May | 84 | 64 | 4.3 | Workable |
| Jun | 90 | 71 | 4.8 | Hot |
| Jul | 93 | 74 | 2.7 | Hot |
| Aug | 94 | 73 | 2.9 | Hot |
| Sep | 88 | 67 | 3.2 | Workable |
| Oct | 78 | 57 | 4.7 | Workable |
| Nov | 66 | 47 | 3.8 | Workable |
| Dec | 59 | 40 | 4.7 | Workable |
Is Tyler cheap or dear? The local comparison
Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $3,150 to $3,600 across Tyler and its five closest metros.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Tyler, TXthis page | $1,350 – $5,100 | $3,200 | |
| Longview, TX35 miles | $1,350 – $5,150 | $3,250 | +1% |
| Shreveport, LA90 miles | $1,350 – $5,200 | $3,300 | +2% |
| Texarkana, TX100 miles | $1,300 – $4,950 | $3,150 | −2% |
| Dallas, TX105 miles | $1,500 – $5,750 | $3,600 | +12% |
| Waco, TX130 miles | $1,350 – $5,150 | $3,250 | +1% |
| Texas (statewide) | $1,450 – $5,450 | $3,450 | +7% |
| United States | $1,550 – $6,150 | $3,850 | +19% |
Across 300 US metros, Tyler comes in at #287 from the top. The priciest is Honolulu, HI at $5,450; the cheapest is Brownsville, TX at $3,000 (midpoints, 150 linear ft). Statewide, Tyler is 7% below the Texas figure.
Other Texas metros
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Dallas, TX | 4,049,800 jobs | $1,500 – $5,750 | $3,600 | +12% |
| Houston, TX | 3,289,720 jobs | $1,450 – $5,550 | $3,500 | +9% |
| Austin, TX | 1,293,690 jobs | $1,400 – $5,600 | $3,500 | +9% |
| San Antonio, TX | 1,126,880 jobs | $1,400 – $5,300 | $3,350 | +4% |
| El Paso, TX | 339,120 jobs | $1,300 – $4,950 | $3,150 | −3% |
| McAllen, TX | 296,700 jobs | $1,300 – $4,850 | $3,100 | −4% |
Cities with a workforce like Tyler's
Big cities and small ones price differently, so here is Tyler against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Topeka, KS | 115,750 jobs | $1,450 – $5,700 | $3,550 | +11% |
| Charlottesville, VA | 114,780 jobs | $1,500 – $5,850 | $3,650 | +14% |
| Columbus, GA | 116,380 jobs | $1,350 – $5,050 | $3,200 | level |
| Laredo, TX | 109,370 jobs | $1,300 – $4,800 | $3,050 | −5% |
Local wages behind the labor line
Wages are the part of this estimate that changes most from town to town. 2 trades carry the job here, and each is compared with its US median. The weighted result for Tyler is 0.77 times the national level.
Construction laborers (47-2061), 60% of the weighting: a median of $18.13 an hour, 20% below the US median of $22.66. The middle half of them earn between $16.50 and $21.54 an hour. About 650 work in the metro. That is 56.4 per 10,000 jobs, compared with 70.5 nationally, so expect fewer local crews to bid.
For carpenters (47-2031, weighted 40%) the local median is $21.26 an hour, which is 27% below the national $29.12. The middle half of them earn between $17.81 and $22.57 an hour. BLS counts 140 of them working in the area, 12.2 for every 10,000 jobs (US: 43.1), so the local bench is thinner than average.
Quotes come from real crews, not medians. If the construction laborers on your job are paid at the 75th percentile ($21.54 an hour) instead of the median, the labor line grows by about $210. At the 25th percentile ($16.50) it shrinks by about $100. The total moves by 6.5% or 3.1%, so wages alone rarely explain a quote that is far outside our range.
For context on the local economy, BLS counts 115,220 jobs in the Tyler area. That makes it the 189th largest of the 300 metros we cover, with 0.07% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Construction laborers (47-2061) | 60% | $16.50 | $18.13 | $21.54 | $22.66 | 0.80 | metro |
| Carpenters (47-2031) | 40% | $17.81 | $21.26 | $22.57 | $29.12 | 0.73 | metro |
| Blended | 100% | 0.77 | |||||
Chain-link fence: what moves the price in Tyler
Gates
Gates are $80-$1,000+ before installation. Rolling or slide gates are the expensive end.
Survey
A land survey ($300-$900) is worth it before you put a fence near a boundary.
Height
A 4-ft fence runs $10-$20 per linear foot; 6- to 8-ft backyard fences run $15-$40+ (HomeGuide).
Planning more than one job in Tyler?
Because every project leans on different trades, Tyler's wage level does not move all prices equally. Against the US midpoint, vinyl fence runs −10% and wood fence −14%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Wood fence | 150 linear ft | $2,600 – $6,650 | −14% |
| Vinyl fence | 150 linear ft | $4,150 – $8,200 | −10% |
| Aluminum fence | 150 linear ft | $3,300 – $10,100 | −12% |
| Gravel driveway | 1,000 sq ft | $2,150 – $8,800 | −14% |
Pick a size, pick a tier: chain-link fence pricing in Tyler
Three bands are cut from the same cited range and localized for Tyler wages and prices. They overlap on purpose: a good standard job and a modest premium job can cost the same. The grid below prices the same bands at 4 common sizes.
Basic
$1,350 to $2,850
4-ft galvanized, front yard
Standard
$2,450 to $3,950
6-ft galvanized backyard fence
Premium
$3,600 to $5,100
Vinyl-coated, 8 ft, extra gates
| Size | Basic | Standard | Premium |
|---|---|---|---|
| backyard (100 linear ft) | $910 – $1,900 | $1,650 – $2,700 | $2,450 – $3,450 |
| 150 ft (150 linear ft) | $1,350 – $2,850 | $2,450 – $3,950 | $3,600 – $5,100 |
| 200 ft (200 linear ft) | $1,800 – $3,750 | $3,250 – $5,250 | $4,750 – $6,750 |
| full lot (300 linear ft) | $2,650 – $5,600 | $4,850 – $7,850 | $7,100 – $10,000 |
Add-ons priced for Tyler
Extras are quoted nationally and then scaled to Tyler by the average of the local wage index (0.77) and goods index (0.94), a factor of 0.85. Tick any of them in the estimator above to add them to your total. Treat these as planning figures: an add-on touches different trades than the main job, so the scaling is an approximation.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $70 – $850 |
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $2,450 to $3,950 for Tyler, TX is attached.
Detailed chain-link fence report for Tyler, TX, $9
The report lays out the chain-link fence numbers for Tyler, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Chain-link fence in Tyler: your questions
+How much does it cost to install a chain-link fence in Tyler?
For 150 linear ft, expect $1,350 to $5,100 in the Tyler area. A standard-spec job lands at $2,450 to $3,950. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for chain-link fence in Tyler?
About $8.70 to $33 per linear ft for materials and labor, plus $35 to $140 for the permit if one is needed. The US range is $10 to $40.
+Is chain-link fence cheaper in Tyler or Longview?
Longview is 35 miles away. The midpoint for 150 linear ft there is $3,250, which is 1% more than Tyler ($3,200). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Tyler?
About 56% at the midpoint, or $1,800 out of $3,200. Materials are 42% and permits 3%. Nationally, labor is 60%.
+What would 200 ft (200 linear ft) cost in Tyler?
$1,800 to $6,750. Pick a different size in the estimator above to get your own number.
+Does chain-link fence need a permit in Tyler?
Often, but rules are set by your city or county building office, so call before you hire. Budget $35 to $140 for fees in the Tyler area (our national range of $40 to $150 scaled by the local price level).
+Is Tyler expensive for chain-link fence compared with the rest of Texas?
Tyler is 7% below the Texas statewide estimate ($3,450 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do construction laborers earn in Tyler?
The BLS median is $18.13 an hour in the Tyler area, compared with $22.66 nationally. The 25th to 75th percentile range is $16.50 to $21.54.
+What do basic and premium chain-link fence work cost in Tyler?
For 150 linear ft, basic work runs $1,350 to $2,850 and premium work $3,600 to $5,100. Basic means: 4-ft galvanized, front yard. Premium means: vinyl-coated, 8 ft, extra gates.
+When is the best time to install a chain-link fence in Tyler?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. September and November are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Tyler?
$70 to $850, from a national range scaled by the local wage and goods indexes.
Chain-link fence near Tyler
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does a Chain-Link Fence Cost? (2026) (accessed November 4, 2026)
- Visual Fence Pro: Chain Link Fence Cost & Pricing Guide for Contractors (2026) (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = Visual Fence Pro's $6-$13 per foot for residential galvanized 4-6 ft fence (taller or vinyl-coated fence costs more).