Asphalt driveway cost in Connecticut
Statewide estimate from BLS wages and BEA prices. Reviewed Nov 4, 2026.
- Statewide range (600 sq ft)
- $3,350 – $8,450
- Per sq ft
- $5.50 – $13.50
- before permit
- Versus US midpoint
- +13%
- US $5,250
- Metros covered
- 5
What does it cost to pave a driveway in Connecticut? Plan on $3,350 to $8,450 for 600 sq ft. Wages (1.35x the US blend), materials (price index 97.3) and permit costs (103.6) put the state above the national midpoint by 13%.
Inside Connecticut, the metros we cover range from $5,650 (Norwich) to $5,950 (Bridgeport) at the midpoint. Pick your closest city in the table for a tighter number.
Estimate your asphalt driveway cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 600 sq ft in Connecticut (statewide), standard level
$4,850 to $6,900
About $7.95 to $11 per sq ft before permits. Labor is about 49% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $2,500 | $3,300 |
| Labor | $2,250 | $3,450 |
| Permits and fees | $100 | $160 |
| Total | $4,850 | $6,900 |
Cost breakdown for 600 sq ft in Connecticut
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $1,950 | $2,900 | $3,850 | 49% |
| Labor | $1,350 | $2,850 | $4,350 | 49% |
| Permits and fees | $50 | $130 | $210 | 2% |
| Total | $3,350 | $5,900 | $8,450 | 100% |
Connecticut against its neighbors
Connecticut ranks 9 of 51 (the 50 states plus DC) for asphalt driveway, where 1 is the most expensive. The costliest is Hawaii at $7,500 and the cheapest Mississippi at $4,600, both for 600 sq ft at the midpoint. Connecticut sits at $5,900. The five states closest by workforce center are listed below.
| State | Distance | Range | Midpoint | vs. here |
|---|---|---|---|---|
| New York | 80 miles away | $3,450 – $8,450 | $5,950 | +1% |
| Rhode Island | 80 miles away | $3,150 – $7,800 | $5,500 | −7% |
| Massachusetts | 110 miles away | $3,300 – $8,150 | $5,700 | −3% |
| New Hampshire | 110 miles away | $3,100 – $7,650 | $5,400 | −8% |
| New Jersey | 150 miles away | $3,450 – $8,450 | $5,950 | +1% |
Why two Connecticut quotes can differ
New versus overlay
Resurfacing an existing driveway runs $3-$7 per sq ft; a full new driveway runs $5-$12+ (HomeGuide). Tearing out and replacing one is higher still.
Base work
Four to eight inches of compacted aggregate under the asphalt is where cheap quotes cut corners. Base typically runs $1-$3 per sq ft.
Small jobs cost more per foot
Paving crews move a paver, roller and trucks to your address, so a 400 sq ft driveway carries more mobilization per square foot than a 1,000 sq ft one.
Hot-mix price
Hot-mix asphalt is $100-$200 per ton delivered and moves with oil prices (PaveGauge).
Sealcoating
Sealing is $1-$2 per sq ft and is a maintenance cost, not part of the install.
Asphalt driveway cost by metro in Connecticut
2 of the 5 metros sit above the statewide midpoint of $5,900, and the top-to-bottom gap is 5%. Each row prices the default size with that metro's own BLS wages and BEA price levels, so the gap between rows is real local variation rather than a flat markup.
| Metro | Range (600 sq ft) | Midpoint | vs. state |
|---|---|---|---|
| Bridgeport, CT | $3,400 – $8,500 | $5,950 | +1% |
| New Haven, CT | $3,350 – $8,500 | $5,950 | +1% |
| Waterbury, CT | $3,350 – $8,400 | $5,850 | −1% |
| Hartford, CT | $3,350 – $8,350 | $5,850 | −1% |
| Norwich, CT | $3,250 – $8,100 | $5,650 | −4% |
Extras that change the Connecticut total
Add-ons start from national price ranges and are scaled by 1.16 for Connecticut, which is the average of the area's wage index (1.35) and goods price index (0.97). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add a sealcoat | $700 – $1,400 |
When Connecticut weather lets you pave
Weather decides when digging and ground work can happen, and Connecticut is not uniform. The table uses NOAA's 1991-2020 climate normals from the weather station nearest each metro we cover, and counts the months that are neither cold nor hot enough to complicate the job.
Hartford has the longest comfortable season of the metros we cover in Connecticut at 8 months (April through November); Waterbury has the shortest at 7 (April through October). Rainfall runs from 42 inches a year in New Haven to 52 inches in Norwich.
We do not adjust prices by month, because we have no reliable published data on seasonal pricing. Timing is still worth raising when you collect bids.
| Metro | Jan avg low °F | Jul avg high °F | Precip (in/yr) | Comfortable months |
|---|---|---|---|---|
| Hartford | 20 | 85 | 43 | 8: April through November |
| Bridgeport | 24 | 83 | 44 | 8: April through November |
| New Haven | 23 | 82 | 42 | 8: April through November |
| Waterbury | 19 | 84 | 45 | 7: April through October |
| Norwich | 21 | 84 | 52 | 8: April through November |
Basic, standard or premium: Connecticut prices
Bands overlap on purpose, since a good standard job can cost as much as a light premium one. Below are the three bands for the default size, then a grid from 1-car (12x20), 240 sq ft to long rural (10x100), 1,000 sq ft.
Basic
$3,350 to $5,400
New topcoat over a sound base, flat lot
Standard
$4,850 to $6,900
Full new driveway: base, 2-3 in of hot mix, edging
Premium
$6,400 to $8,450
Full tear-out and rebuild, drainage work, heavy-duty depth
| Size | Basic | Standard | Premium |
|---|---|---|---|
| 1-car (12x20), 240 sq ft | $1,350 – $2,200 | $2,000 – $2,850 | $2,650 – $3,500 |
| 20x20 (400 sq ft) | $2,250 – $3,650 | $3,300 – $4,650 | $4,300 – $5,700 |
| 2-car (20x30), 600 sq ft | $3,350 – $5,400 | $4,850 – $6,900 | $6,400 – $8,450 |
| long rural (10x100), 1,000 sq ft | $5,550 – $8,900 | $8,050 – $11,400 | $10,600 – $13,900 |
If you are planning more than one job in Connecticut
Each project weights the trades differently, so Connecticut's wage level does not push every price by the same amount. Compared with the US midpoint, gravel driveway is +12% and concrete slab +4%.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Concrete driveway | 600 sq ft | $3,900 – $9,950 | +8% |
| Gravel driveway | 1,000 sq ft | $2,850 – $11,500 | +12% |
| Paver patio | 300 sq ft | $3,300 – $6,000 | +10% |
| French drain | 60 linear ft | $660 – $2,300 | +10% |
| Concrete slab | 400 sq ft | $2,550 – $5,400 | +4% |
| Concrete patio | 300 sq ft | $1,300 – $4,250 | +6% |
What paving, surfacing and tamping equipment operators and the other trades earn in Connecticut
Connecticut's labor line is priced from 3 trades, each compared with its US median wage. After weighting by each trade's share of the work, the state comes out at 1.35 times the national level.
Paving, surfacing and tamping equipment operators (47-2071), 40% of the weighting: a median of $37.25 an hour, 45% above the US median of $25.64. The middle half of them earn between $29.44 and $46.23 an hour.
For construction laborers (47-2061, weighted 30%) the local median is $28.03 an hour, which is 24% above the national $22.66. The middle half of them earn between $22.92 and $34.98 an hour. BLS counts 7,360 of them working in the state, 43.4 for every 10,000 jobs (US: 70.5), so the local bench is thinner than average.
Operating engineers and other construction equipment operators (47-2073), 30% of the weighting: a median of $37.86 an hour, 32% above the US median of $28.78. The middle half of them earn between $31.11 and $48.85 an hour. About 2,860 work in the state. That is 16.9 per 10,000 jobs, compared with 30.7 nationally, so expect fewer local crews to bid.
A crew paid at the 75th percentile for paving, surfacing and tamping equipment operators ($46.23 an hour) would add about $300 to the statewide midpoint; one at the 25th percentile ($29.44) would take off about $260. Use that as a rough guide to how far a bid can sit from our midpoint on wages alone.
BLS counts 1,696,170 jobs across Connecticut (May 2025), which is 1.1% of US employment.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Paving, surfacing and tamping equipment operators (47-2071) | 40% | $29.44 | $37.25 | $46.23 | $25.64 | 1.45 | state |
| Construction laborers (47-2061) | 30% | $22.92 | $28.03 | $34.98 | $22.66 | 1.24 | state |
| Operating engineers and other construction equipment operators (47-2073) | 30% | $31.11 | $37.86 | $48.85 | $28.78 | 1.32 | state |
| Blended | 100% | 1.35 | |||||
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $4,850 to $6,900 for Connecticut is attached.
Take this estimate with you: PDF report, $9
The report lays out the asphalt driveway numbers for Connecticut line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Asphalt driveway in Connecticut: your questions
+How much does it cost to pave a driveway in Connecticut?
$3,350 to $8,450 for 600 sq ft, using statewide wages and prices. Metro areas inside Connecticut can sit above or below that.
+Which city in Connecticut is cheapest for asphalt driveway?
Norwich at about $5,650 (midpoint, 600 sq ft). The priciest is Bridgeport at $5,950.
+Is asphalt driveway cheaper in Connecticut than the US average?
It is 13% more expensive: $5,900 against $5,250 for 600 sq ft at the midpoint.
+What share of the price is labor in Connecticut?
About 49% ($2,850). Materials are 49%. Statewide labor for this job is weighted 1.35x the national wage level.
+What do paving, surfacing and tamping equipment operators earn in Connecticut?
The BLS statewide median is $37.25 an hour, against $25.64 for the US. The 25th to 75th percentile range is $29.44 to $46.23.
+Where does Connecticut rank for asphalt driveway costs?
9th most expensive of 51 (the 50 states plus DC) at the midpoint, $5,900 for 600 sq ft. Rank 1 is the costliest.
+What do basic and premium asphalt driveway work cost in Connecticut?
For 600 sq ft, basic work runs $3,350 to $5,400 and premium work $6,400 to $8,450. Basic means: new topcoat over a sound base, flat lot. Premium means: full tear-out and rebuild, drainage work, heavy-duty depth.
+Does the season matter for asphalt driveway in Connecticut?
Yes where winters or summers are hard. Of the Connecticut metros we cover, Hartford has the most comfortable months (8 of 12) based on NOAA 1991-2020 normals. Our prices do not change by month, so ask contractors whether they charge more or less in busy and slow seasons.
+What does "add a sealcoat" add in Connecticut?
$700 to $1,400 for 600 sq ft, from a national range scaled by the statewide wage and goods indexes.
Asphalt driveway by city in Connecticut
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does Paving an Asphalt Driveway Cost? (2026) (accessed November 4, 2026)
- PaveGauge: Asphalt Driveway Cost (2026): Price by Size (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = hot-mix asphalt ($2.30-$3.60/sq ft at 3 in) plus aggregate base ($1-$3/sq ft) from PaveGauge's component table.