Skip to content
CostLocal

Aluminum fence cost in Odessa, TX

Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.

Typical range (150 linear ft)
$3,400 – $10,300
Per linear ft
$22.50 – $68
before permit
Versus US midpoint
−9%
US $7,600
Rank of 300 metros
#255
1 = most expensive

Local price for an aluminum fence in the Odessa area: $3,400 to $10,300 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint runs 9% lower than the US figure. Carpenters earn a median of $25.12 an hour in the Odessa area, 14% below the US median of $29.12.

Estimate your aluminum fence cost

Pick a size, a quality level and where you live. Prices update as you type.

Quality level

Ornamental pool-code fence, 4-5 ft

Add-ons

Estimated cost for 150 linear ft in Odessa, TX, standard level

$5,500 to $8,250

About $36 to $54.50 per linear ft before permits. Labor is about 32% of the bill.

Cost breakdown
PartLowHigh
Materials$3,600$5,550
Labor$1,850$2,600
Permits and fees$70$110
Total$5,500$8,250
Save and get a PDF report

Cost breakdown for 150 linear ft in Odessa, TX

Part of the jobLowMidpointHighShare
Materials$2,100$4,550$7,05066%
Labor$1,250$2,200$3,15032%
Permits and fees$40$90$1401%
Total$3,400$6,900$10,300100%

Where the Odessa price comes from

Labor is 32% of the midpoint bill here, against 35% nationally. The mix of trades behind this job is carpenters (40%), construction laborers (40%), sheet metal workers (20%). We weight each trade's local median wage by that share and compare it with the national median. In Odessa the blended ratio comes out at 0.85.

Materials are scaled with BEA's regional price parity for goods. Odessa is at 93.8 against 100 for the US, so a materials line of $4,900 nationally becomes $4,550 here (midpoint, 150 linear ft). Permits follow the all-items index of 93.9: $40 to $140.

Data note: 20% of the labor weighting for this project uses a statewide median because BLS has no published metro figure for that trade in Odessa. The wage table below marks each row.

How Odessa compares

Contractors rarely work more than an hour or two from home, so the neighboring metros set a rough ceiling and floor for your quotes. Midpoints for 150 linear ft range from $6,600 to $7,050 across Odessa and its five closest metros.

Comparison with nearby areas
AreaRangeMidpointvs. here
Odessa, TXthis page$3,400 – $10,300$6,900
Midland, TX35 miles$3,500 – $10,600$7,050+3%
Lubbock, TX115 miles$3,250 – $10,000$6,650−4%
Abilene, TX170 miles$3,250 – $10,000$6,600−4%
El Paso, TX175 miles$3,250 – $9,950$6,600−4%
Amarillo, TX235 miles$3,350 – $10,200$6,800−1%
Texas (statewide)$3,500 – $10,700$7,100+3%
United States$3,800 – $11,400$7,600+10%

Out of the 300 metros we cover, Odessa ranks #255 for the cost of this job (#1 is the most expensive). Statewide, Odessa is 3% below the Texas figure.

Elsewhere in Texas

Texas metros compared with Odessa
MetroSizeRangeMidpointvs. here
Dallas, TX4,049,800 jobs$3,650 – $11,200$7,400+8%
Houston, TX3,289,720 jobs$3,550 – $10,900$7,200+5%
Austin, TX1,293,690 jobs$3,500 – $10,600$7,050+2%
San Antonio, TX1,126,880 jobs$3,400 – $10,300$6,850level
El Paso, TX339,120 jobs$3,250 – $9,950$6,600−4%
McAllen, TX296,700 jobs$3,200 – $9,850$6,550−5%

Metros of a similar size

Big cities and small ones price differently, so here is Odessa against the 4 metros with the closest total employment.

Metros closest to this one by total employment
MetroSizeRangeMidpointvs. here
Johnson City, TN81,690 jobs$3,500 – $10,600$7,050+2%
Greenville, NC80,770 jobs$3,450 – $10,500$7,000+1%
Idaho Falls, ID81,840 jobs$3,550 – $10,700$7,100+3%
Jefferson City, MO80,220 jobs$3,850 – $11,400$7,650+11%

Extras that change the Odessa total

Add-ons start from national price ranges and are scaled by 0.89 for Odessa, which is the average of the area's wage index (0.85) and goods price index (0.94). The estimator above can add them to your total.

Add-on prices
Add-onLocal range
Add one gate (flat)$180 – $800

The best months for aluminum fence in Odessa

Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Odessa (in the city). They are 30-year averages, so any one year can run hotter, colder or wetter.

For exterior installation, the comfortable months in Odessa are September through May: 9 of 12. Outside them, June, July and August have an average daytime high of 90°F or more.

Odessa gets about 12 inches of precipitation in a normal year. The wettest months are May, August and September (1.6 inches in May). Inside the workable window, February and December are the driest, at 0.5 and 0.6 inches. The station averages about 106 days a year at 90°F or above.

We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.

Monthly normals, Odessa (NOAA, 1991-2020)
MonthAvg high °FAvg low °FPrecip (in)For this job
Jan57320.7Workable
Feb62360.5Workable
Mar71440.7Workable
Apr79510.7Workable
May87611.6Workable
Jun94681.0Hot
Jul94711.5Hot
Aug93701.6Hot
Sep85621.5Workable
Oct77531.3Workable
Nov66410.6Workable
Dec58330.6Workable

Why two Odessa quotes can differ

  • Permit

    A fence permit runs $40-$150.

  • Style

    Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).

  • Soil and slope

    Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.

Odessa: what basic, standard and premium work costs

The cited range is split into basic, standard and premium bands, then scaled to Odessa. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).

Basic

$3,400 to $6,200

Standard picket or ornamental, 4 ft

Standard

$5,500 to $8,250

Ornamental pool-code fence, 4-5 ft

Premium

$7,550 to $10,300

Tall privacy slat or custom ornamental

Cost by size and quality level
SizeBasicStandardPremium
pool fence (100 linear ft)$2,300 – $4,150$3,700 – $5,550$5,100 – $6,950
150 ft (150 linear ft)$3,400 – $6,200$5,500 – $8,250$7,550 – $10,300
200 ft (200 linear ft)$4,550 – $8,200$7,300 – $11,000$10,100 – $13,700

Who does the work: Odessa trade wages

The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Odessa the blend is 0.85.

Carpenters (47-2031), 40% of the weighting: a median of $25.12 an hour, 14% below the US median of $29.12. The middle half of them earn between $22.57 and $28.35 an hour. About 180 work in the metro. That is 22.2 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.

For construction laborers (47-2061, weighted 40%) the local median is $18.45 an hour, which is 19% below the national $22.66. The middle half of them earn between $17.34 and $22.12 an hour. BLS counts 970 of them working in the area, 119.9 for every 10,000 jobs (US: 70.5), so the local bench is deeper than average.

Sheet metal workers (47-2211) carry 20% of the labor weighting. BLS does not publish this trade for the Odessa metro, so we used the Texas statewide median: $26.08 an hour against $29.71 for the US. The middle half of them earn between $21.61 and $30.51 an hour.

A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $120 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 1.3% to 1.7% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.

Odessa has 80,910 jobs in total (BLS, May 2025), ranking 235th by size among the 300 metros on this site.

Median hourly wages behind the labor line (BLS OEWS, May 2025)
TradeWeight25th pctMedian75th pctUS medianRatioLevel used
Carpenters (47-2031)40%$22.57$25.12$28.35$29.120.86metro
Construction laborers (47-2061)40%$17.34$18.45$22.12$22.660.81metro
Sheet metal workers (47-2211)20%$21.61$26.08$30.51$29.710.88state
Blended100%0.85

What nearby projects cost in Odessa

Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Odessa wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−8%) and chain-link fence lowest (−13%); the gap comes from the trades each job uses.

Related projects with local prices
ProjectSizeRangevs. US
Vinyl fence150 linear ft$4,200 – $8,350−8%
Wood fence150 linear ft$2,700 – $6,900−10%
Chain-link fence150 linear ft$1,400 – $5,350−13%
Inground pool450 sq ft$32,800 – $102,500−9%

Get 3 local quotes

Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,500 to $8,250 for Odessa, TX is attached.

Detailed aluminum fence report for Odessa, TX, $9

The report lays out the aluminum fence numbers for Odessa, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.

Aluminum fence in Odessa: your questions

+How much does it cost to install an aluminum fence in Odessa?

For 150 linear ft, expect $3,400 to $10,300 in the Odessa area. A standard-spec job lands at $5,500 to $8,250. Small jobs usually cost more per linear ft and large ones less.

+What is the price per linear ft for aluminum fence in Odessa?

About $22.50 to $68 per linear ft for materials and labor, plus $40 to $140 for the permit if one is needed. The US range is $25 to $75.

+Is aluminum fence cheaper in Odessa or Midland?

Midland is 35 miles away. The midpoint for 150 linear ft there is $7,050, which is 3% more than Odessa ($6,900). Wage and materials indexes both feed that gap.

+How much of the bill is labor in Odessa?

About 32% at the midpoint, or $2,200 out of $6,900. Materials are 66% and permits 1%. Nationally, labor is 35%.

+What would 150 ft (150 linear ft) cost in Odessa?

$3,400 to $10,300. Pick a different size in the estimator above to get your own number.

+Does aluminum fence need a permit in Odessa?

Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $140 for fees in the Odessa area (our national range of $40 to $150 scaled by the local price level).

+Is Odessa expensive for aluminum fence compared with the rest of Texas?

Odessa is 3% below the Texas statewide estimate ($7,100 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.

+What do carpenters earn in Odessa?

The BLS median is $25.12 an hour in the Odessa area, compared with $29.12 nationally. The 25th to 75th percentile range is $22.57 to $28.35.

+What do basic and premium aluminum fence work cost in Odessa?

For 150 linear ft, basic work runs $3,400 to $6,200 and premium work $7,550 to $10,300. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.

+When is the best time to install an aluminum fence in Odessa?

Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are September through May. February and December are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.

+What does "add one gate" add in Odessa?

$180 to $800, from a national range scaled by the local wage and goods indexes.

Aluminum fence near Odessa

Aluminum fence: all pricesAluminum fence in TexasAll projects in OdessaTexas cost hub

Where these numbers come from

Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.

Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.