Aluminum fence cost in Dallas, TX
Local estimate from BLS wage data and BEA price levels. Reviewed Nov 4, 2026.
- Typical range (150 linear ft)
- $3,650 – $11,200
- Per linear ft
- $24 – $73.50
- before permit
- Versus US midpoint
- −2%
- US $7,600
- Rank of 300 metros
- #128
- 1 = most expensive
Local price for an aluminum fence in the Dallas area: $3,650 to $11,200 for 150 linear ft. The low end is a basic job on easy ground; the high end is a premium spec with harder access. The midpoint lands close to the US figure. Carpenters earn a median of $23.44 an hour in the Dallas area, 20% below the US median of $29.12.
Estimate your aluminum fence cost
Pick a size, a quality level and where you live. Prices update as you type.
Estimated cost for 150 linear ft in Dallas, TX, standard level
$5,900 to $8,900
About $39 to $58.50 per linear ft before permits. Labor is about 31% of the bill.
| Part | Low | High |
|---|---|---|
| Materials | $3,950 | $6,100 |
| Labor | $1,900 | $2,700 |
| Permits and fees | $75 | $120 |
| Total | $5,900 | $8,900 |
Cost breakdown for 150 linear ft in Dallas, TX
| Part of the job | Low | Midpoint | High | Share |
|---|---|---|---|---|
| Materials | $2,300 | $5,000 | $7,700 | 68% |
| Labor | $1,300 | $2,300 | $3,300 | 31% |
| Permits and fees | $40 | $100 | $150 | 1% |
| Total | $3,650 | $7,400 | $11,200 | 100% |
Why Dallas prices look the way they do
We price the labor side from BLS wage data for 3 trades: carpenters at 40%, construction laborers at 40%, sheet metal workers at 20%. Weighted together, Dallas wages are 0.88 times the national level. Labor makes up about 31% of the midpoint estimate (35% at national prices).
Materials are scaled with BEA's regional price parity for goods. Dallas is at 102.8 against 100 for the US, so a materials line of $4,900 nationally becomes $5,000 here (midpoint, 150 linear ft). Permits follow the all-items index of 103.1: $40 to $150.
The best months for aluminum fence in Dallas
Climate numbers on this page come from NOAA's 1991-2020 U.S. Climate Normals at the nearest suitable station, Dallas Love Fld (5 miles from the city center). They are 30-year averages, so any one year can run hotter, colder or wetter.
For exterior installation, the comfortable months in Dallas are October through May: 8 of 12. Outside them, June, July, August and September have an average daytime high of 90°F or more.
Dallas gets about 38 inches of precipitation in a normal year, including roughly 2 inches of snow. The wettest months are May, June and October (4.8 inches in October). Inside the workable window, January and February are the driest, at 2.6 and 2.8 inches. The station averages about 108 days a year at 90°F or above.
We do not adjust the estimate by month, because we have no reliable published data on seasonal pricing. It is still worth asking contractors whether an off-peak start date changes their bid.
| Month | Avg high °F | Avg low °F | Precip (in) | For this job |
|---|---|---|---|---|
| Jan | 58 | 38 | 2.6 | Workable |
| Feb | 62 | 42 | 2.8 | Workable |
| Mar | 70 | 49 | 3.5 | Workable |
| Apr | 77 | 57 | 3.1 | Workable |
| May | 85 | 66 | 4.6 | Workable |
| Jun | 93 | 74 | 3.8 | Hot |
| Jul | 97 | 78 | 1.7 | Hot |
| Aug | 97 | 77 | 2.2 | Hot |
| Sep | 90 | 70 | 3.1 | Hot |
| Oct | 80 | 59 | 4.8 | Workable |
| Nov | 68 | 48 | 2.9 | Workable |
| Dec | 59 | 40 | 3.2 | Workable |
Optional extras in Dallas
Add-ons start from national price ranges and are scaled by 0.95 for Dallas, which is the average of the area's wage index (0.88) and goods price index (1.03). The estimator above can add them to your total.
| Add-on | Local range |
|---|---|
| Add one gate (flat) | $190 – $860 |
Who does the work: Dallas trade wages
The labor line is built from BLS wage data, one trade at a time. This job draws on 3 trades. We compare each trade's local median with the US median, weight the ratios by how much of the job each trade does, and apply the blend to the national labor cost. For Dallas the blend is 0.88.
Carpenters (47-2031), 40% of the weighting: a median of $23.44 an hour, 20% below the US median of $29.12. The middle half of them earn between $20.98 and $27.40 an hour. About 9,480 work in the metro. That is 23.4 per 10,000 jobs, compared with 43.1 nationally, so expect fewer local crews to bid.
For construction laborers (47-2061, weighted 40%) the local median is $21.14 an hour, which is 7% below the national $22.66. The middle half of them earn between $18.19 and $22.79 an hour. BLS counts 29,670 of them working in the area, 73.3 for every 10,000 jobs (US: 70.5), so the local bench is about average.
Sheet metal workers (47-2211), 20% of the weighting: a median of $27.04 an hour, 9% below the US median of $29.71. The middle half of them earn between $22.13 and $30.48 an hour. About 2,890 work in the metro. That is 7.1 per 10,000 jobs, compared with 7.7 nationally, so the supply of crews looks typical.
A quick sensitivity check: moving the lead trade (carpenters) from the median to the 75th percentile wage adds about $140 to the midpoint estimate; the 25th percentile takes off about $90. That is a swing of roughly 1.2% to 1.9% of the total, which is useful for judging whether a bid reflects wages or something else, such as scope or margin.
Dallas-Fort Worth-Arlington has 4,049,800 jobs in total (BLS, May 2025), ranking 4th by size among the 300 metros on this site.
| Trade | Weight | 25th pct | Median | 75th pct | US median | Ratio | Level used |
|---|---|---|---|---|---|---|---|
| Carpenters (47-2031) | 40% | $20.98 | $23.44 | $27.40 | $29.12 | 0.80 | metro |
| Construction laborers (47-2061) | 40% | $18.19 | $21.14 | $22.79 | $22.66 | 0.93 | metro |
| Sheet metal workers (47-2211) | 20% | $22.13 | $27.04 | $30.48 | $29.71 | 0.91 | metro |
| Blended | 100% | 0.88 | |||||
Planning more than one job in Dallas?
Jobs that often go together with aluminum fence are priced below at their usual sizes, using the same Dallas wage and price inputs. Compared with national midpoints, vinyl fence comes out highest (−1%) and chain-link fence lowest (−6%); the gap comes from the trades each job uses.
| Project | Size | Range | vs. US |
|---|---|---|---|
| Vinyl fence | 150 linear ft | $4,550 – $9,050 | −1% |
| Wood fence | 150 linear ft | $2,850 – $7,350 | −4% |
| Chain-link fence | 150 linear ft | $1,500 – $5,750 | −6% |
| Inground pool | 450 sq ft | $35,000 – $109,500 | −3% |
Is Dallas cheap or dear? The local comparison
Of the five closest metros, all are cheaper than Dallas. Longview is the lowest at about $6,650 (midpoint, 150 linear ft), 135 miles away.
| Area | Range | Midpoint | vs. here |
|---|---|---|---|
| Dallas, TXthis page | $3,650 – $11,200 | $7,400 | |
| Waco, TX90 miles | $3,350 – $10,200 | $6,800 | −9% |
| Tyler, TX105 miles | $3,300 – $10,100 | $6,700 | −10% |
| Killeen, TX125 miles | $3,350 – $10,200 | $6,750 | −9% |
| Longview, TX135 miles | $3,300 – $10,000 | $6,650 | −10% |
| College Station, TX145 miles | $3,350 – $10,200 | $6,750 | −9% |
| Texas (statewide) | $3,500 – $10,700 | $7,100 | −4% |
| United States | $3,800 – $11,400 | $7,600 | +2% |
Out of the 300 metros we cover, Dallas ranks #128 for the cost of this job (#1 is the most expensive). Statewide, Dallas is 5% above the Texas figure.
Elsewhere in Texas
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Houston, TX | 3,289,720 jobs | $3,550 – $10,900 | $7,200 | −3% |
| Austin, TX | 1,293,690 jobs | $3,500 – $10,600 | $7,050 | −5% |
| San Antonio, TX | 1,126,880 jobs | $3,400 – $10,300 | $6,850 | −7% |
| El Paso, TX | 339,120 jobs | $3,250 – $9,950 | $6,600 | −11% |
| McAllen, TX | 296,700 jobs | $3,200 – $9,850 | $6,550 | −12% |
| Corpus Christi, TX | 192,580 jobs | $3,450 – $10,400 | $6,900 | −7% |
Metros of a similar size
Big cities and small ones price differently, so here is Dallas against the 4 metros with the closest total employment.
| Metro | Size | Range | Midpoint | vs. here |
|---|---|---|---|---|
| Chicago, IL | 4,513,280 jobs | $4,500 – $13,300 | $8,900 | +20% |
| Houston, TX | 3,289,720 jobs | $3,550 – $10,900 | $7,200 | −3% |
| Los Angeles, CA | 6,271,560 jobs | $4,300 – $12,800 | $8,550 | +15% |
| Washington, DC | 3,136,190 jobs | $3,900 – $11,800 | $7,850 | +6% |
Pick a size, pick a tier: aluminum fence pricing in Dallas
The cited range is split into basic, standard and premium bands, then scaled to Dallas. Bands overlap, because plenty of standard jobs cost as much as a light premium one. Sizes run from pool fence (100 linear ft) to 200 ft (200 linear ft).
Basic
$3,650 to $6,650
Standard picket or ornamental, 4 ft
Standard
$5,900 to $8,900
Ornamental pool-code fence, 4-5 ft
Premium
$8,150 to $11,200
Tall privacy slat or custom ornamental
| Size | Basic | Standard | Premium |
|---|---|---|---|
| pool fence (100 linear ft) | $2,450 – $4,450 | $3,950 – $6,000 | $5,500 – $7,500 |
| 150 ft (150 linear ft) | $3,650 – $6,650 | $5,900 – $8,900 | $8,150 – $11,200 |
| 200 ft (200 linear ft) | $4,900 – $8,850 | $7,850 – $11,800 | $10,800 – $14,800 |
Why two Dallas quotes can differ
Permit
A fence permit runs $40-$150.
Style
Aluminum picket runs $25-$50 per linear foot installed, ornamental fence $40-$75, and privacy designs $75-$130 (HomeGuide).
Soil and slope
Steep slopes and rocky clay can add $15-$20+ per linear foot in labor.
Get 3 local quotes
Tell us about the job and we will try to connect you with up to three local contractors for written quotes. It is free and you are under no obligation to hire. Your estimate of $5,900 to $8,900 for Dallas, TX is attached.
Detailed aluminum fence report for Dallas, TX, $9
The report lays out the aluminum fence numbers for Dallas, TX line by line, with the local wage and price inputs, permit and timing notes, a quote comparison sheet and the full method. Save your estimate above, preview page 1 free, and unlock the full report for $9 one-time, or get every report with CostLocal Pro.
Aluminum fence in Dallas: your questions
+How much does it cost to install an aluminum fence in Dallas?
For 150 linear ft, expect $3,650 to $11,200 in the Dallas area. A standard-spec job lands at $5,900 to $8,900. Small jobs usually cost more per linear ft and large ones less.
+What is the price per linear ft for aluminum fence in Dallas?
About $24 to $73.50 per linear ft for materials and labor, plus $40 to $150 for the permit if one is needed. The US range is $25 to $75.
+Is aluminum fence cheaper in Dallas or Waco?
Waco is 90 miles away. The midpoint for 150 linear ft there is $6,800, which is 9% less than Dallas ($7,400). Wage and materials indexes both feed that gap.
+How much of the bill is labor in Dallas?
About 31% at the midpoint, or $2,300 out of $7,400. Materials are 68% and permits 1%. Nationally, labor is 35%.
+What would 150 ft (150 linear ft) cost in Dallas?
$3,650 to $11,200. Pick a different size in the estimator above to get your own number.
+Does aluminum fence need a permit in Dallas?
Often, but rules are set by your city or county building office, so call before you hire. Budget $40 to $150 for fees in the Dallas area (our national range of $40 to $150 scaled by the local price level).
+Is Dallas expensive for aluminum fence compared with the rest of Texas?
Dallas is 5% above the Texas statewide estimate ($7,100 at the midpoint). We cover 21 metros in Texas; see the state page to compare them.
+What do carpenters earn in Dallas?
The BLS median is $23.44 an hour in the Dallas area, compared with $29.12 nationally. The 25th to 75th percentile range is $20.98 to $27.40.
+What do basic and premium aluminum fence work cost in Dallas?
For 150 linear ft, basic work runs $3,650 to $6,650 and premium work $8,150 to $11,200. Basic means: standard picket or ornamental, 4 ft. Premium means: tall privacy slat or custom ornamental.
+When is the best time to install an aluminum fence in Dallas?
Based on NOAA 1991-2020 normals, the comfortable months for this kind of work are October through May. January and February are typically the driest of those months. Local contractors' schedules matter as much as the weather, so book early for the busy months.
+What does "add one gate" add in Dallas?
$190 to $860, from a national range scaled by the local wage and goods indexes.
Aluminum fence near Dallas
Where these numbers come from
Base prices are national ranges from the sources below. We scale labor by local BLS wages, materials by BEA goods prices and permits by the BEA all-items price level. Full method on the methodology page.
- HomeGuide: How Much Does an Aluminum Fence Cost? (2026) (accessed November 4, 2026)
- HomeGuide: 2026 Building Permit Costs | Fees & Cost Calculator (accessed November 4, 2026)
- BLS Occupational Employment and Wage Statistics, May 2025
- BEA Regional Price Parities, 2024
- NOAA NCEI U.S. Climate Normals, 1991-2020
Note on derived figures: Materials = installed range minus HomeGuide's $10-$25/ft labor range.